bimmerland
-
Posts
17 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by bimmerland
-
-
CGW has a kit that will bring the trigger pull to 2.5 pounds. I'll go that route since there is no other solution.
-
2 hours ago, 858 said:
What has been changed in the gun? How light is the trigger? Generally the hammer/main spring controls the breaking weight, not the TRS. CZ includes a 20lb hammer spring with the CM, that will add a pound to the pull weight. Your gun should have a 16lb spring in it. This comes up from time to time with all of the Tactical Sport family of guns, frankly it is a training issue. You like what you like, I guess, but the light trigger isn't unsafe.
As I quoted in my original post the trigger pull is around 1 pound. It has been back to CZUSA twice with no improvement in trigger pull. All components are stock and I've put around 600 rounds through the gun.
-
6 hours ago, SouperMan said:
Crud I apologize, I didn’t read properly and you were looking for a Tactical Sport 2 Trigger Return Spring, not a Shadow 2/SP-01 spring.
No problem
-
CZ custom spring not compatible with my TS2. They sent me on for a test and it was the wrong configuration.
-
I have had my TS2 back to CZUSA several times to fix my unsafe trigger pull (less than 1 pound). Is there anyone that makes a heavier TRS. Any help greatly appreciated. Thanks
-
This is the gun I lusted for since it came out. Went from a TS2 to a DWX and never looked back.
-
Do I need the complete kit or just the trigger
-
Which trigger will actually reduce trigger pull weight. I tried an apex flat trigger with no improvement. Anyone have a suggestion. Thanks
-
Appreciate the offer but have decided that 4.2 grains is probably way over the limit so I've decided to dump these rounds and start over.
Send me your barrel with the loaded round you want to run and i will fix that for you for free. -
My kimber ultra can't digest any plated flat points greater than 1.036. If I go past that length the bullet sticks in the barrel. Since I don't have a chrono i'm looking for a safe load to use for such a short bullet. I've been using TG for many years and I like the way it meters in my xl650. Any suggestions greatly appreciated. Thanks
-
Biy the micrometer adapter for you 550 charge bar. You can get down to tenths of a grain. Also lets you record micrometer reading for future loads you call also keep a spread sheet of how each load functions
-
DP tritium of out stock with no projected status. Any other options. Thanks
-
I have a loaded SA 1911 with stock rear adjustable target rear sight and a front solid black sight. I want to replace the front sight with a high visibility front sight. I chose tritium since it looks to be a better choice for indoor range shooting. The front sight measures .130 tall by .125 wide. Where can I get a suitable replacement in Tritium? Thanks
-
Need to improve sight picture but want to stay under $100. Opticsplanet is selling the Mepro sights for $75. Are they a good choice for a beginner? I am just starting to get into target practice. Thanks
-
Went with the Beretta mag plates in rubber. Real PITA to install but enhances grip. Got a pair for $9.00
-
Having intermittent FTE's with 115gr CCI 3509. Decided to replace recoil spring and hammer spring. Went with 12# recoil and 15# hammer. Anything other recommendations? Thanks
-
Got a CZ75B, G19, and a P228. Just starting to learn. Both the CZ and the P228 are my target pistols. Can shoot the daylights out of the P228. But still having sight issues with the CZ.
CZ trigger pull issues
in CZ
Posted
Nice job but that only brings the trigger pull to 1 pound 4 ounces. I was hoping for more that's why I'm probably going with the CGW kit that will bring the pull up to
2.5 pounds.