Excursion12
-
Posts
46 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Excursion12
-
-
Do you have a pic of the plate mounted with the SRO? Did your legion have 3 sets of holes or just two?
-
Is this the tool you are looking for?
https://www.egwguns.com/1911-delrin-plunger-tube-stake-in-tool
-
Why are you averse to the aluminum frame? I have the aluminum guardian and have shot thousands of rounds without issue.
-
Does it get stuck on the mag when you push it down? I had to file out a little of the maglula to get it to lift off of my .40 2011 sti mags.
-
On 8/11/2020 at 11:15 PM, 22h2 said:
Thanks Excursion12, is the base plus 1?
It is the 4mm basepad. It basically is plus 1 but I don’t think they list it like that. Sorry for the delay, didn’t see your question.
-
I have been running Gen 2 STI mags. Dawson has been the best pricing I can find now. TTI base places and Grams springs and followers.
If you wait for a TTI sale, you can get the whole set up for about $105 each. Slightly cheaper than MBX and I can get 20 reloadable.
-
On 7/1/2020 at 4:01 PM, LuvDog said:
Somewhere on the site there is a picture of what you need to do the the maglula to make it work better. It's a few minutes with a dremel and you're good to go.
Anyone know where this picture is?
-
I have never seen winchester #41 before, only CCI. I don't need any right now, but feel compelled to order some!
-
What do you call the extra notes musicians play at the end of songs when they are improvising?
extension chords
-
This is good info. I found that my TTI extensions wouldn't work on the tactical mag well either. When you say alpha base pad, do you mean these worked?
-
MSC direct will be very reliable. If you watch their flyers, they put various brands on sale. They will not likely be the cheapest unless you catch it on sale one month. But I would have no doubt they sold the real deal.
-
On 2/20/2020 at 6:21 PM, anonymouscuban said:
I dry fire while on the toilet.
Sent from my SM-G930U using Tapatalk
With the scarcity of TP these days, this just seems like good practice and preparedness....
-
9 hours ago, C_Tanner said:
I ground a little spot down and was able to peel it up with a pick. it is a MAJOR pain, but totally worth it. I shoot a good bit of matches and dryfire almost every night. so about 9-10 months is all I get out of silicone carbide. its still grippy when I pull it off but nothing like when its fresh.
What adhesive are you using to hold it on that peels back? Is it tape, or the epoxy and powder that you sprinkle on? Didn't realize this was removable and am now interested since I can redo it if I screw up!
-
I agree, I’m thinking about getting into carry optics and it’s difficult to locate all the relevant posts.
-
On 9/27/2019 at 10:49 PM, 45 Raven said:
Do you mind sharing your load and PF on the hand loads that helped the reliability of your MPX PCC?
124 Grain Precision Delta JHP or RMR 124 FMJ
Seated 1.13
AA # 5 6.0 grains or
W231 4.4 grains
Both of these seem to be working well and are pretty soft shooting.
I found some Autocomp loads that were pretty nice shooting, but didn't shoot enough of them to say for sure they are reliable.
I tried some N320 loads, but couldn't get that powder to work reliably.
The only issue I was having is failure to feed. The round would go vertical in the chamber trying to load.
Happened with all bullet profiles and lengths if they were light, fast powder loads. Running the gun wet also seems to help with this.
-
I found loading a little hotter and running the gun wet makes my mpx pcc more reliable.
-
4.8 grains N320
zero 200 gr FMJ
1.2 oal
makes 170 pf out of my 5 inch gun
-
On 9/19/2019 at 4:37 AM, mjl said:
Highly recommend that you check out the BUL armory 1911s and 2011s. They make an awesome 2011 for EDC which I never would have expected.
I have several 2011s, but will take a look at their 1911. Would you say they are close to Springfield or nighthawk in build quality?
-
On 9/19/2019 at 3:58 AM, perttime said:
Any budget? Many seem to be happy with Baer 1911s.
Do you expect to ever mount something on a rail?
About 3 k. No particular plan to mount a light, I would either go short or no rail.
-
What does sight block refer to? I see it on the titan site, but they don't really explain it.
-
1 hour ago, Hi-Power Jack said:
I can't wait to get to 45 years old
Does that mean you're going to buy yourself a .50 for your 50th birthday ?
That is not a bad idea!
I missed out on the .44 mag this year.
-
For my 45th birthday next year, I plan to get myself a nice full size .45.
I know that I want some things, checkered front strap, mag well etc.
I am undecided on half rail or no rail.
For sure want a full size 5" steel gun.
I am considering things like the Springfield TRP, Dan Wesson discretion and maybe even a Nighthawk if I can find a good enough deal.
I have plenty of time to work it out and want to get something that shoots great and is a pleasure to own. Trying to keep it under $3,000.
What do I need to watch out for that would prevent me from using this gun in single stack? I normally play in limited, but might want to try a single stack match some time.
-
5 hours ago, RangerTrace said:
They make one for a commander......
Can you point me to that commander tool less guide rod?
-
On 7/28/2019 at 8:48 PM, DoctorH said:
That's what I'm trying. Do you have the grooves in the receiver races, too?
Mine doesn't have any receiver damage. Just have that round go vertical into the chamber. Going to try some different profile bullets this week, but not holding out much hope.
What aftermarket trigger are you using on your X5 Legion?
in Sig
Posted
What would you recommend that is comparable?