Gary237 Posted September 21, 2007 Share Posted September 21, 2007 Hey All, I recently bought a DMW oversized safety button and seeing that it doesn't come with instructions....how do I install it ? Thanks . Gary Link to comment Share on other sites More sharing options...
martino Posted September 28, 2007 Share Posted September 28, 2007 Hey All, I recently bought a DMW oversized safety button and seeing that it doesn't come with instructions....how do I install it ? Thanks . Gary Hi Gary, i`ve done the same on both my M1s 1. Remove trigger group by knocking out cross pin. 2. At the very rear of the trigger group ( inside ) you will see another cross pin, drive this thro` with the correct size pin punch, be very carefull as theres a spring & ball inside the hole thats under tension and will dissapear if you don`t place your thumb over as you drive out the pin. 3. Once the pin is out turn over trigger group & shake/tap spring & ball out. Remove existing plate of end of Benelli button, this will be triangilar in shape, Safety button will then push out. 4.Assembly will simply be a reverse. eg. Button in first, start cross pin in part way just enough to locate in hole, insert ball & spring, spring will have to be depressed with pin punch as you knock in the cross pin ( a little bit tricky, three hands needed,) but beware if you let go spring will end up in orbit, and thats it Hope this helps martin Link to comment Share on other sites More sharing options...
BushBaby Posted September 28, 2007 Share Posted September 28, 2007 Let me know how you like that safety? i was gonna get one. Link to comment Share on other sites More sharing options...
HoMiE Posted September 28, 2007 Share Posted September 28, 2007 It helps if you put the safety in half way position as to releive a little presseure off the spring and ball when removing the pin and when putting it back together. Link to comment Share on other sites More sharing options...
martino Posted September 29, 2007 Share Posted September 29, 2007 Let me know how you like that safety? i was gonna get one. Hi Babybush! What i like about it is as you bring the gun up trigger finger rolls nice & smoothly over button and locates on trigger in one easy movement Link to comment Share on other sites More sharing options...
martino Posted September 29, 2007 Share Posted September 29, 2007 It helps if you put the safety in half way position as to releive a little presseure off the spring and ball when removing the pin and when putting it back together. Hi hoMie Well added Link to comment Share on other sites More sharing options...
Gary237 Posted October 4, 2007 Author Share Posted October 4, 2007 Thanks Martino and Homie, I will try replacing it tomorrow . I'll let you guys know how I like it . Gary Link to comment Share on other sites More sharing options...
BushBaby Posted October 5, 2007 Share Posted October 5, 2007 Sounds good i think Im gonna go around the block and pick one up from him then pretty soon!!! Thanks Let me know how you like that safety? i was gonna get one. Hi Babybush! What i like about it is as you bring the gun up trigger finger rolls nice & smoothly over button and locates on trigger in one easy movement Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now