[Bergara B14]

Anyone have a Bergara b14 ridge or hmr? I am wanting to take a long range shooting class or two and also use it as my deer rifle. It would be in 6.5 creedmor.

Thanks

[Ultimate Glock 35 Limited Build]

DK full trigger for sure. Gen 3 stainless guide rod with adapter, sjc magwell, dawson sights and base pads of your choice. KKM barrel if you think you need it, i only got one because i shoot some lead.

[CFE pistol for a 9minor load. I can get for $18 per pound. YES OR]

$11 per thousand?

[How much would you pay for a TTI G35?]

Looking at a TTI gen4 G35. It has the ready to shred package from TTI. It also has 4 mags with TTI extensions in like new condition. How much would you pay for it?

Thanks

[Lightest Fastest Glock Trigger Setups for 3 Gun]

Another +1 for DK. I had a Zev ultimate and the production, the DK much much better.

[How to make Cr speed WSM2 left handed]

I got one if these on a package deal and was thinking of selling it but just read on shooters connection it could be configured to left or right hand shooters. How do i switch it over?

Thanks

[Which powder to replace N320]

I still have some N320 left that I only bring out on special occasions.

I switched all my customer ammo From N320 to:

Explosia D032 ( http://www.explosia.cz/en/streliviny/download/reloading_EN.pdf )

Took some playing around to get it where I wanted for each load, but it is Great stuff and nearly as clean

If you have an FFL its very inexpensive by the 25lb box

How much is it? Couldnt find a price.

Thanks

[accuracy crimp and lead coated bullets]

I use alot of flair for coated bullets. I then pull my barrel or case gauge and gradually decrease flair with the crimping die until it will drop in and out freely. Then pull a bullet to make sure the coating is not cut. On some bullets, i see a faint line where case mouth was, but never more than a faint line or you will have problems.

[The case of sudden stope pipe]

If you just changed springs in Aftec and it works fine with the WAC loads i would think it would be the HS6 ammo that was causing the jams. I can tell a significant difference in ejection patterns with different powders even at same PF.

[Open Glock Questions]

Lone wolf barrel with a Carver 4 port worked great for me. I actually have a couple KKMs and for my open glock build it wasnt worth the extra cost.

[STI 5" 9mm - slide lock problem]

If you dont want to grind on your followers take your slide stop and take the little lip off that catches the mag follower. This deactivates the slide stop so it will not lock back ever.

[Sighting in a 90 degree mount]

I got the other screws in the mount and started being alittle more gental when adjusting the c-more. Man those things are sensitive, they make you so mad you just want to start cranking on it and you over adjust it.

Thanks

[Sighting in a 90 degree mount]

Got it figured out guys.

Thank you!

[Sighting in a 90 degree mount]

I am having trouble sighting the c more in in my new open gun i am still shooting left and it seems like i have ran out of adjustment. Have any of you experienced this? Also, when my gunsmith put the mount on he wanted to use 6-40 screws instead of the 5-40s i had. The screws got mixed up and he put some of the 5-40s in in accedent. There is only 3 out of the 5 screws in it now, the others fell out while trying to sight it in. Could this be making it wander?

Thanks

[MidwayUSA Competition Range Bag vs SOG Black 6 Gear Bag?]

I have the midway competition bags. Its is very comfortable to carry and has alot of storage but i dont think it is ridgid enough on the outside pockets. When you put a couple loaded mags in the mag slots it tends to kind of sink in and take space away from the main compartments. Had it for 2 years and still not even a tear. When i do replace it it will be with one of the medium DAA backpacks.

[Plastic Open guns]

So I too will be trying the Open class. I traded for a M&P Core 4.25 with a STS optic already on the gun. It also has a extra Storm Lake threaded barrel. the trigger is very good Apex trigger with short reset. I realize at 58 years old I will not set the stage on fire but just want to have fun shooting. one of the reasons going to open is my eyes 58 year old eyes. what I would like to know is who builds a Comp for the gun so I man shoot 9major? and what else might I have to do to make the gun reliable. All the rest of the gun is good and I have all the accessories needed, 4 mages with TTI base pads holsters and other needed. for now I will shoot open minor but will want to make a 9 major form this platform.. Bless you and Thanks for any info

Lester

Carver Custom makes a good comp. The 4 port is for major and the 3 port is for both. Also, some 170mm extensions are going to be helpful. The Taylor Freelance extensions are pretty good in my opinion.

[Glock 34: Production]

A 2lb trigger in a striker fire gun is way different than a 2lb single action trigger. Even with a 2lb striker fire trigger there is still a fair amount of travel, its not going to go off unless you mean to pull the trigger.

[Glock 35 KKM barrel and 180 bayou's]

I make 168pf with 4.0 TG using bare lead out of a KKM.

[Which TTI basepad for big stick?]

I have sti 170 tube, grams 13 coil spring and follower, and metal spacer. Which TTI pad do i need? Also, is there any coupon codes for TTI?

Thanks!

[COAL question for 9mm 125gr CN black bullets in a M&P]

With Conical Nose bullets i usually have to throught ream my barrels so that i can load longer.

[sooty ramp]

In my experience there is no fix, just one of tje characteristics of TG.

[What kind of slide lightening?]

Sarge, were is this picture thread?

Thanks

[What kind of slide lightening?]

Just wondering what kind of lightening you guys like to do. I really like the tri topped and pannel cuts but i want something unique. Some picture of your open guns would be great to.

Thanks

[I meased up my SA ambi safety]

You have to push the saftey half way up and wiggle it straight out. Trying to pry it out is definalty good. Sti makes good cheap safteys in my opinion and arent to stiff but they work well.

[Pro Am loads?]

When shooting pro am and steel challenge do you have a specific load for it or do you just shoot your major loads that you shoot in USPSA?

Thanks