scottli

My problems with HPs in super have all been feeding. never chamber. but thats always something to check for. leo Once I'm done with the 2k RN that I've been using, I'm switching back to 121 IFP. They reload well, feed well, and are accurate. Price is right too, almost the same price as some plated bullets. I picked up a 1000 of the 121 IFPs and can only load 14 or 15 or they nose dive hard. They feed great with a 1/2 loaded clip and are much more accurate then the 124 RN What AOL are you loading at that allows you not to have feeding issues?

No issue with the ports, as long as I don't over lube the barrel and slide the lens stays pretty clean.

I think Henning had Leo H do the flopflop

Finally Finished. Hope the pics loaded up. Thanks Henning & Leo!

Finally Finished. Hope the pics loaded up. Thanks Henning & Leo!

I got it. 3 hours later lol. The primer cup was not seated all the way. I loosed the hex turned the shellplate so it was in between dies then jacked it forward to depress the cup and spring, it seated further down. tightened it up and works like a champ. thanks for the help.

Using the small tube/Blue. Its dropping all the way in. The ends look fine. I tried the spare that was included with the same result.

I just got a new Dillon 550. Setting it up to load 38 super. Using Starline TJ Brass and Winchester small pistol primers. It wont feed the primers into the primer pickup. It will draw back and load one primer and then when it slides back to get the next primer it wont slide all the way back it stops right at the primer dispenser tube and white stop plug. its like half the primer is stoping it from going back. Any ideas?

Got a new V-12 with all the bells whistles coming from Henning. Ships tommorrow and will have my hands on it next week. Always been a 1911 guy so the I am clueless when it comes to the Tanfoglio. I ordered a new press from Dillon and I am getting ready to start ordering stock to reload in 38 super. Gonna get the Starline TJ Brass, IMR powder, and winchester primers. Im lost when it comes to ordering the bullets. Looks like 124/125 is the trick but what about diameter? Whats reccommended to feed this beast? 9mm .355 / .356 38 .356 38 .357 What do you guys suggest and where is the best places to buy the supplies? Thanks

Getting ready to order a Witness Gold Team and I am looking for some tips. Been a 1911 guy the Witness is all new to me. 1. Who should I order from? 2. What should I pay? 3. What is the usual turn around time for delivery? 4. 38 super or 40 any advantage or disadvantage? 5. Anything I should be aware of that will make the purchase unpleasant? 6. Are there 07 and 08 models? 7. Whats a V-8 and a V-12?? I appreciate any help. I prefer to get it right the first time.