[+P+ in Witness pistols]

oops I thought he said 36,500 psi not 38,500 but I still say no problem compared to a 10mm

[+P+ in Witness pistols]

I cant see how the gun couldent handle 9mm +p+ it hadles 10mm with a sami presure of 37,500 psi. so smaller case = stronger barrel and smaller case at lower presure = no problem

[Witness Match 10mm. Ejecting Brass Too Far]

I have a 1omm match that I use for limited division and had the same problem with it firing brass into the next county I shortened the extractor about 1/8" and it helped a little then I installed a 40sw barrel for the cheap brass and the gun now ejects only about 6ft with the same powerfactor loads. I think it hase to do with the length of the 10mm brass picking up more energy as it is swinging out of the extractor.

[ultra cheap open]

anybody ever use one of the lone wolf comps? they have huge side cuts and only 3 holes on top so I wonder if they controll flip well" the lone wolf 6" barrel has 4 big "C" shaped holes in the top that should controll muzzle rise well enough

[ultra cheap open]

I have thought about 38 super as I have 2 others (a 1911 for single stack and a witness I use for production) the rounds fit and feed out of the mags well by hand but getting a barrel turns into a custom job and the cosdt go's up

I was thinking build on the cheep see if I like then build a competative rig if I get hooked also my g20 is a first gen so no rail. has anybody ever seen a 170mm extension for a large frame glock? with the 140's I get 21 reloadable easy I think I can mod the follower and maby get 22.

[ultra cheap open]

thanks for the input so far

I am not trying to build a competetive rig just a blaster to have fun with and try out the whole open gun idea

[ultra cheap open]

I am thinking about building a open gun on the cheap.

G20 I allready have gun and 140mm 21rd mags $0

lone wolf 4 port 6" barrel $130

aimtech scope base $58

tasco propoint 30mm 10moa dot $90

total investment $278

other option

use lonewolf threded barrel $115 and compensator(odd looking one) $55

total investment $318

what do you guys think?

[To all RCBS progressive users]

I second calling RCBS they will send you a new one asap. as a quick fix I just put a piece of tape across the bottom ob the plastic tabs to hold them tighter to the metal part. the other problem I have had is primers turning sidways in th plastic part and jamming things up making burrs in the plastic. I fixed this by drilling out the plasic part and inserting a short section of a old primer tube. now the primers slide through nicely.

[10mm Loads For Idpa?]

for low power 10mm try some trail boss under lead bullets I just ran a batch at 4.2 grains under a 180 lead cronoed at 750 fps. it was the cleanest least smoke lead load I have ever shot. the powder is to bulky to get enough in the case to make a major load but for minor I dont think it can be beat.

[dual port comp kit fromm EAA]

thanks for the info I think I will have to try ordering

[dual port comp kit fromm EAA]

I am interested in converting my old 38 super to a open gun and was wondering if anyone used the compped barrels from EAA ?

is it a drop in set up or is fitting required by a smith? if it is a drop in set up $229 seams like a good deal

any info would be great