[Hodgdon CLAYS for IPSC PF]

straight Hodgdon CLAYS for IPSC PF

what's your load and OAL for MAJOR IPSC -----170 PF that's 180 x 945fs

[Titegroup load for IPSC]

4.7gr Tight Group.

Mixed brass

Fed small rifle primers

Zero 180 JHP

1.23 OAL

170PF or so

I find TG a bit dirty, so have switched to 4.3gr of Clays. Cleaner and Softer. Mark K

When you switch to 4.3 Clays did you keep the same OAL

i'm interested to try CLAYS out of my STI

but the thing is i won't be shooting a big match with a close to 170 ammo i like to go with 175pf just in case

i'm not sure i"ll be able to shoot Clays to that level...

phil

[Titegroup load for IPSC]

i'm looking for a good load and OAL for a STI edge

must make IPSC PF with 180 gr bullet

[What finish for my new 6" limited gun]

get the frame hard chromed and the slide blue like Robbie Leatham

[9mm major with 147gr]

hi

just looking for info

anybody uses 147 gr bullet with 9mm major setup

what load are you using

thx

philippe

[loading the .40 with lead bullet]

hi

i just started to shoot lead bullets in practice cause of the cost of FMJ and CMJ

i use hodgdon Longshot

5.8 gr on a 180 gr

at 1.145 OAL

wsp

STI edge

with a bar-sto barrel

i got good results since that cast lead come from wheel weight

i got bad results out of IMR 7625--

now i'm switching to medium-fast burning powders

gonna try UNIVERSAL and TITEGROUP

i what to check some other interesting load

with other powder

[9mm major setup]

hi

like the previous post on 9mm major problem

i would like to know what is your setup

my gun is at my gunsmith and i'm wondering if i made good choice for my setup

as far as it goes

SVI frame

caspian slide about the lenght of an Officer 38 super

serendipity C-more

STI mag with joey hardy spacer and Gram stuff

slide racker

5 port comp

aftec extractor

EGW long ejector

thx