[Adjustable rear sight for P226?]

I have a #8 dawson front and factory #8 rear and my Sig is shooting 3-4" low at 20 yards. Does anyone know of an adjustable rear?

This is the link you want to read ... may explain how/why you do not need an adjustable rear sight, instead, you have to learn how to use the Sights you already have; at least that was my case. I thought the sights were no good but the problem was that I did not understand their design.

Ken

http://www.handgunforum.net/sig-gunsmithing/24919-sig-shoots-high-have-questions.html

[Adjustable rear sight for P226?]

I have a #8 dawson front and factory #8 rear and my Sig is shooting 3-4" low at 20 yards. Does anyone know of an adjustable rear?

I suggest you read this before you do anything else, and definitely look at the Diagrams that Growler provides links to .... may just answer your question and solve your problem (I had exactly the same problem). He provides and excellent and clear cut description of how SIG's are designed to aim and what sight picture you need if you stay with Sig Sights.

Ken

http://www.handgunforum.net/sig-sauer/25072-p226r-elite-sights-shoot-too-low.html

[Sig P226 R Elite Sights ... shoots too low]

Bummer .... TFO Front Sight arrived, package marked that it was a size 8 but when we put Calipers on it, turned out to be considerably taller than my current size 6, which, was the exact opposite of what we are trying to accomplish.

Think I will have to call Sig and see if they can sell me the right size, or, give up on TFO's and just get a set of Sig sights that will work for me.

Will also try shooting it some more with current factory sights (8 in Rear and 6 in Front as I noticed that all the new Sigs in Dealers case come that way from the factory.

Ken

Called SIG Customer Service and Ordered a TFO Front Sight in Size 8; hopefully, that will provide the needed Elevation Gain.

[difference between #6 and #8 front sight]

Information from Sig (and aftermarket sight manufacturers) regarding night sights:

9MM OR 357SIG - #8 FRONT/#8 REAR

40S&W OR 45ACP - #6 FRONT/#8 REAR

For me, my old eyes, and my P226 40 cal, the standard factory stock 6 front, 8 rear, makes me shoot about 2-3 inches too low using a "Center Hold" sight picture.

I'm calling SIG today to order an 8 front, hoping that 8 and 8 will work better for me and the "Center Hold" sight picture that I prefer.

I'm sure it is an individual preference thing ... what works for me may not be best for you.

Ken

Ordered the TFO Front Sight in Size 8

[Heine 50+ Sights Set for SIG P226]

Anyone using the Heine "50+" Sights .... ?

My eyesight (and age) sure qualify for them. The Wider notch in the Rear "Slant" sight makes sense to me in facilitating quick front sight, which is Fiber Optic.

My current SIG factory Night Sights are Front size 6 and Rear size 8 and it causes me to shoot about 2-3 inches low at 10-15 yards. I know I could just contact SIG and buy a new front or rear sight to hopefully make the adjustment. But, the Heine web site has diagram illustrating how their design is based on a sight picture very much like a 6 O'Clock hold, or, a POA=POI which is exactly what I like.

Will appreciate learning of your experience with these sights

[Dawson Fiber optic front sight]

I have a SIG P-226 9mm with a Heinie Rear sight. Which Dawson Fiber optic front sight should I use? The height of the Heinie sight is .210. Thank you in advance.

Kevin

What did you end up doing and how did it all work out? I have a P226 Elite in 40 cal and am considering the same thing as my size 6 front sight makes me shoot too low.

Ken

[Sig P226 R Elite Sights ... shoots too low]

Bummer .... TFO Front Sight arrived, package marked that it was a size 8 but when we put Calipers on it, turned out to be considerably taller than my current size 6, which, was the exact opposite of what we are trying to accomplish.

Think I will have to call Sig and see if they can sell me the right size, or, give up on TFO's and just get a set of Sig sights that will work for me.

Will also try shooting it some more with current factory sights (8 in Rear and 6 in Front as I noticed that all the new Sigs in Dealers case come that way from the factory.

Ken

[226 holster]

I run a Blade Tech Sting Ray belt holster with the DOH attachment.

What is the "DOH Attachment" ?

It Drops and Offsets the holster down and slightly away from the body for quicker draws, while still being legal for Production.

Thanks for the explanation.

Ken

[226 holster]

I run a Blade Tech Sting Ray belt holster with the DOH attachment.

What is the "DOH Attachment" ?

[Sig P226 R Elite Sights ... shoots too low]

Rear Sight Heights:

#4 = 5.24mm (0.21 inches)

#5 = 5.52mm (0.22 inches)

#6 = 5.80mm (0.23 inches)

#7 = 6.07mm (0.24 inches)

#8 = 6.35mm (0.25 inches)

#9 = 6.62mm (0.26 inches)

#10 = 6.90mm (0.27 inches)

Front Sight Heights:

#5 = 6.01mm (0.235 inches)

#6 = 5.88mm (0.230 inches)

#7 = 5.74mm (0.225 inches)

#8 = 5.60mm (0.220 inches)

#9 = 5.46mm (0.215 inches)

#10 = 5.32mm (0.210 inches)

Front sight 1" POI change between number..... Rear sight, 2" POI change between number

changes at 25 yards changes at 25 yards

Sig recommends the rear be changed first.

My Gunsmith is trying to get a Size 9, or size 10 TFO Front Sight for me (to replace my stock, factory, size 6 Sig Night-Sight ... I'd rather shoot a little too high than too low. It's easier for me to move to a 6 O'Clock Hold to resolve impact being too high from a POA=POI Sight Picture.

[Sig P226 R Elite Sights ... shoots too low]

I have a new (to me) Sig P226 Elite 40 Cal that I've put about 200-250 rounds through ... about the same number the original owner put through it.

I really like the pistol but find that at 10 Yards it shoots about 3-4 inches lower than what I think my sight picture will produce.

It has the original Sig Night Sights that are standard on the P226 R Elite. I think the Rear Sight is marked as as size 8 and the front sight as a size 6.

Looking for suggestions on how best to improve my shooting results .... ideally, I like to shoot with either a 6 O'Clock hold, or, a POA=POI where the top of the front sight is aligned with the center of the target. I don't like to have to entirely hide, or cover, the target with my sights at the time I break the shot.

Thinking about 3 options"

1.) call Sig and buy a different size Rear Sight ... Owners Manual says this is the most effective way to change Elevation

2.) Install a TFO Front Sight .... if my Gunsmith can confirm the size would yield desired results with current Rear Sight

3.) Replace with Mepro's; maybe a set with Adjustable Rear Sight as I will likely buy a 357 Barrel also .... and I have these sights on a Glock G17 and like them

Got any suggestions ?

Thanks

ken

[finally got my glock 34 today!]

sorry i know this has been asked alot but is there a preformed grip tape for the g34? not the rubber ones i dont like those.

Yes, Talon makes a set for the G34 .... I put them on my own G34 that I use in IDPA and they fit perfectly; could not be happier with them.

Nice people to deal with and very quick delivery.

Ken

[Dawson Front Sight .285 vs" .300 ?]

Thanks Guys, one and all .... I am going with your advise; ".300" it is then.

Thanks again,

Ken

[Dawson Front Sight .285 vs" .300 ?]

Why does one choose one height over another for the Front Sight? Why .285 vs: .300?

I'm ordering some Dawson Sights and their web site says ... for the Rear Sight, it "requires a Front Sight height of either .285 or .300"

I don't know what difference it makes to me whether I Order one vs: the other? Does one height or the other have advantages or disadvantages?

Going on a G34

Hoping you guys can once again educate me.

Thanks

Ken

[Dawson Adjustable sights]

I have the adjustable plain black rear and the .100" wide fiber optic front with the green insert on my G35. I LOVE these sights.

This is the exact same configuration I use. Best...sights...ever.

I debated that same option but decided to try the red FO inserts on the Rear to make the Green Front really pop. Plan is; if I don't like the red rear I can always put something black on the FO Rods; either a temporary black tape or a more permanent paint or black marker to block the light from entering the FO Rod and then they'd look black just like they do in low light on the Indoor Range.

[Dawson Adjustable sights]

I just got them on and installed them. They are a big upgrade over the tru glo sights I had. Throw the gun up and you can't help but see these. I would have tried them years ago, if I had known they were this easy to see.

Today I Ordered for my G34, the Adjustable Rear with Fiber Optic and the corresponding size F/O Front sight.

Green in Front, Red in Rear ... should yield fast target acquisition in daylight .... they suggested the thinner front sight which will allow for a little open space on each side when sighting.

This will be my set up for IDPA Matches for the 6-7 mos. of the year that we are outdoors.

When I pick up a G17 (4th Gen) I anticipate putting on these same sights but with the Tritium instead of FO. They told me their Tritium Sights are from Trijicon and if you look at their Front Sights it actually says Trijicon on it.

This will be my setup for the 4-5 mos of the year that we are restricted to the Indoor Range where lighting is such that FO Sights just don't show up.

Ken

[Dawson Adjustable sights]

I just got them on and installed them. They are a big upgrade over the tru glo sights I had. Throw the gun up and you can't help but see these. I would have tried them years ago, if I had known they were this easy to see.

What did you use for a front sight?

Any pictures avail?

I cannot get the Dawson web site to come up.

Thanks

Ken

[Dawson Adustable on Glock 35]

http://www.dawsonprecision.com/ProductDetail.jsp?LISTID=2180000-1094593468

Found them after all ... looks like all I said before was 100% WRONG.

Ken

[Dawson Adustable on Glock 35]

i went with the .300 x .100 .......thanks for the input

I was recently told Dawson NO LONGER carries the Adjustable Rear Sights for Glock and we could NOT find them on their web site ?

See Post #58 above. I have a link to Dawson glock sights at Shooters Connection.

I saw that and was glad to find somewhere that has these .... my comment was that "Dawson" no longer makes or carries them, or, at least it appears that way from their web site. My only concern is ... why has the Makers topped them and what if it broke and you needed some part or service ?

[Dawson Adustable on Glock 35]

i went with the .300 x .100 .......thanks for the input

I was recently told Dawson NO LONGER carries the Adjustable Rear Sights for Glock and we could NOT find them on their web site ?

[13 or 14 LB spring for G34]

I'm a "newbie" to the Glock World, coming from 1911's. Have a G34 that I've only had for 2 months ... shoot it in IDPA.

What I'd appreciate learning is ... why do you folks switch these springs and spring weights? What are you achieving; is it reduced recoil?

What is the spring weight in my new, stock G34 ?

Thanks guys,

Ken

[Gen 4 Model 34 Due Out When]

Any news about when there will be a new Model G34?

When will it get to Dealers.

Will it be Gen 4, or, will it be Gen 5?

I have a current model G34 and am considering buying a 2nd one and have one set up with Sights for Outdoor IDPA Matches (Fiber Optic)

and a 2nd one for Indoor IDPA Matches, including Flashlight Shoots.

Here in New England we are Indoors nearly half the year and shoot Flashlight Matches half of that time (3 mos.)

I find the Fiber Optic Sights are great in the outdoors in full daylight but are between "No Help" and "useless" in the Low Light or Mixed Light of our Indoor Range.

Thanks,

Ken

[Gen 4 Model 34 Due Out When]

Any news about when there will be a new Model G34?

When will it get to Dealers.

Will it be Gen 4, or, will it be Gen 5?

I have a current model G34 and am considering buying a 2nd one and have one set up with Sights for Outdoor IDPA Matches (Fiber Optic)

and a 2nd one for Indoor IDPA Matches, including Flashlight Shoots.

Here in New England we are Indoors nearly half the year and shoot Flashlight Matches half of that time (3 mos.)

I find the Fiber Optic Sights are great in the outdoors in full daylight but are between "No Help" and "useless" in the Low Light or Mixed Light of our Indoor Range.

Thanks,

Ken

[LH Index Finger on Trigger Guard for RH Shooter]

mine is different but not strange. Im right handed and the pad/tip of my left thumb is touching w/ a gentle pressure on the front left corner of the trigger guard. It started as an enos grip, thumb pointing towards the target, and evolved into this mainly due to the effort to cant my left wrist a bit more aggressively forward and grip my left hand firmer on the gun. I did not force it or consciously made it that way. I had not even noticed it evolved and I am comfortable w/ it.

I think that is the same thing I've done .... feels comfortable to me with most of my Guns (but now all of them).

Thanks to all for your reply's ,,, helpful and appreciated.

Ken

[LH Index Finger on Trigger Guard for RH Shooter]

Yes, that is exactly what I meant