Chips0410
-
Posts
0 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Chips0410
-
-
I run a psa factory build ar9 with a glock mag lower ... it has not skipped a beat yet through 1500 rounds very accurate and well put togther little rifle I would definitely suggest one. Also highly recommend are the TF +10 base pads can get 41+1 with a factory glock 18 mag it's been a great combo so far for me
-
Hi Chips0410,
I'm a resident of Twin Falls now, and a member of MVPSA (although I don't even own a gun yet).
I now need advice on where to buy reloading supplies (powder, bullets, cases). Where do you usually do your shopping for that sort of thing?
Thanks
Steve
Sent from my SCH-I545PP using Tapatalk
Welcome to the area! I run leatherhead bullets in my pcc and cArry optics gun which I either order online or buy from hawktech in Boise the owners are great people and do a lot for the local shooting community. As far my open gun bullets I order them online from precision delta. For powder, primers, presses and anything else competition shooting wise i highly suggest hawktech arms in Boise which is only few hour drive .. also idaho custom arms and ammo carrys sti's and some bulllets and brass....
Sent from my iPhone using Tapatalk -
On 9/9/2016 at 7:01 AM, Mulkey said:
I can't get ahold of anyone there and I was hoping to have a sight for a match on Wednesday. Not the end of the world.
Mulkey if u replace the front sight u not going to have a excuse for losing to me
glad u got that new 8" long front sight think u have about a half pound of fiber in that baby !!
-
7.0gr ac
1.155 col
124gr Montana gold jhp
1400fps out of my dvc open
-
Deceided to try one of these myself ! Initial impression is I'm going to love this thing .. Glass is very clear the dot is super bright and easy to pick up ... Switched from a slideride cmore and loving how less cluttered the slide looks with this thing .... I modified a slide ride mount to fit this bad boy because I was to impatient to wait for a rts mount
only 100 rounds in and I'm liking it as long as it holds zero will be good to go 
-
I was able to get one response from Adrian and then nothing back in response ... I did do the Enos bend to my 170 and the mag ran flawless for me in last weeks match in my dvc open ... Hoping the 170 and my two 140 Mbx's keep running as state match is closely approaching
-
I've had issues with a 170mbx nose diving 5-6 rounds into a mag ... I did the "Enos" bend as advised by some guys on the forum and so far it's fixed the issue... Haven't had a chance to run it much since the fix but hoping it holds up like it has in practice
-
I'm a big fan of their products they make some top notch stuff everything on my belt is double alpha
-
Give that a try when I get home ! Thanks for all the tips I emailed Mbx as well see if they suggest anything different
-
So the Enos bend consists of Bending the 3rd coil up a bit ?
-
I'm needing some advice on a mag issue. Im Running a 170mm Mbx 9mm/38 in a 9mm dvc open. With new springs I loaded the mag to 29 and let it sit for 24 hours as advised by several other shooters.. The issue araising is I'm having rounds nosedive about 5-6 rounds into the mag and not wanting to load the next round ... Once I take the mag out and strip 2-3 rounds out the rest of the mag will run fine ... Any help on the matter would be appreciated
-
Are u from the Boise area ? I'm from twin falls but shoot quite a bit of uspsa in nampa and some in Emmett... Really good group of shooters in the treasure valley
-
I just received the limcat in the add today !! It's a sweet gun idk how it lasted that long on the classifieds ....
-
I really enjoyed my Trojan 40 combined with Tripp mags the gun ran lights out .... Until I got tired of reloding and bought a open gun
-
I run 10rd wilsons and they work great, also have had really good luck with Tripp mags
-
Oh and the range is about 15-20 min from twin falls
-
What's brining u to Idaho if u don't mind me asking ? I have a friend from Kenya that works for chobani in twin falls
-
Jerome range is $50 a year for a membership that allows u full access to our range and our full trailer of targets any time u want ... Uspsa matches are $15 for non members and 10 for members
-
Shooting in southern Idaho in general is great !! Twin falls we shoot uspsa 1st and 3rd sat of the month and 3 gun the 4th sat ... There is also matches in nampa and Emmett 2 hours to the east from twin and matches in Idaho falls 2 hours to the west of twin ... So u can shoot a match every weekend of the month all within a few hours of home
-
What part of Idaho ? From twin falls here
-
I really like my hornady ammo plant works like a champ and cranks out ammo quick
-
Run 40 for major pf and capacity and I run 38 super in my open gun brass is a pain but seems to shoot a little softer over 9mm
-
I've had glock 34 and the m&p pro ... I really like the m&p a lot for the money cant beat it
-
I'm a big fan of daa I've tried both and the daa are just better quality and it's what I use on all my rigs
glad u got that new 8" long front sight think u have about a half pound of fiber in that baby !!
PCCs that work - tell us about yours.
in Pistol Caliber Carbine
Posted
Factory jp gmr13 runs like a champ topped with trijicon mro have had one malfunction on it and it was a ammo issue