7ender
-
Posts
12 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by 7ender
-
-
Has anyone had any success bending the lips of the .40 mags to match the 9mm opening?
In my location I can't get new mags, but I can use those I have...so modification to convert to 9mm would be much preferred if possible.
-
9mm TS Barrel
in CZ
22 minutes ago, ohsevenflhx said:Link is no good, but I assume this is to the 9mm CZC barrel?
-
9mm TS Barrel
in CZ
Hi all,
Anybody have any recommendations on where I can get a 9mm barrel for my .40 TS?
I've checked CGW, CZ USA, etc but haven't found one. I know there are some Czech sites out there that will ship to the US but I'm not familiar with them.
CZC has their version of the barrel in stock, but I'm not sure if aside from minor fitting expected if it'll work for a .40 to 9mm conversion, so if anyone knows that would be helpful also.
EDIT: AND I'm an idiot. Just read the other thread on a similar topic where somebody confirmed this barrel worked for them with standard barrel fitting.
Or lastly, if anyone has one they aren't using, I'm happy to pick it up off of you.
Thanks!
-
For how much of a "game changer" this was supposed to be, I haven't really seen many reports on here. Not saying this is good or bad...just had expected to hear more feedback.
Anyone else shot theirs yet?
-
I installed this today into an Odin Zulu and quickly realized the combination wouldn't work due to the secondary buffer spring collapsing we'll before the magnets release. Does anyone have any experience deleting the Zulu's secondary spring, with a spacer of some sort?
Or perhaps picking up a pistol buffer tube, but then I don't think I'll get the length of pull I'd want with the Zulu shoulder piece.
-
7 hours ago, snipaz2420 said:
where did you purchase the putty and shot if you don't mind me asking?
Yep- as Nick said, Amazon. Think the putty was like $15 and the shot was $20.
-
On 5/17/2019 at 5:14 AM, Novagunner said:
How hard is it when it cures? Does it get eaten up by mag insertion?
So far so good. I saved maybe an 1/8" of space at the bottom to fill with epoxy, so there's a good structural layer of epoxy guide the mags in.
-
1 hour ago, Jamese35 said:
My limited gun has tungsten packed I. The backstrap aswell.
Yeah, always effective but I feel where this really shines is in CO classes, where we can't just stick a fat brass magwell on where the weight is more effective.
-
1 hour ago, cjmill87 said:
How much did the tungsten putty and shot cost?
~$35, so no more than a typical brass slug.
-
Saw a post by geraldskip wondering how to get more weight in the gen 3 Glock grip so I thought i'd post what I did.
I was able to get a little over 5oz flush fitting in my gen 3 glock 17 grip. Previously had a 2 ounce grip plug in it from Dawson.
I bought tungsten putty and tungsten shot (for the higher density) and mixed them together. Then lined the inside of the grip with a thin layer of epoxy, and shoved it in. Once inside the tungsten putty allows it to mold to the backstrap shape. Added a little more epoxy after insertion to lock it in. Once cured, sanded the epoxy flush and painted. Can't even tell it's there unless you really look, and the shape of it acts as a small magwell.
Don't have any pics of finished product but do have a couple of the in progress. Could up the weight even more by increasing the ratio of tungsten shot to tungsten putty.
-
Can't seem to post here for some reason...i'll make a thread.
TSO 40 to 9mm easy as barrel, mags and GR spring(s)?
in CZ
Posted