GMB Posted January 14, 2014 Share Posted January 14, 2014 area of upper receivers and railed hand guards for the M16 / AR15 family of rifles to address the demands of modern warfare and the needs of our modern war fighters this has resulted in several innovative products: CASV (adopted by U.S Navy EOD Teams) Gen 1 VIS VIS-A5 VIS KeyMod The VIS SL is the newest product in this evolution and is based on lessons learned from over a decade of continual combat operations. All VIS receivers are a monolithic railed upper receiver that are of polylithic construction, two components that are permanently bonded together prior to machining of the 12 oclock rail. This allows free f loating of the barrel without the increased stresses placed on the bolt and barrel extension portion of the upper receiver that traditional rail/ hand guard systems exhibit. Traditional rail/ hand guard systems have 100% of the rail / hand guard weight and the weight of any enablers used supported only by the barrel nut on the relatively short barrel extensionThe hand guard body along the 3:00 and 9:00 positions between the four short sections of fixed M1913 rails is slimed down offering the fallowing enhancements: The transition between the slim section and the fixed M1913 rails gives the shooter: Enhanced ergonomics, lowers the profile of the system in the primary griping area Integrated hand stop Integrated index points Integrated thumb rest / *thumb rest [generic]* The slim section is textured for enhanced grip to aid the shooter with: Driving the muzzle between targets CQB muzzle strikes CQB weapons retention Side bracing in a improvised rest ( window or door jamb) KeyMod direct mounting points at the 1:30 and 10:30 positions are not designed to accept rails they are optimized for low profile mounting of KeyMod enablers such as: Offset iron sights Offset Mini Red Dot (MRD) CQB sights Visible Lights The bottom of the hand guard along the 6:00 position incorporates the following features: Removable lower hand guard for M203 mounting Wide flat bottom that aids in a improvised rest No mounting points in the 4:30 and 7:30 this lowers the profile of the system in the primary griping area Full length KeyMod along the 6:00 oclock position VIS SL incorporates key features to support legacy M1913 enablers as well as emerging KeyMod enablers while also incorporating features that enhance the shooter to weapon interface in a slim and light package. No KeyMod holes are present in this area to eliminate the pinch and snag hazards they would present in a CQB environment. This texture is aggressive enough that many shooters dont feel the need for a add on hand stop or angled fore grip device in the 6:00 oclock position of the hand guard Link to comment Share on other sites More sharing options...
GMB Posted January 14, 2014 Author Share Posted January 14, 2014 Check out Competitive Action shooting sports on FB. The info about the new Vltor slimline vis is there with pics. Sorry I couldn't get them loaded here. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now