limited shtr
-
Posts
75 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by limited shtr
-
-
Thank you for the weight info. How does the gun balance Iam assuming it’s nose heavy ? Please describe as Iam thinking this is my next open gun .
-
How much does the Akai open gun weigh with tungsten sleeve barrel ?
-
How well does the atlas chaos balance with the steel grip ? Is it neutral , hand heavy or nose heavy ? Thanks for any details
-
With a custom gun you get to pick any option you can afford. I would go custom over any mass produced open gun. The difference is the gun is set up to a load, spring and weight they feel works their gun the best. I did the sti route and they don’t even come close to a full custom gun. If you want a set up to fit you out of the box ready to shoot by custom !
-
1/8 inch holes & 3/16 holes
8gr autocomp 115 Montana gold
-
I can tell you holes work better than just a comp I have 5 -9major barrels all the same brand and all the same comp for the same open gun. No holes , 3 holes , 5 holes , 7 holes and three slots like magna porting ! The 7 hole barrel is super flat and loud and hits a little harder in the hand but no waiting on the dot to return from the top of the scope . But it's all a system that works for me and keeps the R.O. from crowding me. Also I own 14 different compensators that are being produced currently and I found what the right comp for my system.
-
3n38 11gr Montana gold 115gr with seven barrel holes really loud but the dot doesn't move at all and easy to shoot !
-
Iam looking for supercomp data loaded with autocomp and 115 gr Montana golds ?? Starting load "OAL" and how many grains ?? Thanks for any info
-
How long are you loading your ammo
-
A zone compensator !!
-
Shot all comps on the same gun using the same load at 15-18 yards then shot a two target bill drill. I did this with every comp bedell, three different akai comps , Mclearn, old and new cheely , three brazos comps and many others. Some worked ok on different open guns but through lots of testing the lone star was the most constant dot tracking !
-
I own over twenty comps the best I've tested was the lone star innovations titanium comp. I shoot 124 gr In my 38 super comp with 4 barrel holes ! My dad shoots same comp in 9 major with bad arthritis and this helped him to continue to shoot major .
-
Are you using spacers in the mags?
load longer this helped all of my feeding issues !
-
Max mags, extreme engineering hammer,sear, disco . Don't use sti not as good of quality or quality control.
-
Buy a Para the best double stack metal gun for the money! I have a p-16 shooting major 175 pf and it's ten years old. I shoot it every other weekend at matches or practice !
-
What grip is this ?
-
Any slide will crack if cut wrong or not treated correctly for the manufacturer. I have all caspian slides on three open guns with 15 to 20 thousand on each and no cracks or problems . Everything I've seen lately has been STI slides. Can't go wrong with CK parts either
-
The LSI comp is one of the best I've ever used ! Try a ti comp they are light
-
I have several steel challenge guns as well as revolvers with lots of porting. They are easy to shoot but not as flat as my open at 178 pf. Do it I love mine have done it for lots of gun club members etc.
-
All the Akai comps work good but the like lots of barrel holes. The cheely comp works to but I found three barrel holes and a 174 or above power factor helps this comp
-
What barrel twist rate for 115gr lead .358 dia bullet for my smith and Wesson 627. Iam using long colt brass and 4.6-4.8 of wst . Iam using a Douglas barrel now but have no idea what the twist rate is. Any help is appreciated
-
I find with hs6 the less grains I use the dirtier it is a do didn't get real clean until I got over 8 grains 9major. I would pick a different powder for minor autocomplete works good for my minor load
-
What comp is that in the picture
-
PT safeties they are the best i have used ! Or lone star innovations makes awesome safeties these are awesome as well
Middy length open recoil spring set up question
in Open Pistols
Posted
I have a middy length open gun . Does it matter if I run a commander
length or govt length recoil spring set up . I want to use a commander length set up so i don’t have to machine different comps to accept the govt length reverse plug. I don’t see any problem with the commander length since it is only .4 shorter . It was originally designed to run govt and I have converted to commander with only 2 coils cut off a standard Wolff spring . Please advise or comment if I have done this right or wrong?
Thank you