Roadkill751
-
Posts
74 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Roadkill751
-
-
I received two emails from practiscore, second one says they look forward to seeing me in December. I hope that means I am in.
Hurley
Ditto for me. I hope that I am in too, since they already charged the cc..
-
Change out the recoil spring to a 13lb. One, after you check the crono FPS!
This......
Since it is a light load, need a lighter spring than the factory weight spring to move the slide faster
so it will eject and feed another round.
For non USPSA matches I am using 135gr Bayou Bullet with 3.7 solo and it still functions, won't make PF
for USPSA.
-
Did you check to see if the slide is cracked on the right side above the serial number. You mentioned it
shoots fine when cold, when it heats up is when the problem starts. A crack slide could do this.
To check it field strip the slide, and hold it with the serial number facing you and see if it bends.
Like breaking a stick.
Other than that, send it back to the factory explaining the problem. Hopefully, the Factory Armorers can
duplicate the issue and fix it.
Good luck
-
Read the suggestion on here to fax in an order to MG. Faxed in my "wish list" on 3/14 for 124gr JHP's. My CC was charged yesterday, and I got a shipping notice yesterday that they were on the way!!!
Sure glad I saw that recommendation on here.
Where do you get the order form from? Their "website" for orders or even trying to get to their forms is "down for maintenance"
Thanks in Advance
-
Thank you Chris for taking over. I know you will carry on the legacy that Ron has done. Good luck!
-
RIP Chief Kyle.
While I didn't personally know you, but I read your book is how i got to know you. You were a true family man, warrior, hero, and one who was taking care of the troops affected by the wars. There will be no others like you. I know you and Ryan Job are linked up again, and catching up on old times.
When I heard about his death, I was deeply sadden. I am still shocked and in denial.
My thoughts and prayers go out to him and his family. I also will pray for Chad and his family too.
Godspeed my friends.
-
I know this is off your topic.
But where were you today? Was it too cold for you? We had a great match. Merry Christmas.
-
Give him chocolate chip cookies, instead of chocolate chips substitute Ex-lax. He will be in the crapper instead of running his mouth on the range.
Problem solved....
-
The one I sent in in March took about 6 weeks. With it being "prime time" for GSSF matches (I bet they are still processing awards from the Gunny shoot) it may take a couple extra weeks. It depends a great deal on what you ordered and current stock. I got a Gen 4 23, which is pretty common. Friend's daughter won a cert in July and sent it in in early August for a G17C and I think she is still waiting.
Hey Atlgentlegiant,
I got the call from my FFL Dealer that the gun arrived yesterday. So from dropping the cert in the mail in July to Sept for a 17C is not a long turn around time. I was figuring at least until Nov.
Be Safe
-
As for stage #4, if you shot Cherokee's monthly match, you would be well versed in long distance and strange standard type stages. We have averaged 90 shooters a match so far this year, 2nd Saturday of every month.
It is still a PITA no matter many times you shoot it, practice shooting it, or throwing rocks at it.
Thanks for a great match and thanks for being there for us RO's. I really enjoy helping out. Count me in for next year. (That is if you decide to keep it another year.)
-
The swinger turned into a PITA, poor KC had to run it several times before it worked.
the guy is like 20 lbs wet. i told him he needed to eat a burger before trying to set the pressure pad again.
You should have give him some of your PB&J sammages before he stepped foot on Stage 9. I was busy and I forgot to bum a sammage from you.
-
I bet one day we will see PITA as a classifier.
I hope the hell not.I had a blast shooting on Friday, our Squad 3 was great and the Jungle Run was fun too bad it was tossed. That was the stage that I was suppose to work on Saturday, but with standing water no one would have found their mag if they dropped in the muddy water.
We were switched to stage 9 and at first it was just wet. After the first few shooters it turned to mud, after a little gravel we were able to get back to work.
The swinger turned into a PITA, poor KC had to run it several times before it worked.
Thanks for all of the shooters who came. And thanks for the great sportsmanship by all.
Congrats to all of the winners!
-
I shoot tomorrow, then RO on Saturday. It is going to be a great match.
-
All classic targets, not sure how I feel about that. Other than that I like it
That is what I believe that is what Glock wanted, since they are an international company.
-
Yes we shot the commercial at south river. Good eye sir.
I even saw one of my shooting buddies in the red, white, and blue shooting shirt (River Bend Practical Shooters).
By the way, great video on a great guy!!!!
-
Update, The Orange County Sheriff's Office has recovered my gun and tools. Same lowlife had them after two months. I just received my recovered tools and the evidence items that were taken by the Deputy. The gun will come later, at least it is off of the street. I never would have believed that I would see any of my stuff again.
Hurley
Good job OCSO........
At least you got or will get your property back. Usually you don't hear things like this.
-
Very cool, it would be nice to see it on TV. Who's the shooter?
East Alabama Gun Club Member, U.S. Army Ranger Matt Martini. A year ago, he had not really shot USPSA. Now he is a hair from making Master in Production. Great Guy, Great Patriot. Even if he does shoot a Glock
Mark K
Looks like it was filmed at South River Gun Club (Conyers GA)....
-
How bout, Grand Master tips on classifiers and tips on certain classifiers.
This will help us to raise our classifier levels......
-
I just had the shots into the left elbow. That usually calms it down, until I lift something heavy like steel poppers at the range. If it keeps up, going for the surgery, well maybe not since I read post #30 of the other thread.....
-
Did you check the oil and see if it looked milky? That would be evidence of antifreeze in the the oil, hence a blown head gasket. Check the antifreeze to see if it has oil in it for the same reason.
YMMV
-
HRider,
If you have the Deputy's name and badge number, send a letter to his Precinct Commander. This will mean more to the Deputy. And with some agencies this letter will go into his personnel file. When promotions come up and they check his file the atta-boy letters will help him on the promotion process.
Thanks!
-
Stihl is well worth every penny.
+ 1 for Stihl. My dad has a FS 65 which is a straight shaft trimmer. He bought it in 1989, the thing still runs like a beast. All he has ever done to it is change the spark plug and air filter every other year and grease the gears at the end of the shaft every year.
I have a FS 120 which is a commercial brush cutter, I bought it seven year ago and it still runs strong.
You will never go wrong with a Stihl, unless you run straight gas in a two-cycle machine.
-
On Tuesday, I placed a call to Bayou Bullets and spoke with Donnie. I needed some 135gr 9mm. He had a thousand on the shelf. I told him that I would take them. Well the Postman just delivered them. I know that Bayou Bullets has stuff on backorder, but Donnie came through for me again. I highly recommend his company to everyone. Thanks Donnie!!!!
-
LOL!
"Dylan Fletcher has started shooting locally in USPSA, IPSC, and IDPA."
Dylan did show up at one of our local matches to watch us shoot. I never seen him shoot any other local matches.
I hope the hell not.
Official 2015 Fort Benning Multi-Gun Thread
in Multi-Gun, Rifle & Shotgun Match Announcements
Posted
The rest of the stages are posted as of now.