IPSC_RUS
-
Posts
25 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by IPSC_RUS
-
-
Hi there, lost my wrench, trying to find a proper hex or torx wrench for my Glock Heinie rear.
What size is it?
Tried Torx T6 today - it's a bit loose.
Regards
Kirill
-
It looks like one that Derek from Accuracy Speaks in Mesa AZ made a while back.
nope, nothing similiar to me.
Guess I'll have to find 3D scaner and 3 axis machining center - it'll be a lot easier =)
-
May be an older PRI. Looks pretty similar. Newer ones have ports on top as well.
please take a closer look at the ports
-
... I have a Miculek in use, this one is designed more carefully, with math and engineering in mind. ...
The Miculek was designed with neither math nor engineering in mind? How do you figure that? (I'm not a mathematician, engineer, or machinist, so maybe it's not obvious to me.)
I'am not saying anything bad about mikulek. It's "best for thr buck" product on the market.
But I've tested various JP,SJC,Arredondo,Mikulek etc.
The one on photos is holding a first place, eliminating recoil and what's most important - eliminaiting barrel movement. imho
That's why I'am trying to understand who made it.
The trouble is - most of my shooting goes with Barnaul ammo. Cheap ammo,hornady bullet. PF is a bit low, so muzzlebrake design does play a role.
-
Nope
I have a Miculek in use, this one is designed more carefully, with math and engineering in mind.
Inside diameter of the gas chamber with the side ports is smaller than Miculek.
Side ports are different. I'll try to get additional pics on weekend.
-
Hello, couple years ago friend of mine purchased Bushmaster AR-15 with 20 inch barrel and highly effective muzzlebrake.
Made of ss with pretty ordinary design, but rifle control is nearly perfect. At least more effective, than with Mikulek or SJC.
Any thoughts, who is the manufacturer?
pics:
-
go to dawson precision page
it has all the info you need
-
Despite my area of living (we are not allowed to have pistols or revolvers,only store it in Shooting club), I do work with Glock pistols for about 4 years.
Those slides would score 3 points out of 5, meaning stock ones are 5 out of 5.
Cheap paint, soft metal, Dawson and Heinie rear sight posts are sliding right and left if not glued.
Main question is - maybe problem lays in cheap ammo?
I saw Sigs with broken extractors on 6K-10K mileage. My mate's CZ SP-01 Shadow slide got cracked on 20K, another one lived for a 25K.
All pistols are running on Barnaul ammo exclusively, sometimes getting Wolf's.
Does anybody have any theories on the topic?
-
gun number 2
note small cracks on 11,1 and 5 o'clock
-
Hello, we have 3 G17s with a CCF slides and IGB match barrels in our shooting club.
One gun with less than a 6000 rounds mileage had a slide failure.
Another one with 4500-5000 have small cracks around striker hole. Guess it won't live as long as 300-500 rounds.
Third one has 3000 rounds mileage and seems ok. Guess we will see somth intresting for the next 3000 rounds.
The slide itself is very soft - deforms quickly in slide stop area.
Question is: did anybody see anything like it? May be it's somehow related with use of Barnaul ammo?
-
Have this hope it helps
I think it was at 1x and it's all I have.
thanx
it's more than adequate quality.
I see a small piece of C-more red dot on 1o'clock position?
You just used to shoot that way or Z6i don't give you red-dot speed at 1x power?
-
Hello, about 6 month ago I purched Z6i with BRT-i reticle.
Can't say I'am quite happy with it. Thick lines are blocking too much. And reticle becomes too "busy".
Swarovski european office says there will be special reticle for ipsc matches, but no word on how soon.
So - if somebody have same Swar Z6 with LD-i reticle in use, can you post pics of it on 1x and 6x?
regards
Kirill
-
shoot ONLY Tula
have about 14-15K with it
goes bang every time I press the trigger
-
Trying to find thread adapter for AK-74 with 24x1.5 thread.
Want to convert to standard 1/2x28
-
one of the owners moved to US
he is a member here, on this forum
Regarding his rifles - usually it's not milspec, but very precise and accurate.
-
Got it for about a month.
Extremely well made and very clear piece of glass.
Trying to find extended adjusting lever, like the one shown on photo below.
Still - can't find it anywhere.
www.apcustomusa.com
He is the one who makes them for Swarovski.....
but don't sell them
---
Mr. *******, I appreciate your interest in our company and products, however, I regret to inform you that we no longer sell a T.E.A.M. lever for the Z6/z6i line of scopes.
-
Got it for about a month.
Extremely well made and very clear piece of glass.
Trying to find extended adjusting lever, like the one shown on photo below.
Still - can't find it anywhere.
That looks like a home made one. You can buy one for the Meopta and with very slight modification it will fit the Z6i 1-6 scopes. I have shot the circle dot version with an R&R throw lever for the past 2 years and my BRT version is in the mail. Can't wait to try it out.
Doug
thanx - I'am waiting for eurooptics to get some in stock.
Promised 10-15 days.
-
fluting is possible, but everything is expensive in this part of the world.
Price for this contour is 500 bucks and about 700 bucks for a finished barrel.
-
Thinking about Lothar Walther 16.75 M4A1 countoured blank
it will come without extension and gas port
Is it possible to make it mid length? or it's easier to play with gas port size?
Pic of the contour attached
-
My opinion: I've been shooting with a lightened carrier, empty buffer, adjustable gas system and pmags with nordic +18 extensios for 5k rounds - with two malfunctions, both of them bad primers. The ammo I've been shooting has been either polymer coated or lacquered russian steel cased Barnaul ( I think its not available in USA). If you clean your rifle every 200 rounds or so, or atleast add some oil, a lightened system will work.
small OFF
I heard Hornady started to produce 5.45x39 and 7.62x39 with russian brass and their hunting bullets.
Is it already available in Finland?
-
itresting coating
kinda slippery feeling
toolmarks inside, like it was done at some old warsaw pact factory
shoots fine, but I just can't shoot it without lubrication, not my way =)
burned about 3000 rounds with it of Barnaul ammo
everything ok
-
Got it for about a month.
Extremely well made and very clear piece of glass.
Trying to find extended adjusting lever, like the one shown on photo below.
Still - can't find it anywhere.
-
Hannu, what CF FF Tube is that?
Other thing is, why would you want US rifle when you can get a better one made in Finland
'cause you mooved to the US =)
And there are some changes in gun business in Finland as I hear.
-
Got mine almost a month ago.
Fantastic piece of glass. You can try and compare it with zeiss 1-4 \ red dot reticle or with SB Short Dot that was blessed by Larry Vickers.
But Swarovski is the only one with 1-6 ratio and price tag is smaller than other two.
I got mine for 2K - not a bad deal for my areal of living.
Fast burning vs slower burning powder?
in 10mm/40 Caliber
Posted
Anybody got some experience with VV 330?
Want to try it with plated 200 grainers in 40SW
On 4.6 gr of VV340 everything cycles and shoots good, want to try a bit faster powder.