m03
-
Posts
19 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by m03
-
-
I've got a spare Henning XL firing pin for a large frame, purchased new about 5 months ago. Dry-fired with it a few times and replaced it with the Gen4/fluted version once those came out. Would like to work out a trade for a stock Limited aluminum basepad, or 45ACP 10-round mag for a Limited, or combination thereof.
-
I believe this would apply here:
-
What part is faulty?
From the PDF, the firing pin is the only part referred to as needing replacement:
Upon receipt, European American Armory Corp. will replace the original firing pin with an upgraded firing
pin for your pistol. -
A direct link helps: http://eaacorp.com/wp-content/uploads/2012/10/Safety-Upgrade-Notice.pdf
Anyway, I believe you'll find that most here are perfectly capable of taking their own firing pin out, noting the orientation, and then putting it back in again. If you just want to send in the FP to get the new one and perform your own installation, maybe just call EAA and see if they're fine with that.
-
Henning is out of medium reach flat triggers, so I picked up a short reach version, and of course it's too short for me. If someone has a medium reach and would prefer a short reach, I'm up for the trade.
-
just a question?How does a person shoot themselves in the leg with a serpa.The one I use and I believe all the ones I seen have the trigger covered.if your pushing the release button your finger is out of the trigger completely even if you have modified the holster in any way(,that would be pretty stupid)I,m interested in where the info on these maroons is located,I'd like to read up on it ps a button retention holster has a button located on the side of the holster that releases the firearm from the holster.Really nice if you have good finger dexterity. just my .02 too
Here ya go... https://www.youtube.com/watch?v=zYvAxLX6OzE
Also this one by Military Arms Channel, which explains some of the issues:
-
i see tangfoglio EAA site has a holster....anyone have one of those? Looks like a bladetech. I know their CS is bad from what Ive heard. Anyone order from there yet?
No help on the holster, but they seem to be slow to ship. I'm on day 5 after paying and my order is still "Processing".
-
I gotta believe that would send a message all the way back to Italy telling them that their high end guns are in demand in the U.S.
Skuttlebutt says they are coming, so we'll just have to wait and see. It would be nice if Tanfoglio offered the kinds of options here that other countries get to enjoy.
That probably has more to do with the main US importer being somewhat ignorant of market demands.
-
It would great the grips are ROCO. Have a couple pair of their 1911 grips.
Are there no markings on the backside?
Just took both sides off and no, there are no markings on the back of the grips.
Last night, I installed a RPT spring and CZ sear spring but the trigger pul did not change at all. The CZ sear spring definitely felt lighter when I moved the sear in the block, though.
Yeah, I tried installing the CGW reduced power TRS and a Henning 19lb plunger spring today, but the combination didn't reduce pull weight at all. The average has gone up by a couple of ounces, actually. There seems to be more front-to-back movement of the plunger with the lighter spring installed...not sure if that's a contributing factor.
-
Swapped the Tanfoglio sear spring for a new CZ75 sear spring, and performed some very minor polishing of the contact points on the sear. Pull is down to 1.511KG (3lbs 5.3oz) averaged over 10 pulls.
-
That's a sexy blaster. Spring weights in KG's and trigger weights in LB's? Thanks for hurting my brain!
Just reporting how they're marked. I used Google to do the conversion and updated the original post accordingly
-
-
-
Just picked this one up from the state mandated 10-day wait yesterday...figured sharing some pics would be helpful. All pics were taken after cleaning off the oil and dry-firing a bit.
The trigger pull over 10 pulls averaged to 1.70KG (3lbs 12.1oz), using a digital Lyman gauge. Approximate pull length measured from the tip of the trigger measured about 5.8mm, with about 4.1mm reset (measured very unprofessionally).
Note the grips and magazine, which are a bit different from the older ones I've seen (cork-pattern grips and black magazine vs. checkered grips and polished magazine).
The included spare recoil spring weights are 5.09KG (11lbs 3.5oz) and 5.59KG (12lbs 5.2oz), respectively.
-
My 3 options are:
1. Find one and get it shipped to my FFL in the next week and a half.
2. Get CA Roster thrown out as unconstitutional.
3. Move.
There are other options, however crappy/complex/remote they may be:
4. Wait for a CA LEO to purchase one and decide that he doesn't like it, then snap it up on resale via PPT.
5. Wait for someone who owns one outside CA to move into CA and volreg it, then snap it up on resale via PPT.
-
Best gun handling I've ever seen in a movie.
On a related note, if you've never seen it, check out Way Of The Gun.
-
Have an up-to-date link available? That one's returning a 404 in a frame on a very shady-looking site.
-
$4,000 for an FS2000 is the craziest thing I've seen so far.
-
Same here, and I'm accessing from a Mac that is known-good since it was reimaged yesterday.
henning flat trigger system, worthy upgrade?
in Tanfoglio (EAA / IFG)
Posted
Late reply, but over the course of several orders, my experience has been between one and five days before getting a shipping notification.