pikid89

I had planned on doing that, guess it will have to wait until next week

Update 2 I put the factory disco back in and it seems all is well. Any ideas on how to get the Type 2 Disco to work reliably with DA?

Update, it seemed the sear cage is moving a tiny bit as I had also put in a SP-01 Shadow extended safety and I thought that was the culprit, so i put the original safety back in and now its not as bad, but still there. About half the time now the hammer just stays back on a double action pull, and others the hammer falls after a tiny delay. If I hold the hammer back with the trigger, but bump the safety lever, the hammer falls.

Hello guys first post here I recently acquired a new CZ SP-01 Manual Safety I love it but i decided to do some upgrades I ordered up some CGW parts SRS-2 Type 2 Disco I installed all the parts and used the 11.5 hammer spring I reassembled everything and all seems well during dry fire But when I put a magazine in, the double action stops working. The trigger will cock the hammer but it bottoms out before dropping the hammer. Now i can get the hammer to drop if i smash the trigger really hard, but if i pull it any slower, it just holds the hammer to the rear. What say you?