gringop
-
Posts
46 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by gringop
-
-
Ive been shooting IDPA for 14 years, all with an IWB holster. As long as it's good quality and the holster mouth does not collapse when the gun is withdrawn, IWBs work great.
Unfortunatly, it looks like the G36 is a "slimline" model using singlestack mags. I don't think G21 or G30 mags will fit. You are stuck with 19 rounds in IDPA.
Gringop
-
I think it is the other way around.
Concealment is required unless the CoF says it is not.
"Standard" is not a magic word relieving you of the need for concealment. If the MD and SO want to run standards from under concealment, you may not say them nay. Only the Classifier never requires concealment.
I agree with you completely
I have trouble with people who only put on their concealment while shooting.
If you actually wear a gun to town, you can't open carry just because it is hot (most jurisdictions.)
I do a lot of things on the range that I don't do in town, like run around behind guys shooting guns with my timer held high in the air, for 3 or 4 hours in the heat of the Texas August sun. I find that I last longer, am more alert and make better decisions when I don't have 2 layers of shirt on. That way I shoot better when I do have 2 layers of shirt on.
If I were SOing a stage and you said "Wait a minute while I put on my vest." my response would be "Next shooter, are YOU ready to go?"
Probably why I don't get recruited to SO any more.
I do the same thing. That why we tell everyone to prep when they are the shooter on deck.
Gringop
-
A cover garment is not required for the classifier first off and other than that a cover garment is usually needed for scenario based stages and not for standards or skill based stages.
I think other than the classifier it's kinda up to the match director, some clubs require a cover garment for everything except the classifier.
Greg
"not for standards or skill based stages."
Can anyone provide anything from the rulebook or from IDPA HQ that supports this statement?
It's my understanding that the only time when concealment is NOT required is when the Stage Description indicates that it's NOT. Even when it's 105 degrees outside, why can't the shooter don his concealment garment before LAMR and take it off after UASC. As far as table, or bed starts, you still need to reload from underneath your concealment garment.
Gringop
-
Don't you folks know? "THIS IS SPARTA!!!!!!", IL.
Gringop
-
I carry and compete with my G19, Sparks Exec Companion and Bianchi double mag holder. I mainly shoot IDPA with a little Steel Challenge and USPSA thrown in.
I have a G17 and a kydex OWB holster and can see a little draw speed improvement with the kydex but I have so many reps with my carry rig that the grip and index change with the 17 means I'm slower with it than I am with the 19. Both guns have Amerliglo Defoor sights and a "-" disconnector.
I classified SSP Master with the 19 and carry rig but have failed twice to make ESP master. I may have found my limit on that setup.
Gringop
-
After 13 years I finally made SSP Master with my carry G19 and IWB holster. Might have to try for ESP and move to a G17 and Kydex.
Gringop
-
There is no 24"x24" platform on a Bianchi barricade.
From the 2005 rule book.
"Bianchi Style Barricade: A barricade wall the dimensions of which are 24” wide by 6' tall. The shooting box is 24” wide and does not necessarily have a back to it."
The shooting box can go back to infinity, depending on the size of the bay.
That being said, if I see a shooter's foot go outside the line on the SIDES of the shooting box, they get a PE.
Get rid of that Platform and build a regular Bianchi barricade. And ask to see your SO's IDPA card and check to see if it has an SO sticker.
Gringop
-
I also vote for Karl at KR Training for good instruction.
If your buddy wants a good place to shoot, have him look at the Austin Rifle Club.
www.austinrifleclub.org
It's not as close to Westlake as Reds but has IDPA and USPSA matches many time a month, multiple ranges from 15 to 200 yards and all applicants must pass a criminal background check and a safe gun handling live fire test.
Disclaimer: I teach some of the pistol classes at ARC.
Gringop
-
Thanks for everyone who replied. I have much a better understanding of what to tell my student re. club and sanctioned matches.
That being said, I want to mention that ESP and SSP guns do not have to have 10+1 and CDP does not have to have 8+1.
I remember those arguments back when I started shooting IDPA with a Kimber Compact and later a full size with crappy old 7 round mags.
From the rule book;
Should division capacity not be achievable because of lower magazine
capacity, load to maximum mechanical capacity of magazine
plus one (1) round in the chamber. Competitors must use the
same capacity magazines through out the competition
(Example: if you start with a 9 round magazine, you must use
that capacity magazine throughout the match).
Thanks again, Gringop
-
I had a student ask me about this and I figured I would get some input from others on the forum.
Let me say that I think carrying and competing this way is goofy but I hope the student will come to understand this once he starts comparing times.
Has anyone see this in matches and is my answer below correct?
Thanks, Gringop
The student's question.
"Someone always carries w/ empty chamber and hence would like to drill the "draw and rack slide"
behavior, on each draw, during the match.
This seems to run afoul of the rules as I read them, and I'd guess you'd get a procedural on this.
Does anyone do this? (i.e. draw w/ an empty chamber consistently and intentionally in matches)"
My answer.
"I have seen this at club matches and the shooter did not get any penalties.
If they were shooting CDP, they would start with 8 rounds in the mag in the gun, and have 7 rounds in their spare mags on their belt.
If they were shooting SSP or ESP, they would start with 11 rounds in the mag in the gun and 10 rounds in their spare mags.
Since drawing and racking the slide is not giving the shooter a competitive advantage, it would not be cheating as long as they did it the same on every stage. Reminding the SO that you are using 7 round mags (except the first one) should keep him from getting confused and giving you a PE."
-
At our local IDPA club, I've won the last 3 matches I attended.
6-20-09, won CDP, 3rd overall.
7-18-09, won SSP, 2nd overall
7-26-09, won SSP, 2nd overall.
Now I just need to figure out what I'm doing and do it some more. Hmmm, maybe it's time to start shooting sanctioned matches again.
Thanks for a the great info and help on this site.
Gringop
-
I'm trying to develop a timeline of practical pistol shooting. I have most of the big dates, Leatherslap, Southwest Pistol League, Columbia Conference, start of USPSA, start of IDPA, etc.
I'm trying to find the years when Limited 10, Production and Singlestack begin in USPSA. I am not a USPSA member (yet) and don't have access to the members website. Can anyone give me the info or point me to to it?
Thanks, Gringop
-
I would suggest testing the same ammo combo off a rest at 15 and 20 yards. There are just way to many variables shooting at 100 yards freestyle and watching the bullet impacts in the berm.
Get scientific on it!
Gringop
-
A 2000 Honda ST1100. Bungie the shooting bag on the seat and go. Watching for speed traps and the wind in my face wakes me up and keeps me alert. 40 mpg crusing at 80.
Gringop
-
It is a simple fix to take this out of being guesswork by the SO to being pretty much an easy fault/no fault call.
Craig
How do you set a foot fault line for 3 targets 7 yards downrange, 3 yards from each other, each requiring a shift of the body to engage? The whole point of using cover is to not expose your body to the targets. If you want foot fault lines, shoot IPSC.
The best way to deal with Cover issues is to have the Scorekeeper checking the shooters angles and calling cover and the SO looking at the gun.
Gringop
-
Montana Gold's order page is
https://secure3.mooseweb.com/montanagoldbul...m/pricelist.tpl
Try going direct to this page.
Gringop
-
Ach! I will work on dry fire and report back after the next live fire practice session.
(homer) Stupid weak hand trigger finger!(/homer)
Gringop
ETA
I switched eyes when I switched hands.
I also confirmed this by shooting my Ruger 22/45 weak hand from a rest. I still get a POI shift.
Thanks all for the ideas.
-
Being a masochist, I have decided to start practicing and shooting IDPA matches with my weak (right) hand. In the past, I have always practiced some WHO at every range session and just used Kentucky windage to get my shots on target, ie. POA is a bit high and right and POI is dead on.
So today I start shooting weak hand freestyle and my POI is constantly about 4" left at 10 yards. I ended up cranking the sights over about 3/32 or 1/8" to get my hits looking good. After having a good (but slow) practice session, I moved the sights back to the original zero and confirmed it shooting strong hand from the bench.
My question is what could be causing this difference in POI and how can I get rid of it?
I'd rather not be cranking my sights back and forth every time I practice or shoot a match.
Gun is a G19 w/3.5lbs connector. The POI shift was consistent no matter how much finger I had on the trigger (tip, pad, joint) or how much pressure I used on the weak hand.
Gringop
-
A skeleton walks into a bar and says, "Give me a beer.....and a mop."
ETA- dang, dupe time
Gringop
-
Those are cheap junk that will get torn up pretty quick with jacketed pistol ammo. Since they want $96 for the 9mm-3006 version, you could get a real 500 Brinell auto-reset mini popper from LETargets for the same price that you can shoot pistol, rifle or shotgun on.
Auto Reset Pepper Popper (M520)
http://www.letargets.com/html/steel2.html
Gringop
-
The tumbler that I bought not even a year ago shit the bed last night.
Did it just stop working at all? Start running slow?
I have Midway that is about 10 years old. It used to get real dusty and the bearings would dry out and it would slow down. I would loosen up the motor and lube it and it was as good as new. I now run it out on the back porch where it can't get saturated with dust.
Then it stopped completely. I found that the wire to the motor had broken off from the vibration. With some solder and electrical tape, I got it reconnected and it has not had any problems in the last 4 years.
These things are just a plastic bucket on springs with a motor and a weight. Dig into them, diagnose the issue and fix it.
Gringop
-
2/15/08
the case mouth catches on the metal follower at the powder station, and 1/2 of the powder charge spills out. If I shake the case as it enters the follower, everything works fine.
Mike
Is it possible that you have the powder funnel/drop tube in upside down? The end with the ring on the ouside should be up and the end with the ridge on the inside for the case mouth should be down.
Also, is your shell plate tight enough so as to turn freely but not let the case wobble as it moves to each station?
Is the drop tube corroded or scratched where the case mouth enters? You might want to smooth it with some fine grade wet/dry sand paper, like 600 or 1200 grit.
Lastly, are the case mouths chamfered on your brass or does it have a sharp edge that might be catching.
These are the only things that I can think of that might cause your issue.
Gringop
-
As the title says, a friend is getting himself worked up to buy a FNP9 for carry and IDPA. From what I can find out, the biggest drawback is the lack of accesories availible. Does anyone have any experience with these guns? Do they hold up to the high round count of competition? Any info is appreciated, my friend is headed to the gun show tomorrow with cash in hand. What arguments can I give him to get a more popular/mainstream gun.
Gringop
PS. He hates Glocks
-
I agree with the fact that overuse of shaky cam is ruining movies and TV. The creators are using old advertising techniques to make up for poor story, dialog and visual composition. They are purposely adding ANNOYING visual elements in the hopes of keeping our attention and distracting from the weak elements of the film. Just like commercials with annoying jingles or guys wearing red pigtail wigs.
In the old days, the equipment was so big and unwieldy that pans, zooms and tracking shots were considered daring and added excitement to the images. As equipment came down in size, directors started using more mobile camera positions and techniques. Helicopter shots, car shots, boom cameras. All these added the ability to give breathtaking visual frame shifts to the images that we were seeing. Then steady cam mounts came along and now the camera could follow action almost anywhere and give a visual perspective almost exactly like we have when we are walking down the street.
Then the shaky cam kids came along. Used in a limited fashion, shaky cam can convey valid ideas and concepts. But in true dummy fashion, some directors figured that if a little is good, more is better. In Blare Witch and Cloverfield, they did it to convey the amateur status of the supposed cameraman, a regular Joe with a cheap camera. But in the last Borne film I went to see, they still used it all the freaking time. Every 2-person dialog had partial faces moving around in the frame. When you or I as the viewer, get distracted from the story of the film and pulled back to reality because of an annoying camera technique, then that camera technique has failed to do its job and or is being used incorrectly.
I wish a pox on every director who uses shaky cam as a prop for their piss poor film craft. Maybe we could send them over to the Middle East for some documentary work. They might have a valid use for some shaky cam there.
Gringop
Tatical Timmys
in Miscellaneous BEginners
Posted
Are you guys charging a fee for this match? If it's advertised as an IDPA match and I were to go shoot it and pay a fee and I find out that it's just a bunch of guys that don't know the rules and make up stages on the spot then I would be pissed and complain loud and long. It doesn't matter if it's a sanctioned match or not, if you call it IDPA, then it needs to follow the IDPA rules.
It sounds like you are just practicing. If so don't call it IDPA. Call it Slapdash Happy Fun Match. Then you can ignore the rules and Tactical Timmy can't complain.
Gringop