Versa Max Mag Spring

[elynch2007]

I installed the Nordic MXT +7 tube from my 1100 on a new Versa Max using a new Versa Max nut and the old spring and that was cut at 14 inches in the 1100. The last round was not feeding on the Versa Max and only measured 13 inches in the Versa Max. Installed a new Nordic spring, I thought I would start long and cut until I could load 11 in the mag. So cut it 17 inches and installed, found 11 would go in to the mag with around 3/8 inch to spare.

Is this too much spring for a Versa Max with a +7 tube? Seems to be working great as is.