sray53txtn
-
Posts
0 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by sray53txtn
-
-
You've summed it up well. Every time I take it out of case rack slide. Realize it is a truly "excellent pistol".
Would probably kick myself.
Thanks
-
Has anyone here attended a USPSA match, saw some competitors shooting open with a CS TS40 (thought "Wow" that gun can shoot - I can do that) and jumped in with both feet?
I did and have not been to a match since. I really like/love the pistol, my absolute favorite of the 3 that I own.
Just more of a rifle (small bore, mid & LR) guy (older - can shoot prone rifle but running & up/down with old college athlete parts NG
) that had a sudden impulse for a semi-hot rod pistol.
Mine has the factory 40 and a 9mm barrel and mags - what should I do with it?
Lost in too many toys world and need help with direction.
Help a lost CZ brother.
-
Might have to try some 115s, all I had in bin were 124, 135, & 147gr.
-
I'm in the old fart category, not any particular pistol that and have started to like the Glock just fine now - thanks to some good feedback
.
Trigger time gets a little better each time to the range and it's in my pistol bag every weekend now. There is a definite difference in hold & trigger when I pick up the CZ SP01 Shadow. I like them both and respect their differences.
However, shooting and placing shots better with the G19 ALL GOOD - fun to shoot too.
No $3000 pistol, that's more like my Palma prone rifle cost.
-
Just an update and thanks to all who offered assistance.
I have been practicing hold and trigger pull since I last posted and have installed set of TruGlo Pro I-Dots, polished trigger parts, and 3.5lb connector.
Same loads at same distance, with more practice, better sight picture and trigger. Getting used to it really helps.
.jpg.ded0bea52f42f9b367f2a89b8a2dda99.jpg)
Thanks to all!
-
If/when you folks install a new trigger and sights on a G19, what brand and types are most highly recommended?
-
It is/will be my carry pistol. I will try the items mentioned. It did get better as I shot it.
-
50-60ft outdoors, standing 5-6" groups. My sight picture was ok-not great. Trigger squeeze and hold probably my biggest issue. Shooting 125gr Zero FPFMJ loads (my reloads - med power factor). Shooting left and low, by the fourth full mag things seemed to be a little better. So all this most likely me and unfamiliarity with the 19.
Advice appreciated - Thanks
-
First Glock in a decade + and got a Glock 19 Gen 4 FDE in trade on a rifle trade. It has 50 rounds though it (last owner).
My question: My only pistols to this point are CZ TS 40 and a CZ Shadow Target II. Shot the Glock for the first time today and was underwhelmed with accuracy.
My main competition is Palma and Small Bore prone rifle matches.
Any thoughts or recommendation on accuracy improvements?
New/Old Glock owner needs help.
Thanks in advance for any advice!
-
Even one of my High Master Prone shooter friends fired my CZ TS with bushing and he said "holy cra* that is really accurate I may have to shoot my pistols again".
I'm very pleased with both bushings I purchased for my TS & Sp01 Target2.
Unfortunately an addicting hobby!!!
David at CGW definitely has amazing customer service!
-
Just makes me shake my head. I will say that the X10 has made my groups in ALL 3 guns significantly smaller. Great part. Go all USPSA (if an option) and don't look back. You will learn to live without the cookiesJust heard back from IDPA and here's what they have to say about it being SSP legal:
"I am sorry, If the replacement part is exteriorly different than the factory part then it would not be legal for SSP. Even if it is only slightly different.
Robert Ray
International Defensive Pistol Association"
Kind of bummed me out, too bad.
+1
-
My TS with 40S&W & 9mm barrels were both more accurate with the new bushing that was an easy install, lined up perfectly.
My Shadow Target II was also more accurate, it's fairly new and getting right loads sorted out for it - groups definitely tightened up.
-
Just out of curiosity, does anyone else's factory TS bushing look like this? Pardon the crappy phone pics..
Yes, my factory TS bushing looked like that.
-
My TS .40 bushing is not cooperating. I've tried freezing the slide. I've tried the socket technique. It is not budging. How hard did you have top hammer the socket?
Did you get your stock bushing removed?
-
It doesn't have a lever, so it's lighter, can't be bumped to inadvertently lock the slide open and it's cheaper: $9 vs $35
Slide lock reloads are for IDPA guys, Open shooters race with suicide doors!
That's funny - made me think about an old 65 Lincoln Conti I used to own.
-
Glad I grabbed a couple for my CZs.
They should be a "hot" best buy for a while!
-
Here's my 40TS, now has a 9mm barrel as well. What a fun pistol.
-
Not sure exactly what your looking for, however, here's 4 different shots of my Factory TS 40 slide bushing.
There was not much a lip to drive against and why I had to add electricians tape to my socket so it would contact the inside diameter of the bushing,
-
After the front sight pin was removed on my TS40 slide, just secured the slide a padded vise, used my tape wrapped socket with small extension and large brass drift with 1lb hammer and when all lined up behind the bushing, struck it three times and it was out.
I had my slide with bushing facing down toward carpet so when it came out it landed on the carpet directly below. I can shoot you a pic of my removed factory bushing if it would assist you.
-
Got it & Stuart from CZC replied.
Thanks
-
Have a question on the rear target sight that I just installed:
Understand how to adjust for elevation, what's the trick for proper windage (don't want to break anything) adjustment?
-
I used a wrap of electrical tape on my 10mm 1/4 socket as my cushion and it drove right out once I had it sized correctly.
-
Got them (9mm barrel & new adj rear sight) installed today, took my time and have a nice snug lockup. Try to get some rounds thorough it on Sunday.Ordered my TS 9mm barrel, mags, & adj-rear sight last night.
Curious, is your barrel all black coated instead of plain? I got a spare barrel from CZ USA and it is black with the serial number on the left instead of right.
The one I ordered from CZ Custom was black with S/N on the left side.
The 9mm barrel was not a bad DIY to install and I was was quite impressed with accuracy and function.
-
Ordered my TS 9mm barrel, mags, & adj-rear sight last night.
Got them (9mm barrel & new adj rear sight) installed today, took my time and have a nice snug lockup. Try to get some rounds thorough it on Sunday.
) that had a sudden impulse for a semi-hot rod pistol.
.
.jpg.ded0bea52f42f9b367f2a89b8a2dda99.jpg)
50-60ft outdoors, standing 5-6" groups. My sight picture was ok-not great. Trigger squeeze and hold probably my biggest issue. Shooting 125gr Zero FPFMJ loads (my reloads - med power factor). Shooting left and low, by the fourth full mag things seemed to be a little better. So all this most likely me and unfamiliarity with the 19.
Entery level production pistol
in "Other" & Pistol Comparisons
Posted
I was interested in getting back into some USPSA matches & looking at Garand Power and Q5. Buddy of mine is getting out of pistol shooting has a like new (one 50 round box of Aquila 124 FMJ through a Canik TP9 SFX with a Vortex Viper included for $500. Is it worth taking a run at it with this. I'll never be Ntl Champ, just want to re-engage.