EJMK22
-
Posts
9 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by EJMK22
-
-
9 minutes ago, chenault said:
No, it's still a great load, though I've switched to Sport Pistol just because of cost. If cost wasn't an issue I'd be back at that exact load.
Thanks for the update, I loaded (25) Rounds with 4.0 N320 Acme 124 RN-NLG, tested using S&W M&P2.0 5" that was adjusted for Remington FMJ factory Ammo. They shot low right at 25' I changed Ami point and hit the mark. Guess its normal to have that change. Going to make a 100 and also make 100 with your setup using 4.4g. Thanks again
After I set aim point to top right, going to have to change the Trijicon RMR type 2 3.25 MOA to new bullets.
Bottom Left was me LOL.
-
On 12/12/2018 at 7:04 PM, chenault said:
I've found a load that's become my go to load.
124gr ACME BULLET
1.50
4.4 gr N320
132 pf
Might lose a grain and see what I'm at, but it's a damn accurate load for me.
I will be loading 9mm 124g Acme new type and cross referencing the Vihtavuori website looking at RN Rainer not sure if thats correct as they do not list Acme. The site has listed N320 max at 4.1 does your load have any issues? Unless I should be looking at a different RN coated bullet type. Thanks
Bullet 8,0 g / 124 gr RN, Rainier C.O.L. 29,0 mm / 1.142 inch Powder Starting load Maximum load Type Weight Velocity Weight Velocity [g] [grs] [m/s] [fps] [g] [grs] [m/s] [fps] N320 0,24 3.8 305 1000 0,27 4.1 326 1069 N330 0,27 4.2 324 1063 0,30 4.7 344 1129 -
Thanks Darrell, It for indoor, Acme 9mm 124g lead coated and PD 124g JHP first time loading 9mm have been doing 38/357.
-
3 hours ago, SlappyMcTrigger said:
After reading several threads on this exact same topic I loaded some JHP test rounds last night at 1.09” for a shadow 2. Raining today and the wife is celebrating another trip around the sun but I’ll report back hopefully tomorrow.
I did test PD’s 124 -FMJ earlier and here’s what I got.
Was in the 60’s and COAL was just under 1.13”. Didn’t plug in the 4gr load since this was closer to my goal of 132-135 pf. The “TG” is titegroup.
Thank you, SlappyMc Trigger, I look forward to the update....
-
7 hours ago, Hi-Power Jack said:
The N320 is The Classic load for 9mm minor.
Seem to recall that Darrell thought the N330 was the most accurate ?? Might be wrong there.
I have used WW231 for decades and think it's a great powder for 9mm and .45.
As Darrell said, search for Darrell and you'll find the answer to your question.
You might want to provide a little more info re: your request. What's your intended
use of the powder ? USPSA ? Steel ? What velocity are you looking for ? etc
Thank you for all the good information, the guns Smith & Wesson M&P M2.0 9mm 5" FDE with a few Glocks, 34, 19. Most of the shooting is open range or indoor range 50 ft.
-
Thanks Posvar, Im setting up the press now for 9mm, will check barrel test and see how it goes.
-
On 6/18/2019 at 12:43 PM, Darrell said:
As said earlier PD load to 1.100, but in my testing I got better accuracy at 1.080". I have shot at that length for years and this is my goto bullet. Works in all my guns from 1911's to short chambered CZ's. Do a search for my name and you should see a spreadsheet with all my loadings.
Darrell I just bought 2000 rounds 9mm JHP 124gr what did you find as a good 9mm load? I have been loading 38, never 9mm I have Vn 320 and Vn330 with Win231 Bullseye and Trail Boss. Thanks
-
On 1/9/2020 at 2:01 PM, DJNKY49 said:
I'd stick to the Precision Delta 124gr JHP. Great Pricing, excellent customer service, and very consistent!
I just bought 2000 124gr JHP from them in 9mm for a Glock 34 and S&W M&P2.0 5" any suggestions on OAL, load info new to 9mm loading. I have Bullseye, Win231 and Vn320 Vn330.
Thanks.
-
Checking in to say hi, new to the site and reloading looking forward to all the great information.
Thanks
X5 competition load
in Sig
Posted
US Midway has Free HazMat with Vihtavuori Powder Purchase over $150
https://www.midwayusa.com/promo/vihtavuori-0120