Baldwin
-
Posts
20 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Baldwin
-
-
I wish I had the frontal lobe function to find someone selling 10k primers for $760.
-
I've been shooting Bayou's 120gr. truncated cone bullets over 3.6 gr of Titegroup with an OAL of 1.030". Pretty dang accurate.
-
My Shadow 2
in CZ
Looks great! I have the Lok palm swells on my Shadow 2 and they're a little thick for me too so I'm going to try the Armanov grips. Where did you get the mag well?
-
With the CZs shorter leade, I had to reduce the OAL slightly for my 9mm reloads to chamber in my Shadow 2. I had the same situation with my .45acp reloads when I got my 97B. I use a chamber gauge but when working up a round, I make sure it will plunk in the S2 or 97B. If it does, the round will work in any of my other pistols. Once the OAL is correct both pistols will run like a raped ape.
-
20 hours ago, anonymouscuban said:
Are you seating and crimping in the same die?
If so, check to make sure the die is set correctly. That was my issue. The die was set too deep and was crimping the case before the bullet was seated. I adjusted it like suggested by a few and resolved the issue completely.
Sent from my SM-G930U using Tapatalk
No, I'm seating and crimping with separate dies.
-
I'm having this same issue on a Dillon 550C and Dillon dies. I've just started loading 9mm 120gr truncated cone bullets from Bayou Bullets. I cannot seem to consistently seat a bullet without scraping off a little of the coating. I've been adjusting the flare but cannot seem to find the sweet spot. Pretty frustrating. I do wet tumble and use Armoral Wash and Wax. Any help would be appreciated.
-
Welcome! I'm from your area myself - see the username.
-
-
Probably a nice gun, but for slightly more than $2500 you can probably get an Alchemy Prime or maybe even a Les Baer.
-
On 2/21/2019 at 10:32 AM, Mcfoto said:
Like the OP, I came to this sport late in life. Like the OP, I ache in the morning, can't see too good, and since I've had a tussle with the Big C, my bod's been carved, radiated, and injected with toxic chemicals. But for some reason, this sport gets me going. It's probably the adrenaline rush of running a stage. Am I ever going to win? No, I'm starting to doubt I'm even going to make it out of D class. But I'm still getting out there. BTW, I've seen guys a whole lot older than you and me who need a cane to walk between stages, but there out there slinging lead.
Thanks for your comments.
-
-
CZ Trigger
in CZ
Thanks guys.
-
On 3/9/2019 at 3:35 PM, elguapo said:
Holy s#!t that is SO full of win! That's what I want to be like in 30 years.
Now that's inspiring!
-
CZ Trigger
in CZ
9 hours ago, billthemarine2862 said:I am a big fan of the sig p226 and the cz/tanfo platforms. My personal opinion is that out of the box a sp-01 will be easier to reach the trigger than a factory 226. The grip circumference will be smaller for the sp-01 as well. Starting from half cock with a sp-01 tactical the DA pull will be lighter as well. While a sp-01 with a safety will have a similar pull weight but, I feel that cz has a better stock DA pull. The reset on a sig with the SRT will be shorter and much more crisp though than any out of the box factory cz. The lower bore axis of the cz will mean your gun will come back on target faster with the sp-01. The overall quality of a sig is superior to a SP-01, again just my opinion here. The other big difference is the way you you hold a sig in relation to the target compared to a CZ. You can do more of a lollipop style hold with the cz unlike the sig with factory sights where you are holding more center mass on the target.
It will be easier to improve the trigger of a cz vs a sig p226 as well. Bringing the overall pull weight down even more than with a sig it is definitely not hard to get the cz SA reset close to the sig in terms of distance and far lighter in pull weight. I shoot cz's and Tanfo's at matches but keep a sig bedside if that tells you anything.
Great info! This is what I was looking for. Many thanks.
-
CZ Trigger
in CZ
I live in a rural area and the few gun stores in my area do not carry CZs and none of the guys I shoot with have a CZ. I'm wanting to get a SP 01 Tactical or maybe even a Shadow 2. I have no qualms with buying a gun online sight unseen but I'm curious about what to expect with the trigger on a CZ. I have a Glock, two P series Sigs and a Dan Wesson 1911. I was wondering if anyone could tell me how the trigger on a SP 01 Tactical, out of the box, would compare to the trigger on say a P226? I was thinking specifically about the crispness and the reach. I have smallish hands and have installed thinner grips and short reach triggers on both of the Sigs. I know this sounds like a crazy question, but any info will be appreciated.
-
On 12/9/2018 at 8:37 AM, Baldwin said:
New forum member. I'm a member of a bunch of forums but this has become my favorite. Question:
I'm 65 years old and took up handguns/reloading about two years ago and the wife says I'm obsessed. I hurt all over when I get up in the morning, my hand/eye coordination is not as good as it once was, and my vision sucks but I still have my competitive nature. I would like to take up some form of competitive shooting but I don't want to embarrass myself. I'm about to retire so I will have a ton of time for shooting and training. Would it be a waste of time? Am I too old to get involved in competition? Honest answers please. Thanks in advance.
I did retire the end of the year. I'm able to shoot in the backyard but I've also joined a local range. I'm shooting about 200 to 300 rounds 4 or 5 times a week. I've been doing a lot of training using drills of seen on this forum and other internet sources. I don't know how good I can get, but I'm having a lot of fun. I really appreciate everyone's input and encouragement. One thing I've learned about handguns and reloading is that both activities draw good people who are very helpful.
P. S. While taking up this new activity has made my age painfully obvious, my 41 year old wife is keeping me young in most other areas.
-
I'm a Dillon newbie who recently made the move from a Redding T7 press to a Dillon RL 550C. So far, I've probably loaded about 1500 rounds on the 550 and I really like it. The powder measure is working well and throws very consistent charge weights but seems to make a lot of noise. The movement of the fail safe linkage and the powder bar is not smooth. I have double checked the installation and how the fail safe rod is adjusted and don't see anything wrong. This may be normal. I used a Hornady LNL measure on the T7 and it operated smoother, but was a totally different design. Any comments will be appreciated.
-
I really appreciate all of the responses. You guys have made me feel better. As I mentioned, I have a competitive nature but for me, shooting competitively is not going to be about being the best. I just need to know that if I set realistic goals that I can improve, get better. I'm ok with not being very good if I'm getting better.
-
New forum member. I'm a member of a bunch of forums but this has become my favorite. Question:
I'm 65 years old and took up handguns/reloading about two years ago and the wife says I'm obsessed. I hurt all over when I get up in the morning, my hand/eye coordination is not as good as it once was, and my vision sucks but I still have my competitive nature. I would like to take up some form of competitive shooting but I don't want to embarrass myself. I'm about to retire so I will have a ton of time for shooting and training. Would it be a waste of time? Am I too old to get involved in competition? Honest answers please. Thanks in advance.
-
I live in south Alabama and reload in a metal utility shed. When I got into reloading, I too had concerns about rust. I bought a mount/riser from Inline Fabrication with their "quick change" system. Basically, the mount is made to accept a plate that is bolted to the base of the press. The system is primarily aimed at people who want to use multiple presses on the same mount. I use a Lee Breechlock to deprime and a 550 to reload. When not in use, they reside in a docking plate (again Inline Fab) that is bolted to a wall in my closet. Moving my presses in and out of the house is pretty easy, but it might be tougher with a 650 or 1050. This system also frees up my workbench for other uses.
-
Hello everyone. I'm an old buy but a relatively new handgun shooter and reloader. I've been lurking for a while and this forum looks like a great place to learn stuff in both of those areas.
Preferred Shadow 2 Bullet Profile
in CZ
Posted
It has to do with the bullet profile. If I load with an oal over 1.040 it won't chamber. Ran into a similar issue when I bought my 97B.