Quack
-
Posts
954 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Quack
-
-
If it's on the list and under 45oz, then it can be used in both Production and Carry Optics.
-
That's from the inertia of the firing pin, but what about trigger bounce, which would be muzzle up.
-
The MecGar +2 pads are the ones that don't fit.
-
Just under 6" with the SP pads
-
Yep, there are other things that have happened more than a 320 getting dropped at -30°
-
Not sending mine in.
As for the folks that are saying it's unsafe because it can unintentionally go off if dropped at a certain angle, have you ever thought about the Limited and Open 2011's that have the grip safeties pinned? IMO, the chances of a gun going off when dropped is higher with 2011's with pinned grip safeties than the P320's -
Springer Precision.
-
Get a used Accu-shadow, if she likes the sp-01.
-
Accu Shadow 2
in CZ
I thought Stuart said getting an Accu bushing installed is legal, as the bushing is on a Production legal gun, and the milling is internal.
-
WTF Tapatalk went crazy.
-
I realize it's not a feature but it's sure a nice happening when my poor shooting leads to an unplanned slidelock situation. I didn't think I noticeably reloaded any harder on a slidelock but it is possible that I do.
I definitely plan to get the correct combo, just want to make sure I am finally getting them as I thought the Shockbottle ones were going to be it and now they will be sold with one match of usage. Near as I can tell the Springers are good to go, need to confirm the CZC will be fine with Mec-Gar 10/17 round mags.
Springer pads just make it. -
I realize it's not a feature but it's sure a nice happening when my poor shooting leads to an unplanned slidelock situation. I didn't think I noticeably reloaded any harder on a slidelock but it is possible that I do.
I definitely plan to get the correct combo, just want to make sure I am finally getting them as I thought the Shockbottle ones were going to be it and now they will be sold with one match of usage. Near as I can tell the Springers are good to go, need to confirm the CZC will be fine with Mec-Gar 10/17 round mags.
Springer pads just make it. -
I realize it's not a feature but it's sure a nice happening when my poor shooting leads to an unplanned slidelock situation. I didn't think I noticeably reloaded any harder on a slidelock but it is possible that I do.
I definitely plan to get the correct combo, just want to make sure I am finally getting them as I thought the Shockbottle ones were going to be it and now they will be sold with one match of usage. Near as I can tell the Springers are good to go, need to confirm the CZC will be fine with Mec-Gar 10/17 round mags.
Springer pads just make it. -
-
Are there any places to purchase the Shadow 2 adjustable factory rear sight? I saw one today and would like one for my shadow i'm thinking!
Hit up rowdyb, he had his milled for an LPA, so he may still have the take off
-
Shadow 2 grips
in CZ
All grips are interchangeable between the shadow 1 and 2.
Yes -
Just a hair under 6".
-
Nickel mags with SP pads are my main mags. MG AFC with SP pads are the rest of my mags.
I sold my factory mags and bought MG AFC's
Sent from my Nexus 7 using Tapatalk
-
.
-
Is that Production legal?
Yes, milling the slide for sights is legal.
-
-
Game on!!!
-
Is that hammer USPSA Production legal?
Sent from my Nexus 6P using Tapatalk -
My concern with that particular grip is that it's likely not production legal, depending on which base pads are on the gun. If you're using a standard profile pad, you could definitely see the rear bevel with a mag inserted. With something like the Obsidian, you likely would not.
It's still an excellent job.
Here's my rough work. Grip on left is a Medium, the right is a Large
Shadow Target 2 load recommendations
in CZ
Posted
I run 124jhp Montana Gold, and just started using Delta Precision 124jhp. Win231/HP-38 powder, Federal primers, mixed brass.