[Is VV 3N38 worth the price for 9mm major]

On 8/10/2018 at 7:34 PM, Leadpilot said:

Burn rate is the only common factor. I’ve found that the Lovex is cleaner and much softer in the hands. In the pic Lovex is on the left and aa#7 right.

have you chono the rounds yet?

 

[case ejected to breech face, 9major jam]

On 8/17/2018 at 2:00 PM, Broncman said:

Brazos ejector cured mine. Do make sure you have enough extractor tension though. A well shaped extractor to allow feeding of the next round, but strong enough tension so the next round in the mag does not dislodge it before it hits the ejector.

 

With just a bare slide, a round inserted under the extractor, it takes a healthy thump to dislodge the case.  

Brazos site will tell you how to tune ejector

[9 major or 38 super comp for open?]

On 8/14/2018 at 9:33 AM, blindmarksman said:

9 major = cheaper brass = more shooting 

Yess it is

 

 

[9 major]

12 minutes ago, wick said:

spot on run same loads out of my CK

MG 115jhp 10.5  oal 1.165  AA7 spp and spr  no blow out primers

[9 major]

On 7/10/2018 at 6:32 PM, 36873687 said:

Ck full size aa7 9.7. 1.165 Pd jhp124.     An 10.5 aa7 1.165 pd 115 jhp

spot on run same loads out of my CK

[Open gun help]

major load will make the comp work 

[Open 9mm ejection problem]

more extractor tension and file your ejector per brazos site.

[Custom Open Glock]

the main problem with open glocks are WT. and you have to load short 1.145 because there mags wont take loading long. That is a nice looking build i started open with a open glock 17

 

[Getting an STI DVC OPEN, need help with 9mm major load]

On 3/16/2018 at 1:24 PM, Bwilmot said:

In my sps vista 9mm I’m making major way under the numbers you have with aa7.   Mine is a 2port comp with no holes.   Aa7 9.6gr under 115.  167 pf

AA7  is by far the softest powder that I’ve tried.   

KKM barrel Chilly comp with 3 holes 115cmj over AA#7 10.4gr  172.50pf.

[147 gr blue bullets and WST]

13 hours ago, 4n2t0 said:

 

Ok...

 

The OP asked about WST, not WSF.

And he ask if he sould invest in somthing different" So I posted my load "

[147 gr blue bullets and WST]

12 minutes ago, 4n2t0 said:

 

Did you mean WST?

No WSF is what I ment

[147 gr blue bullets and WST]

WSF 147FP 3.9gr good 9 load start low and work your load up

[Sti Trubor Blowd Up w Autocomp]

I have one slide crack using 9mm  WAC 7.1 under 124JHP  1.165  7000 rounds not saying it was the powder.On to AA#7 and like it alot.

[Getting an STI DVC OPEN, need help with 9mm major load]

AA#7 10.4 under MG 115jhp  1.170  make sure you start low around 9.7 and work up. Ive used autocomp for a year and some HS6 and AA#7 is the way to go. Ive also been playing with 124CMJ over 9.7 AA#7 at 1.80 nice load.

[Extractor problems]

stove pipes extractor. Install second spring in aftec

 

[STI DVC Open gun ejection advice needed 9mm Major]

more tension on the extractor and they wont come back at ya

 

[Coated vs Plated Bullets]

I do not crimp blue bullets at all and you have to have you bell right