EDWARDTK
-
Posts
16 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by EDWARDTK
-
-
On 6/26/2019 at 8:03 AM, Trinimon said:
I bought an extended mag release from Patriot Defense that's nicer to work than the factory one.
For the extended safety, I picked up the Tanfoglio Custom extended ambi-safety.
The extended ambi safey pictured looks like what came in my xtream but I may be wrong... Also the pd mag release you posted looks very nice. I am going to pick one up for sure
-
On 6/25/2019 at 8:03 AM, HesedTech said:
Hmm, I have no idea then because the size is quite big and I have no problem on my TFs using my left thumb to manipulate the safety.
You will have to describe your issue with activating it.
My stubby thumbs don't reach the lever to deactivate the safety when gripping the pistol.
-
34 minutes ago, HesedTech said:
Get the Henning Flat trigger and don’t try to fit something that wasn’t designed for the gun.
BTW you can work the trigger bar plunger out without removing the trigger assembly, but it’s a PIA and requires getting that little retention pin out, so it’s a whole lot easier to just punch out the trigger roll pin and watch out as the return spring goes on a trip.
Your gun should already have the right side safety extension, just not as long as the left.
It does have a right side safety I cant seem to activate it with my thumb
-
On 6/22/2019 at 9:51 PM, Chris_C said:
I have the same gun and am left handed too. It seems the best you can do for safeties is Tanfo part number 102117. The right side safety won’t be as big as the left side that’s on the gun now.
As far as flipping the safety, you have to almost take the entire lower end apart. The trigger has to come out then you can pull the magazine catch plunger out. I installed a CGW Canik trigger pin when I put mine back together. The slave pin that comes with the CGW pin makes reassembly a lot easier (the hard part is getting the trigger and trigger return spring back in).
Does the cz canik trigger from cgw work in the limited custom?
-
Thank you!
-
5 hours ago, muncie21 said:
I hope it didn't take a year to get your pistol fixed, but glad it worked out for you
It did not... lol forgot to update
-
UPDATE:: Sent gun back to cz turns out slide lock was interfering with mag body causing mag body to cant inside the frame and effectively jamming mag body inside frame. Fixed and gun runs like a clock. Thanks for all the help.
-
Welcome!!
-
7 minutes ago, billthemarine2862 said:
Congrats on your purchase!
If you follow the MM videos online and do a complete disassembly, when doing the reassembly you just flip the mag catch to the other side...
I do not have an answer about the safety though.
Thank you sir! Being a southpaw sucks sometimes!
-
Just bought a new limited custom xtreme in .40 s&w. Does anyone have any videos or info on how to switch the mag release to the right side of the gun? Also, does anyone know of an extended safety with a larger paddle on the right side of gun?
Thanks for the help!!
-
7 hours ago, manolis said:
I think that the followers is the problem .
They touch the slide stop (the semi round place that hold open the slide when the pistol is out of rounds).
I believe you are right. With the slide stop removed mags fall free. With slide off and slide stop installed you can see where followers are hitting slide stop and shifting mags making them hard to remove. Regardless I sent the gun back to cz
-
Took grips off. Mags still get stuck. Removed mag brake neither helped
-
Called cz USA. I am sending gun back to cz to me it's really unusual that the mags would fall free with the slide off but hang up with slide on
-
Also, if I load a round Into the mag it falls free just fine. Would this indicate a follower issue?
-
Hi all. New here and new to uspsa. Bught a cz ts yesterday. Took it to the range for a very short 100 test. Gun performed well but mags are getting stuck. Gun is out of the box stock. bseplates are not hitting magwell. Mags fall free when slide is off. As soon as slide is replaced the problems start again. All three factory mags do this. Any help would be greatly appreciated.
-
Hi all from western pa. Thanks for adding me. I have been shooting some local unsactioned idpa matches for the last two years. I shot my first local uspsa match last weekend and im totally hooked! Thanks again for the add!!!
-
Hi all. New here and new to uspsa. Bught a cz ts yesterday. Took it to the range for a very short 100 test. Gun performed well but mags are getting stuck. Gun is out of the box stock. bseplates are not hitting magwell. Mgs fall free when slide is off. As soon as slide is replaced the problems start again. All three factory mags do this. Any help would be greatly appreciated.
Music in earmuff
in Little things I've Noticed
Posted
Sounds like something I could see myself trying for sure!