Lynyrd
-
Posts
52 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Lynyrd
-
-
1 hour ago, IHAVEGAS said:
With 147 SNS coated flat point I had intermittent ftf issues when loading too short.
1.15 worked very well. None of my CZ barrels were throated.
Ihave: I started at 1.125-1.130, I shorten to 1.170 -1.120 still doing in very intermediately (ftf), like once a shooting secession, @150 rounds, I thinking of 1.100 next try, its either get worst or go away.
-
hal, sorry for the double copy, a newbie here
-
10 hours ago, hal1955 said:
Campro is a brand of bullet. Yes, jacketed. No feeding problema at all in S2.
Thanks Hal, not in Canada and the $ conversion and shipping would kill me.
-
11 hours ago, George16 said:
I have also used Blue bullets, acme, BBI and precision bullets. It’s the same thing. The bullets ogive determined how long I seat each particular bullet. The Precision coated bullets seated longer than the Blues, acme and BBI bullets.
George, that's what I am using Blue bullet 135gr. almost a flat point so I can get alittle more length out of them, I made sure the plunk check is good that where my OAL. is now and what I am finding is the tips get dented as they chamber my question is should i shorten them to remove this possible feeding problem, if it will do anything at all, as minor as it is at this point, unless there another issue going on I am leaning towards my loads. or am I just preordained to copper plated/jacketed tips?
-
no feeding problems? whata re Campro's ?? Jacketed??
-
1 hour ago, Lynyrd said:
I know CZ barrel chambers are short, after my try with 124 gr round nose tips that I had to keep <1.090 other wise they would hit the lands. I switched to a flat point style tip (135 Gr) and it allow me more OaL (1.120) for my loads. I have switched top ends w/ new barrel on the pistol to include an optic mounted from Cz custom, recently every shooting session I have at least one miss feed (round wont chamber), This round and others I extract from being chambered all seem to have a nicked tip. I am using epoxy coated tips, any suggestions or experience with this kind of issue? should I go back to a shorter OAL?
Sounds like your both are using copper or jacketed bullets, alittle more costly. thanks for the input and the merge.
-
I know CZ barrel chambers are short, after my try with 124 gr round nose tips that I had to keep <1.090 other wise they would hit the lands. I switched to a flat point style tip (135 Gr) and it allow me more OaL (1.120) for my loads. I have switched top ends w/ new barrel on the pistol to include an optic mounted from Cz custom, recently every shooting session I have at least one miss feed (round wont chamber), This round and others I extract from being chambered all seem to have a nicked tip. I am using epoxy coated tips, any suggestions or experience with this kind of issue? should I go back to a shorter OAL?
-
I know CZ barrel chambers are short, after my try with 124 gr round nose tips that I had to keep <1.090 other wise they would hit the lands. I switched to a flat point style tip (135 Gr) and it allow me more OaL (1.120) for my loads. I have switched top ends w/ new barrel on the pistol to include an optic mounted from Cz custom, recently every shooting session I have at least one miss feed (round wont chamber), This round and others I extract from being chambered all seem to have a nicked tip. I am using epoxy coated tips, any suggestions or experience with this kind of issue? should I go back to a shorter OAL?
-
it has helped, all gone, it just erk's me that I never had this problem before switching out my powder station. thanks to all !!!
-
Dirtchevy, I don't lube my cases, I have never lubed my cases and any never had this issue before. don't like the lube left on the cartridge after.
Mickeyjones and Dillion It only sticking and popping in the crimp die, at least when I run one cartridge through each station its where its happening. not sure I'd call it small, it starts to change adjustments after awhile of the other stations, like the powder charge and OAL. I am loading 45 acp, my crimp is @ .470
-
When running single cartridge in each station no problem smooth until the crimp die station. Changed out crimp die, looked at holder, greased press. Only in the crimp die station the press it sticks and snaps pretty loud when lifting up on the handle. any suggestions? not a new press, maybe15- 20 thousand, recently changed entire powder station found cracked in cast metal.
-
Hello Guys,
I am using N320 powder @3.6 grs, with 135 Gr Bayou tips, with my barrel 1.120 is to long, any data between you guys to say going to 1.110 with the 3.6 N320 is safe pressure wise if it plunk checks good, or short I back down charge as well?
-
what am I doing wrong, adjusted for hours couldn't get it right???
-
I am in the Market for new hearing protection and I want Pro ears. I like the slim down line, outside use, not an indoor shooter any more. Could be used with rifles. any and all suggestions and like / dislikes welcomed!!! forward thx
-
a question back to you Sandbagger AC = Accurate No 2? and 1.15 oal doesn't mean 1.150 correct ?
-
Materials on hand; 135 and 125 Gr Bayou bullets, pistol CZ75 SP-01 Accu-Shadow, powders in use Accurate No2, Titegroup, Auto Comp, WST, Fed/Winch/ primers, ;please include OAL, any and all info would be appreciated ! Pre thanks!
-
9mm 135 Gr & 125 Gr Bayou Bullets, Pistol; CZ SP-01 CZ75, powders to work with Accurate no2, Titegroup, Auto Comp, WST ? closest to Production PF. Fed & Winch Primers. please include OAL. Pre thanks!!!!
-
you know when you should walk away and come back later for a fresh look well, thanks to everyone for the help, found a loose resizing die, problem resolved, beside me being an idiot !!!!
-
That's what I called it, When I bring the handle downward to its fullest lower position there still arm movement downward. I don't know how else to explain it. Maybe I am just putting to much arm into it?
-
Just replaced the powder assembly and after adjustment I notice there is to much over travel past the full downward pull. Anyone know how can I adjust this over travel out of it.
-
thanks mimiller1 good suggestion, trying the scale in another environment, we have had such Cold, I think it maybe effecting the scale.
-
Ever hear that they don't make things today like they did in the past!!!! take heed!!!! Cowboy1629
-
Hello People, just started to get into the reloading mode today and my electronic scale starts to act up, could be basement temperature, the 2nd Dillion scale shot that I've own, no more, need a replacement ASAP!!! what are reloaders using out there, Brian E. shows a nice Digital scale not sure if they have them in stock, but ready to buy!! any input for you al would be helpful!! thx Leo
-
thanks too Blackhawk and Donny !!!
Cz SPo1 Shadow reload's length question
in CZ
Posted · Edited by Lynyrd
yes, its from being chambered and i figure the reason for the intermediate feeding problem