Dimensions Of 650

[Marvin Gardens]

Hello. Can someone please help me with dimensions of a 650? I did a forum search and found the answer for height but and interested in width and depth. I have limited bench space after permantly mounting my 1050's and need to be able to switch out presses for other tools and operations. I have a couple of narrow cabinets beneath my bench with sliding tables (shallow drawers that will extend competely out of the cabinet) at their bottoms. I can store two 550's with strong mounts attached to a wooden base, edgewise on the sliding table. This set-up allows me to pull the table out of the bench and lift a machine to mount on my bench. When I'm not using one, I can set the press back on the table, push it back into the bench cabinet and close the door. I am considering a 650 ( but don't have one around here locally to measure) and am wondering how wide an opening I would need to slide a strong mounted press in edgewise, with and without the casefeeder.

Thanks

Bob

Edited January 29, 2006 by Marvin Gardens

[Carl Provan]

The width with roller handle is 12" 14" if you have the powder sensor. The depth is 14" also. This is to the back of the case feeder mount.

I hope this helps.

[Marvin Gardens]

The width with roller handle is 12" 14" if you have the powder sensor. The depth is 14" also. This is to the back of the case feeder mount.

I hope this helps.

Thanks very much, that does indeed help.

Bob