fyr4efect
-
Posts
18 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by fyr4efect
-
-
Have a GMR-15. No thermal. Roller trigger love it. Waiting for a can. Just ordered the LTC-19 in 308. Talk to Ben at JP. Wealth of knowledge.
-
Ive had a FX-9 for the past year and it has been very dependable and accurate. Just got my GMR-15. Amazing. I see why competition shooters like these.
No experience with MPX.
-
-
18 hours ago, drysideshooter said:
I finally had a chance to work up a load for my new GMR-15. I have a lot of MG 124CMJ's and WSF on hand, so thought I would start there. I ended up at 4.9 grains of WSF, loaded to 1.120" OAL. I'm getting a consistent 1,100fps. I'm happy enough with it to use that load to get some rounds through the gun. One of the things I enjoy about having a range at home is the ease of working up loads. I left a target and chrono set up and slowly worked up to the 4.9. It was a little more WSF than I was anticipating based on WSF loads I've used in handguns.
I think I may switch to MG JHP's once I run through my remaining CMJ's. It sounds like quite a few of you have had good success with JHP's?
I really like the GMR-15 so far. I currently have the standard short stroke SCS with 5 steel. I think I will order a couple of the tungsten weights to experiment with. Shooting a USPSA target at 20 yards yesterday it was easy to get 2 A zone hits as quick as I could pull the trigger, but I think I may be able to tame the muzzle rise a bit further. Will be fun to try anyway.
Currently thru my FX-9 8" with PD JHP 124 gr, WSF 4.9, OAL 1.110, 1100 fps. Switched to 147gr JHP Everglades 4.1gr ,1.130, 950 fps. Noticeably less recoil and subsonic. Got a can comming and a GMR- 15. Also use coated SnS 147 FN with same specs but cheaper.
-
Have over 5000 trouble free rounds thru my FX-9 8" barrel. Put a CMC flat drop-in trigger. fist size groups at 50 yds and still hit steel at 100 off hand. Amazing pistol for 650.00.
Have a cyclops PA prism scope with a Vortex 3x mag. Prefer a red dot but astigmatism prevents. Did add a can. Still in jail.
-
On 8/14/2019 at 12:49 PM, Fasthenk65 said:
Its hitting the ejection port. Not unusual. Its gone after reloading.
-
On 12/20/2019 at 10:10 AM, brian45acp said:
thank you, I am going to save that right now
http://www.shooterscalculator.com/ballistic-trajectory-chart.php?t=10bd88a7
Im using PD JHP 124gr. 4.9gr WSF 1.111 oal. 1200 fps. At 100 yds I hold 3-4 " or top of 8" steel. I have this app on my phone.
-
On 2/27/2020 at 10:54 AM, Chefcg1 said:
I have had my FX-9 8" for a little over a year now and love it. has run flawlessly with about 500 rounds through it, a mix of 115gr from various manufactures with no issue. I have changed out a lot of the cosmetics and added a rise armament ra-535 trigger along with a $1.50 of quarters in the buffer tube . currently switched sights out to holosun 510gr. great range toy that is a nail driver!
I have the FX-9 8" also. Stock buffer. What have the quarters done for your buffer?
-
I use PD 124gr JHP, WSF 4.8gr. Clean after every use and its never that dirty.
-
PD 124gr JHP. 4.8gr WSF. 1.111 oal. PF 148. Going to tone it down to sub sonic when my stamp arrives. FX-9 8" barrel.
-
Ive shot 147gr 3.5gr tite group, soft. My regular is PD 124gr JHP 4.8gr WSF. PF 148. Not so soft. I will probably tone it down to sub sonic when my suppressor gets out of jail.
-
I have a FX-9 8". It has become my most fun gun. I shoot my own reloads. PD 124gr JHP. 1200 fps. Put a CMC flat trigger 3.5 lb drop in. Big difference in shooting. Shoots as fast I pull the trigger. No malfunctions. It doesn't like the SMG 33rd mag that came with it. Jamed. Freedom Ordinance no longer uses SMG and is replacing my SMG mag with an ETS. I have been using Glock 17rd mags with 0 issues.
-
FX-9 8" $650.00 very reliable. Shoots everything I put thru it. Doesnt like the SMG big stick mag. Freedom Ordanance is sending a ETS mag replacement.
-
have the CMC 3.5lb flat 'drop in' in my FX-9 8". Amazing difference. Best upgrade.
-
On 2/8/2020 at 5:37 PM, BSmith said:
Sunday March 8th at Ben avery shooting facility. Registration is now open on practiscore as the Phoenix pcc challenge. There is more info on facebook under Phoenix pcc Challenge. There is also more info on this topic on this Brian Enos topic.
Not a facebook member but will be there to watch as Im new to PCC. Thx for the info.
-
On 7/24/2019 at 6:23 PM, BSmith said:
If you shoot steel you need to check out the Phoenix pcc challenge man on man match!!
What time and where?
-
PD 124gr JHP OAL 1.111, Everglades 124gr JHP RN oal 1.125, all feed no problem in FX-9 8".
Favorite Powder for PD 147 FP
in 9mm/38 Caliber
Posted
I use everglades 147 JHP, 4.1 WSF, 1.116 oal, 950 fps. Dont care for 147gr Noslers.