Jump to content
Brian Enos's Forums... Maku mozo!

nbot

Classified
  • Posts

    54
  • Joined

  • Last visited

Posts posted by nbot

  1. I've been really liking RMR bullets of Everglade bullets.  They're cheaper than MG and work fantastically well. 

     

    You shouldn't need to go with a JHP bullet.  As long as the coating is good to 1500 fps you're okay with plated or coated too.  I've loaded heavy plated bullets and they worked great.  Some say the blue bullets work at 9 major velocities, I haven't tried them.

     

    If you're new to reloading, VVN 3n38 is a super safe powder to use.  Although your case will be fairly full with a 115 grain bullet.  

     

  2. 48 minutes ago, FFEMT said:

    Do you have any issues running 9 major. I keep getting talked out of a 38sc build. 

     

    The powder selection these days really make running 9 major not an issue.  If you can load the ammo long it does make feeding a lot more reliable.  I do think as 38sc is rimless you'll have less chances of binding.  

     

    depending on the region you are in, there seems to be more of a following on certain calibers.  We shoot a lot of 9 major here in the midwest.  South West / East seems to favor 38sc.  

     

  3. Anyone have experience building a private home "action pistol" range on your property?  Any recommendations for berm size for a U shape bay?  How many total yards of dirt did you end up bringing in if any?

     

    I would like to set one up this summer and have an idea of what to setup, but wanted to hear anything recommendations or should have done differently stories. 

     

    Thanks!

     

  4. 1 minute ago, Bullets said:

    If your gun isn't running lighter minor loads it isn't the load. It's the gun. Put a lighter recoil spring in. Then you should have no trouble shooting light loads. I used to run 5.6 hs6 with a 124gr prevision delta. I have since changed to a faster powder and lighter bullet though. 

     

    I hope it's not the gun - It's already running a 7lb recoil spring in it.  I didn't put that spring in, I'll verify that it's a 7lb and test again.  Thanks!

  5. Any good loads out there for a 5 inch comped gun in minor?  No barrel ports, just an IMM Titanium Comp. 

     

    I was trying HS6 and MG124's at 6gr and the ES would vary enough where functionality suffered on the low end, functioned great on the high end.  Bumping it up to 6.3gr Yielded quite a bit more gas for the comp but still not the best for cycling the gun.  

     

    What are you guys running on your minor comped guns?

×
×
  • Create New...