Kaskillo Posted June 23, 2014 Share Posted June 23, 2014 I process TONS of LC once fired .308 on my Dillon 1050 and I use Dillon steel Full sizing dies. I used Imperial Wax and Dillon lube but same same results so I know it is NO a lube issue. After sizing I Gauge the cases using my Dillon .308 case gauge, NO problem. I take the same case and drop it in the Sheridan .308 case gauge but it won’t go all the way. If I drop the cases backward in the Dillon gauge it goes ~ 3/4” but only ~ 0.20” in the Sheridan. Seems like the case gauge is a little too tight at the web. Anyone experienced same issue? Link to comment Share on other sites More sharing options...
Kaskillo Posted June 26, 2014 Author Share Posted June 26, 2014 No one? Link to comment Share on other sites More sharing options...
freakshow10mm Posted September 11, 2014 Share Posted September 11, 2014 Sheridan is a SAAMI min spec gauge. It is tighter than others. The two other steps in the gauge act as a go and no-go gauge. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now