Arlin
-
Posts
57 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Arlin
-
-
Do not crowd the shooter. You do not have to be close during the course of fire but you do need to get the last shot. Watch the timer around the last shot to make sure it is recording.
-
Where does it state, in the rule book, that the start position is slide forward and hammer down?
-
Have you checked to make sure you have the correct stabilizer plate installed? Large part #17295, small #17294. When all else fails try reading the instruction manual RF-100 Primer Filler Instructions .
Arlin
-
Don't forget about Rule 5.4 E. You can be disqualified for discharging your firearm at anything other than a target. Just throwing two shots downrange would follow this as far as I am concerned.
-
Please check all your cases and make sure you do not reload any stepped cases. These cases can and do separate in the chamber.
-
Thanks Team.
-
As the title indicates. I'm looking for contact information for the maker of higher capacity magazines for Caspian wide body.
-
Good write up on this subject in newest USPSA magazine from well known Gun Builder Bob Londrigan .
Visit Brazos@htcomp.net for further information.
Arlin
-
Don't take all that you read here as good information. Read reloading manuals first. Ask questions to clarify what you read then treat every answer with a grain of salt. Too much misinformation that will get you hurt.
With respect
Arlin
-
+1 on the great attitude.
-
In the early days of IPSC/USPSA we would designate brass pickers and tapers. Shooter, on deck, in the hole, brass picker, tapers. Never had a problem. I don't know when this stopped or why. Just my two cents.
Arlin
-
Will-M
I have two pair. One pair has the rectangular swell on the inside. Look to be coco bolo but unsure. The other pair has no swell on the inside. PM me if you are interested.
Arlin
-
Can you anchor it to the back stop with cable or chain?
-
Sig0431:
Did you get the brass you needed? If not let me know and I will send you what you need for the price of the shipping.
Arlin
-
Durango has a USPSA match. Unsure what date but I think it's the fourth Saturday of the month.
-
Do you have the washer installed under the small caliber disc?
-
One of the best welders and person I ever had the pleasure of knowing. I worked around Danny at Zia Company in Los Alamos. Love to all his family and friends.
-
EasyTargetRn
There are a number of ranges in the area. They are as follows:
Albuquerque shooting range. West mesa They will be hosting a major match while you are there 2016 High Desert Classic 10/6-9/2016
Del Norte Shooting Range: Way out of the way and not open to the public Shoots IDPA and other types but no USPSA
Los Lunas Gun Club: About 20 miles south of Albuquerque, club members only but open to outsiders for IDPA matches
Zia Rifle and Pistol club South of air port. Private club but good people (haven' there for a number of years since USPSA moved to Albuq shooting range)
Enjoy your stay and the Balloon Fiesta
Arlin
-
Regarding storage in the garage. I use an old apartment/dorm refrigerator to store my primers. Use original containers for powder on garage shelves.
Arlin
-
A little off subject but we us paper plates to simulate steel plates at our indoor range.
Arlin
-
I have had this issue with military brass but none so far with other brands. I do not use ultrasonic cleaner but do use vibrator with corn cob media and Dillon case prep. Arlin
-
You might want to try this web site.
Cast Boolits.com
Arlin
-
That will get you a procedural. You must retain your mag if there are rounds in the chamber.
Arlin
-
Sounds like an intermittent low powder charge. This has happened to me before. The only other thing that may be happening is your thumb may be riding the slide.
Arlin
Powder left when changing the hopper?
in 9mm/38 Caliber
Posted
I generally cycle the powder drop over the powder container about four times, each time there is powder through the drop.