Jump to content
Brian Enos's Forums... Maku mozo!

How to- make a sling


Recommended Posts

So I just finished a month in Quantico doing basically a Marine Corps screener... I had a TON of 550 cord left over so I decided to try something out. Total cost- 4 bucks worth of cord and 1 hour.

This "sling" is pretty handy, cheap to make and simple to make and best yet it's made of 550 cord so for the SCAR's it doesn't scratch up the sling attachment points. You can make any combination of 550 chord you want. As you see my first pic is a bracelet w/ OD green and FDE mixed. The sling has as OD green core and black braid.

District1-20110623-00436.jpg

1- start with the desired length of cord loop, tie off with a simple knot. This is the "core."

District1-20110623-00437.jpg

*simple knot*

District1-20110623-00438.jpg

2- The length of braiding cord must be approximately 7 times the length in feet as the core length. ie- my sling is 4 feet long so my cord was approximately 28 feet. Find the middle of this length and place it underneath the core loop.

District1-20110623-00439.jpg

3- To start, make a "S" with one side of the braiding cord

District1-20110623-00440.jpg

4- Run the other side down into the bottom loop of the S, under the core, and up through the top side of the S

District1-20110623-00441-1.jpg

Link to comment
Share on other sites

*tighten it down, not super tight, but taught*

District1-20110623-00442-1.jpg

5- See in the above picture how one side of the braid is going down and under the core? From that side, make an S shape, in this case it's a backward S, this will be the alternating pattern.

District1-20110623-00443-1.jpg

*It should look like this after that second run through*

District1-20110623-00444.jpg

6- Continue braid until you have about a 1 inch loop left, as shown in the first pic. Now tie off with a simple square knot the remaining cord, and melt it down with a lighter to secure the knot. Using the side that is continuous and does not have a knot through it, run it through one of the sling attachment points.

District1-20110623-00450.jpg

Link to comment
Share on other sites

7- Next run that loop through the eye of the knotted side

District1-20110623-00452.jpg

8- Run the knotted loop back through the continuous loop and you have a pretty secure lock.

District1-20110623-00446.jpg

Tadaaaaa!

District1-20110623-00447.jpg

You can also make attachments and turn it into a 2 point. Total time approx 1 hour for this long of a braid.

:?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...