alvo89
-
Posts
30 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by alvo89
-
-
https://www.dropbox.com/s/9xkw9g3f9cv6n69/IMG_20170803_024529.jpg?dl=0
Here are the springs. Left is a little under 1.25" and right is little over 1.25"
-
https://www.dropbox.com/s/9xkw9g3f9cv6n69/IMG_20170803_024529.jpg?dl=0
I'm still figuring out how to post pics on this forum but you can see it on that link.
The ends of the left spring are cut be flat. Right spring ends are just cut and twisted to an end.
-
Ah, one of them is in the gun right now. I'm reloading at the moment but I can strip it down pretty quick (your vids are plenty helpful Memphis
).
-
I can get some. What do you need pics of specifically? I do know the shorter spring that isn't in the gun is a little under 1.25" long.
-
Title pretty much says it. I just got a Tanfo Stock II and was installing the Wolff 13lb hammer spring from my Witness upgrade kit. However after a long day I had a lapse of focus and mixed up the stock hammer spring and new Wolff hammer spring so I'm not sure which one I installed/replaced. I do know that one I put in the gun with the other upgrades is longer than the other. I tried squeezing each of the springs and the longer one felt lighter i think. Gun functions perfectly. The DA pull "i think" feels lighter however it's not substantially lighter so I cant say for sure especially after mixing up the springs.Anyway can anybody help me or know their hammer springs? Any help is appreciated.
I will be installing a new sear, hammer, and BOLO soon so I will have to disassemble the gun again at some point.EDIT: I think I got it figured out. Longer spring is the 13lb Wolff hammer spring, I could feel the DA pull more smoothly by way of being lighter, still gritty with the factory parts and could use more polishing. With the original shorter spring, you could really feel the wall towards the back of the DA pull. Mistakes made and lessons learned.
-
Title pretty much says it. I just got a Tanfo Stock II and was installing the Wolff 13lb hammer spring from my Witness upgrade kit. However after a long day I had a lapse of focus and mixed up the stock hammer spring and new Wolff hammer spring so I'm not sure which one I installed/replaced. I do know that one I put in the gun with the other upgrades is longer than the other. I tried squeezing each of the springs and the longer one felt lighter i think. Gun functions perfectly. The DA pull "i think" feels lighter however it's not substantially lighter so I cant say for sure especially after mixing up the springs.
Anyway can anybody help me or know their hammer springs? Any help is appreciated.
I will be installing a new sear, hammer, and BOLO soon so I will have to disassemble the gun again at some point.
).
Stock 2 - Mixed up new/old hammer spring, not sure which installed.
in Tanfoglio (EAA / IFG)
Posted
I think I got it figured out. Longer spring is the 13lb Wolff hammer spring, I could feel the DA pull more smoothly by way of being lighter, still gritty with the factory parts and could use more polishing. With the original shorter spring, you could really feel the wall towards the back of the DA pull. Mistakes made and lessons learned.