[Red dot slide milling specifically for 1911/2011]

$475 total, which included the slide cut, optic plate with screws, cowitness sights front/back, DLC slide refinish and return shipping.  The dimensions, fit and finish were perfect.

[Red dot slide milling specifically for 1911/2011]

I just had Vulcan Machine Werks mill an STI Maurader slide for their optics plate and refinish in DLC. I’m extremely pleased with the results and will have them do another for me soon. Email them first to ensure you get exactly what you want - they are very good with communication.  
 

https://vulcanmachinewerks.com/
 

[What has SIG done to accuracy?]

BarSto barrel will definitely solve any accuracy issues with a stock slide (provided it is fit correctly).  

For X-5/Legion slides, KKM is another option that definitely works well.

[Dillon No BS Warranty?]

As the OP said it’s been well used, I’d send it back. It will be disassembled to the frame, tossed in the solvent tank and completely rebuilt. You will get the press back in brand new condition. From that point, anything that breaks from normal use will be replaced via warranty.  
 

I can understand Dillon’s perspective in this situation. They have no idea what’s going on with the press and would be relying on the end user (who is admittedly new to reloading) to properly diagnose and correct issues. This can very easily turn into a cascading parts problem, which they have very likely been through this many times in the past. The service fee is very reasonable considering what you’ll receive in return. I wouldn’t try to take undue advantage of a generous warrantee policy.  I’d let them restore it and from that point they will supply their complete warrantee service for the rest of the time you own the press.

[45 ACP sizer die not working]

Might also check to ensure the Case Insert Slide Spring (Dillon part #13937) isn’t broken. 

[Mr Bulletfeeder Dislodge Arm Spring]

Here are the instructions they gave me:

 

“Yes, we have MBF dislodge arm springs. They are $2 each, plus $4 for shipping, bringing your total to $6. Follow the directions below to order.

Please go to our website and log in. Enter the #100287 in the search bar for Special Payment then increase the quantity to 6.  Make sure you mention in the Comments during the check-out process that you are paying for a MBF dislodge arm spring.”

 

Here’s the DAA/CED point of contact:

Josh Lentz
Sales & Technical Support
Alpha Dynamics USA
2908 Betz Court
Orefield, PA 18069
Tel: (610) 366-9752
www.doublealpha.biz <http://www.doublealpha.biz>

 

 

[X5 Recoil Springs]

If you're looking for the factory springs, here you go (though you'll pay a premium ordering direct from Sig):

 

12 lb:  https://www.sigsauer.com/recoil-spring-12-p320-x5-legion.html

14 lb: https://www.sigsauer.com/recoil-spring-14-p320-x5-legion.html

 

1911 springs work as well.

[X5 is back]

1 hour ago, Johnny_Chimpo said:

And yet that's the focus here

Even if that were true (there’s plenty of non-USPSA content on these forums), it does not constitute a marketing failure for the manufacturer. All I am saying is that there are other markets for a gun like this.

[X5 is back]

Not everything is about USPSA. There are other shooting sports out there, and far more regular shooters than competitors. I shot the German made X-Six at the Bianchi Cup, and the X-Five Tactical in several classes before transitioning to the P320 for work. For me, the P226 X-Series had the best ergonomics and recoil characteristics of any handgun I’ve ever used. Many would value that over the rules of a sport they will never participate in. However, we’ll see if the spare parts and aftermarket situation will improve now that the guns are being made in the US.

[Mr Bulletfeeder Dislodge Arm Spring]

Rick got back to me, as did Alpha Dynamics shortly thereafter.  I was able to specialty order them from Alpha Dynamics.  Thanks to all for the help!

[Mr Bulletfeeder Dislodge Arm Spring]

Thanks, Chuck.  I'll keep that in mind if I can't find the spring.

[Mr Bulletfeeder Dislodge Arm Spring]

Ah, thanks.  I went direct to CED.  I'll try him.

[Mr Bulletfeeder Dislodge Arm Spring]

Thanks!  Contact info is for DAA.  I sent an email to CED a few days ago - nothing received so I posted here.  I'll continue following up with CED/DAA.

[Mr Bulletfeeder Dislodge Arm Spring]

Hi guys -

 

The Dislodge Arm Spring on my Mr Bulletfeeder has worn out and does not have enough strength to move the Dislodge Arm, much less kick out loose bullets from the collator plate.  I haven't been able to find a source for the spring - does anyone know where I can get it before I try to find a similar torsion spring from McMaster-Carr?

 

Thanks!

 

[Gun getting to hot !]

I use a portable air pump - cools the gun down to ambient while I’m reloading mags, even on the hottest days. 

[ALPHA-X Holster for JEM Square Trigger Guard]

Hey guys -

 

Does anyone know if there is a DAA Alpha-X holster insert that will fit the JEM Guns 1911 square trigger guard (perhaps the Caspian Square Trigger Guard insert)?  I'm considering my options for a 1911 build and I'd prefer the stability of the square trigger guard in that holster as the 1911 round trigger guard tends to wobble a bit without the muzzle support attachment.

 

 

Thanks!

[What's your cost per round in this post-pandemic pricing world?]

Current costs for me (per round), factoring in shipping, HazMat, etc:

 

Powder: 3 c (N320)

Primer: 13 c (CCI or Fed)

Bullet: 12 c (JHP)

Brass: 2 c (assumes 10 loadings before lost)

Total: 30 cents per round.

 

So, a single 6 shot Bill Drill or NRA AP string is $1.80.  A typical 300 round practice is $90 in ammo alone (and does not include the time assembling it and other range consumables).  It's definitely a new world...

[Is a PCC REALLY worth having]

Shooting steel at close range is problematic with rifle calibers. Most ranges will not allow steel to be shot with anything other than pistol calibers. There is value in a PCC in this situation.  I’m also with Dirty_J, the fun factor should also be a consideration, particularly for introducing new shooters to our world who may be sensitive to muzzle blast. 

[Kkm or barsto]

2 hours ago, HOGRIDER said:

@VizornIf you do try the KKM and are looking for max 50 yd performance, the AMU uses the 1:18 KKM barrel with Hornady 115g XTPs.  ~.75" out of a test fixture at 50 yds.....

 

Thanks! 

[Kkm or barsto]

Hornady 125 gr HAP, VV N320, Starline brass, Fed GMM SPP, 1.090”. Chrono’d 1067 out of the 5” Bar-Sto. 

 

Also tried Blue bullets 125 TC, but they didn’t group well at all past 25 yds. I had an older batch of Bayou 125 TC (no longer made) that grouped very well at 25, but did not nearly match the HAPs at 50. 

I need all the accuracy I can get at 50 yds since I shoot NRA Action Pistol, so the HAPs are what I settled on. 

[Kkm or barsto]

I have a Legion with a Robert Burke fit Bar-Sto and an AXG Pro with a Bar-Sto drop-in from Springfield Precision (they machine it to a “generic slide”). Both shoot inside 3” at 50 yards. I plan on trying the KKM at some point, but the Bar-Sto’s are doing the job for me so far. 

[upgrade on x5 legion P320 trigger for production division]

You could try adding an ISMI +10% trigger return spring to bring the overall trigger weight back up. 
https://shop.springerprecision.com/ismi-p320-trigger-return-spring/

 

[any AR experts?]

Check to ensure the firing pin flange is inside of the retaining pin (the cotter pin).  It's easy to get the retaining pin on the wrong side if the firing pin isn't completely inserted before installing the retaining pin.

[adding thumb safety to X5 Legion]

I edited my post above - sorry if I caused confusion.

[adding thumb safety to X5 Legion]

edited - I spoke too soon.  The thumb safety on an M17/M18 can be removed and replaced with a takedown safety lever pin.  However, the reverse is not true for FCUs that were manufactured without the cutout on the right side.