cecil
-
Posts
1,022 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by cecil
-
-
want to change the recoil spring on my Glock 26... don't like the plastic.... which is better ... flat wire spring or round wire spring on a recoil rod ? TIA
-
I second Primary Machine ... for slide milling ..
-
I plan to get my Glock 26 Gen 3 slide milled for an Optic.. would like to ask what color Cerakote would be the closest to Glock OEM color ?
TIA
-
I clean my PCC after every match... after a thorough cleaning .. i noticed the firing pin would stick in the forward position.. it protruded out of the bolt.. I could manually push it back in... after careful examination i found the firing pin was "peened" a little which caused it to stick out the front of the bolt... (by the way my upper is a complete Taccom upper) ... i changed the firing pin spring which did not correct the problem. so installed a new Taccom firing pin... which solved the problem.. i surmise the old firing pin has about 5 to 6 thousand hits on a primer... just curious --- what kind of service is everyone getting on their firing pins in their PCC's
?
-
I have shot thousands of them in my STI open guns and PCC's as well...... every one of them went ... BANG...
-
1 hour ago, zzt said:
I bought the mid-size Hornady. It was under $100. I'd post a link, but it appears it is no longer made. I use it to clean gun parts, not cases.
BTW, 12 minutes in the cleaner removed every trace of fouling in the firing pin channel. Even though I just bought a spare BCG as a backup, I plan on doing this a couple times a year.
may i ask what cleaner you use in your ultra sonic cleaner ?
-
anyone recommend a sonic cleaner that won't break the bank ?
tia
-
if I polish my mag tubes... i surely would want to drop them on the ground..
-
-
i guess that is why there is LH and RH .. rifles...
-
I use to buy Berry's bullets.... but... won't buy from them ever again.. they have completely ignored sport shooters... so when this run on bullets ends... i hope every sport shooter remembers Berry's Bullets ignored sport shooters and buy from other sources...
-
I noticed some bullet makers have jacked up the prices because of shortages... think they will regret it when this present run plays out..
-
I have at least 20K rounds on a Taccom firing pin in my Taccom ULW 5.25" barreled PCC .. using a Hyper Fire trigger competition trigger ... i do have spares in my range bag..
-
thought i would comment on barrel length... i built a PCC using a Taccom 5.25" ULW upper... upon completion... first time out shooting it at the range .. first 5 shots registered a 4" group at 100yds ... just saying...
-
i use 3.8 Sport Pistol for Everglades 124gr plated bullets.. ...was going to order some more Everglades... but noticed they went up to 11 cents per bullet.. so will shop elsewhere ..
-
On 9/13/2020 at 4:40 PM, warpspeed said:
Shoot til slide lock then take up trap
shoot until slide lock... then go fishing/catching...
-
I run 3 pouches... most times 2 are enough.. EXCEPT... when you drop one and have to waste time stopping and picking it up... if you drop a mag.. you can believe it will fall NOSE DOWN...
-
9 hours ago, JDIllon said:
Any one running the Kynshot 5007? In there PCC and do you know how it compares to the blitz set up. Thanks JD
Blitzkrieg is made by Kynshot ... I run a 5007 in both my PCC's ... runs 100 %
-
I have shot over 8lbs of Sport Pistol power... no issues what so ever.... good power.... reasonably priced..
-
short stroking a PCC will increase recoil... best way to reduce muzzle rise is to tune your ammo to your buffer system... my Taccom ULW 5.25" barreled upper does not have a comp... i can put 2 holes in a target within 1/2" as fast as i can pull the trigger at 20 yards... PF is 126 .. using Sport Pistol powder..
-
check this out...https://dreamplastics.com/product/holosun-510c-scope-cover/ made of neoprene won't scratch your scope.. only $9.95 + $4,00 shipping..
-
prolly doesn't pay to weld it..
-
after ordering a magwell from another vendor which did not fit my PCC ... I went with TECHWELL... top notch .. fits like a glove.. looks professional made..
-
I used 3 Taccom ULW barrels on my PCC builds... 2 of them have the 5.25" barrel & shroud... the other is the 10" super feed barrel with shroud... all are ultra reliable & have ran 100% from day one.. all are extremely accurate &.. very competitively priced ........................................... disclaimer: I do not work for Taccom nor do they compensate me ...
Kynshot buffer comparison.
in Pistol Caliber Carbine
Posted
5007 hyd buffer ... Springco red & white spring... Taccom bcg .. no spacers ... Hyperfire trigger