kalifornia
-
Posts
31 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by kalifornia
-
-
anyone know of a non permanent way of getting a disc to throw alittle less powder? thanks gents
-
Im wanting my first bolt gun, obiviously not a high end target rifle. Would you recommend the savage or another similiarly priced rifle? Im looking at either the .308 or the 30 06 both have a 22" barrel. This is primarily for range fun and I'll be reloading.
-
thanks Terry
-
I pretty much figured that. can I work the bullet out with a couple pair of pliers?
-
Three of my completed bullets don't have fully seated primers, is it safe to fully seat the primers in assembled bullets? and if not what is the best way to remove the bullet without a bullet puller? thanks alot
-
thanks gentlemen
-
yeah thats what i meant, how is a good way to empty the primer trough? I tried a paper clip, but they seem to want to just collect up at the top
-
Hi guys don't know if its cool to tag on a question in this thread so let me know. Today I started my first ever reloads with a 1000 in 9mm. My question is: is it normal to see a slight flare on the case where the base of the bullet gets seated? And is there a trick to depriming a cocked primer without removing the shell kick out pin? thanks
-
if it were mine i'de just remove alittle material from the stock follower
-
^ that gun was right out of the box though. I haven't read any reports of the gun choking once cleaned and broken in.
-
10 shots at buds $562
-
I don't know what the shell follower looks like on the inside , but you could be losing some space due to its design
-
Im usually good for a dumb idea, can you unthread the cap about half way and locktite it? that and a spring trim might do it
-
2 feet is redunkulously long
-
gunbroker #279649818 has a ten shot for a buy now price of 585 plus $33 shipping
-
buds have them in now
-
has anyone removed the carrier dog spring to see how freely the carrier is moving on its pivot? could be rough machining
-
Did it come with cast on/off shims or height adjustment shims for the stock?
-
why the Smith & Wesson shirt???
-
will it be shipped with multiple chokes or what choke will it come with, and what is the silver button behind the trigger? and no chromed mag tube?
-
very classy jrmock, what you'de pay for the barrel chop? did you shoot it enough before to offer a comparison?
-
One other question please- does the sling attachment on the spx forearm denote a 3rd generation gun with the latest gas ring system? thanks guys!!
-
absolutely Mont, thats a no go. and thanks nuke and donoharm
-
question, is trying to bust a hand thrown clay with ghost ring sights; impossible, next to impossible, difficult or doable? also is the entire front ghost ring post metal? thanks!! Im still trying to decide which model to buy
your opinion of savage edge/axis
in Precision Rifle
Posted
thanks divenshort, keep the opinions coming, if you think it is a p.o.s. tell me why. this would be my first bolt gun. Im not looking to kill a Elk at 1000 yards.