Jennslife15
-
Posts
34 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Jennslife15
-
-
4 minutes ago, muncie21 said:
CZ-USA used to advertise a co-witness package deal that included sites and the optic plate. Now that their 'parts' web site is not available (not sure if this is temporary or permanent) I cannot check to see if it is in stock or not.
Thank you,
I was able to get on there today. They still don’t have the kit available for the rmr/sro.
-
Hi,
I have the p10f and p10c optic ready guns and have not been able to find any sights that will co witness with the optics (SRO and RMR). Does anyone know if anybody makes these?
thank you!
-
I cant wait for this. Will be my new carry gun ♥️
-
Hi all,
I just received my "upgraded" p320 back tonight and it has a horrible problem. The slide sticks out 3/8 of an inch from going back into battery when I rack the slide. When I push it closed, there is a heavy metal on metal grinding noise and feeling, the whole time while closing. I am disgusted with Sig. How could they have sent this out to someone? I have cleaned and lubed it and the problem persists. If I do not close the takedown lever fully, the slide moves smoothly back and forth. Once I close the take town lever, the slide sticks 3/8 inches out and seriously grinds closed when I push it. Any ideas? I have a competition tomorrow night I was hoping to have this back in action for. Thank you in advance for any input you may have ?♥️?☺
-
Just received the email, mine is finally heading back after 3 weeks ??
-
It took me 2 months after I went online to start the process before I received the email to send it in.
-
I sent mine in (320rx) over 2 weeks ago. I see all these super fast turnaround times on-line and I am starting to worry about mine. I called to check on it, and all they could tell me was that it was there. Do you guys think I have anything to worry about? They say 4-6 weeks, but most people have had them back in hand, in less than two weeks ?
-
I just got a call that my P10C was at my lgs. I pick it up tomorrow after work, so they are here for sure. They had 50 on order and only received 5. Luckily I was #1 on the wait list ??
-
All done ❤️?
Edit: picture is too large to upload :-(
-
On it's way home to me :-)
-
Tok36, that is where it's at getting the pro package. I asked for the Boba Fett style, but in these colors. I really love it. It's like Boba Fett's sisters gun lol :-)
-
Almost done ??
-
I can't find them on the website ?? Does anyone have a link, I need a few of these :-)
-
It's a brand new gun, about 3 weeks old with only about 350 rounds. I use factory ammo only.
-
Levi, since it is a decocker, da/sa is my only option, and honestly I think I am OK with it. Getting better every time :-) My stock magazines are actually MecGar 15 rounders. I thought they were 17's but they are not. They are sold specifically with CZs coming to Colorado with our 15rnd limit. I did check my recoil spring once, but I will check it again tonight. Thank you :-)
-
Arkadi, thank you. I believe that I am tense, this trigger is nothing like I am used to. Even with that, I am more accurate than I have ever been lol. I have won my last two women's matches and finished in the topast 25% of the men's. I really probably just need more live fire time like you said. On the malfunctions I had, I just could not get the magazines out, they were jammed in there. I will give it more force of it happens again. I watched a video where they fixed it that way and it seemed pretty fast. Thank you again :-)
-
Thank you grumpy for the article. I will try this after work tonight. In the article I can clearly see the yellow part that needs to be polished, but I can't see the red part that needs to be beveled. Is it actually there or is it the colors on my phone playing tricks with my eyes?
-
Awesome guys, thank you! I will look into the short reset kit and see if it is something that I can do myself. Those videos were the exact malfunction I had, so now I know how to clear them properly. Thank you again, that was just the help I was looking for :-) Jen
-
I have a brand new CZ SP-01 tactical that I just started using in indoor matches last week. Before this I mainly used my Glock 34. I daily carry my CZ P-01 so I wanted to compete with one also.
The bigger problem is that tonight I had (what the range officer called) three type three malfunctions. They took me forever to clear and I was a mess after them lol. I can't find any clear answer on what causes them. Does anyone here know? I have an 11.5 pound hammer spring, 11 pound recoil spring, extended firing pin and reduced power springs for it and the fpb. I ran factory federal last week and a local (very small)factory's ammo this week. I use MecGar 17rnd magazines. Do I look at my parts, magazines, ammo, or user error for the problem?
The smaller problem is me. I kept messing up my trigger pull. I was constantly not letting the trigger out far enough to reset before trying the next shot. I can't even imagine this because the reset is so much shorter than my Glock. I dry fire a lot, so is there anything else I can do?
Thank you for any help! Jen
-
I stand corrected. I saw a picture of the new SP-01 and thought it said Omega also, but it did not :-(
-
I am curious about this as well. CZ is putting many different Omega Triggered pistols out on the market in 2016, so this will be good information. The new ones will also be able to switch from decocker to safety or back again whenever you want like the p07 and p09. I know an SP-01 and P-01 are coming, and probably more.
-
Well CZ's have a Few more parts but they are fairly straightforward. Manual safety guns are a far easier to work on than those with decockers. Big white towels and magnets are your friends.
I have changed the firing pins and springs and easy stuff, I am just majorly intimidated by the tiny springs inside. I guess I should just go for it and learn that way lol. I'm sure once I get it done once or twice, I will be good to go. Thank you for the replies :-)I was very intimidated the first time I completely disassembled my CZ. Follow some of the great tutorials here and on YouTube. Then go slow and work in an area where you will be able to find tiny springs. Ask me how I know about this!!! It is now fairly simple to work on any of my four CZ's and numerous CZ's of friends and fellow shooters.
Sent from my VS986 using Tapatalk
Darn, and both of mine are decocker lol. I have a P-01 and 75bd. I just need to pay someone in colorado to walk me through it lol!
-
I was very intimidated the first time I completely disassembled my CZ. Follow some of the great tutorials here and on YouTube. Then go slow and work in an area where you will be able to find tiny springs. Ask me how I know about this!!! It is now fairly simple to work on any of my four CZ's and numerous CZ's of friends and fellow shooters.
I have changed the firing pins and springs and easy stuff, I am just majorly intimidated by the tiny springs inside. I guess I should just go for it and learn that way lol. I'm sure once I get it done once or twice, I will be good to go. Thank you for the replies :-) ??
-
Never heard of anything like that. Most people follow the online guides on how to do an action/trigger job.
An armorers class for something as simple as a Glock sounds ridiculous anyways, lol
Sent from my VS986 using Tapatalk
I agree. Glocks are almost "do it with your eyes closed simple". But, it was more education and you can never have too much of that :-)
Xcarry Barrel without LCI available?
in Sig
Posted
Hi,
I am piecing together an XCarry with the Sig FCU. I have everything but the barrel so far. I bought Sig’s 3.9” slide for it that is cut for the LCI. I will be running an optic and was wondering if any of you may know of a barrel that will work that does not have an LCI cut in it? Thank you all in advance