[Beyond short OAL]

ACME 115gr 9mm RN bullets
 
Length .530x .356
 
I ran a plunk test and determined I had to run a max of 1.058 to spin
 
Doing a ladder work up I decided 4.2 grains was ideal for me @ 1115 avg from a Glock 17
 
Firing up the progressive I find 10-20 out of 100 don’t plunk until 1.040
 
Does anyone load THAT short? 1.030-1.040
 
 
 
 
 
Sent from my iPhone using Tapatalk

With ACME 9mm 122 g FP I load to 1.04 in my CZ SP-01. Just make sure you start low and work up to where u are looking to go. Freaked out at first but they shoot good for me once I found the ideal charge weight.

[Solution for Crimping Hardcast Lead TCFP]

Looking to load hard cast 125 grain TCFP for my 357 mag. The bullets I ordered do not have crimp groove. These are sized to .358. These would be for light loads using W231 or N320 powder in my Ruger GP 100 6”. Can I taper crimp these or should I just order the ones with a crimp groove and do a roll crimp?

[Need sights for SP01 tactical]

Also try CZ Custom. I got their adjustable for mine. Its pretty beefy and had a hell of a time getting it installed but rock solid. The Cajun Gun works site was not out yet when I got this.

[Best plated bullet]

RMR plated in 9mm has been extremely accurate out of my CZ-SP01. 

[9mm pistol 50 yard load development]

Thanks everyone. I am going to order some 124 fmj HP's from RMR and get some Time Group and will keep you posted.

[9mm pistol 50 yard load development]

It seems majority likes the 125 HAP bullets. Now about the powder. What end of the spectrum should I be on. Faster powder or slower?

[9mm pistol 50 yard load development]

I have a cz 75-sp01 and looking to develop a long range load 50 yds. This is solely out of curiosity. I have been reloading for 8 months 9mm & 5.56. I have a chrono too. What type of bullet and weight should I start with? From what I gather a lighter weight bullet at a higher velocity would probably be a good start (flatter trajectory). Any suggestions on bullet types, powders, and velocities? I know I can not achieve 2" groups but I do want to know what can be accomplished at this range with this gun.