gusshuman
-
Posts
50 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by gusshuman
-
-
Because I'm too lazy to pick up brass, and too tight to leave it laying.
-
8-3/8" barrel too long for production. Six inches max.
-
Hogue makes a nylon grip also. Cheap, not sticky.
-
Andy was a true gentleman. He will be missed by many.
-
Try this. When you pull the rod out of the primer tube, lift the lever that triggers alarm and return rod to tube. This will provide force to primers still in tube.
Hope this helps.
-
Please correct me if I'm wrong, but doesn't some commercial ammo have crimped primers?
-
Starline.
-
You'll have that.
just my .02
Al
-
Hodgdon site shows 3.5 grains of trail boss producing 658fps with a 230 gr. lrn.
Hope this helps.
Al
-
Try an Ultra-Dot Match Dot. 2, 4, 6, 8 moa dot in one scope.
-
Before you get too upset, repeat the test tomorrow. The results may not be the same.
One group against another doesn't tell you much. Shoot 5 or 10 groups of each.
-
Blade Tech DOH. About as good as anything.
-
-
factory S&W specs are .0006
Shouldn't that be .006"
-
Winchester brass is a tight fit in the Ranch clips. But, no short colt from Win.
Al
-
Good luck! Everybody needs a 617.
Al
-
1050 would be great but the casefeeder is at least much gooder.
Al
-
Zero's shoot very well in my revolvers and a lot of autos too from what I hear.
Al
-
Mine feeds 38s without the washer. Just didn't have one.
It's dropped a bunch of em down the tube.
Al
-
Why do we have to keep a hammer spur that we are not allowed to use?
Al
-
Sat. 16th, rumor has it.
Al
-
We measured them in May. IIRC the iron is 2" and the wood is 1/2".
Maybe Griz will confirm or correct.
Al
-
Just had the action checked and slicked up,
single-action notch removed and put on some
Hogue grips. Do what you need to the sights.
Al
-
Toolman makes a mover front sight.
Al
550 case feeder
in Dillon Precision Reloading Equipment
Posted
like mine