ArmyADub1
-
Posts
19 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by ArmyADub1
-
-
I have issues in a couple MBX mags. If shot to empty (the magazine), the mag won't always drop free. The follower hangs up on something. I've tried removing some material from where the front contacts the feed ramps. Seems when I do this, the follower just goes even farther forward and hangs up on the ramp. Could it be hanging up somewhere else?
I contacted Adrian. He said to leave the mag fully loaded for a day or two. I've done that for three days straight a couple different times. It solved the issue for one of my three MBX mags. One still hangs up when empty, and the third mag is hit or miss. I can't get it to reliably drop-free every time, nor to hang up every time.
Anyone else have this, or advice how to trouble shoot?
-
Can you get your hands on some at a match?
I was in the same boat recently. So much of these measurements are within small fractions of each other, combined with the differences of shape, within the same dimensions, that various grips can feel drastically different from each other. If at all possible, try to get your hands on as many different grips. Yes, it can be weird asking, but shooters are the nicest people around, and it beats dropping serious coin on something you're not sure about.
-
12 hours ago, Chutist said:
I've be though all of this over the past few months... Bought a DVC Limited ran it for a few months. The DVC was a nice gun but never 100% reliable. I sold it and did what I should have done in the first place.
I bought a Freedom Gunworks/CK Thunder Limited.
(sorry about the lint on the muzzle, didn't see it until after I had posted)
Where's your grip screw on the top of the trigger guard???
-
Two sight pictures will do more for your shooting than guessing what spring will let you engage the trigger as fast as possible
-
This right here.
I regularly use three (one in gun, one for reload, one spare) on my belt, and a barney mag.
There's another tuned, ready-to-rock mag in my range bag at all times though
-
Even on fault lines? I've tried a couple various cleats, don't remember exactly what (they might have been a Nike baseball cleat and a football cleat). Point is, none of the cleats I've ever tried were worth a damn when placed on any fault line; wood/PVC etc. It's even worse in the morning when there is dew on the fault line. That's been the major thing that's kept me in salomon or some type of rubber soled shoe. I wish I could make cleats work; they tend to be cheaper and have even better grip on dirt/grass/gravel
-
I have an edge w a lightened slide, and the reduced grip from xtreme shooters.
I had heard a ton about metal grips. When I got to finally shoot a couple (PT and SV), I was less than impressed. I believe it changed the characteristics of the recoil to something else that had become undesirable to me; probably from so many rounds through my plastic grip. What worked/still does for me, and everyone is different, is the lightened slide, reduced plastic grip, and a brass ICE magwell. YMMV
Best advice I've read on here is to shoot a ton of different guns if at all possible. It can get very expensive very quickly just buying parts that are hyped and may not deliver what YOU want out of them.
-
Changes PCC shooters will have to make to adapt to rules:
-Up range starts
-Pick up from box = Use bigger box for PCC , easily fixable
Changes pistol shooters will have to make to accommodate PCC:
-none
Alot of "all or nothing" thinking going on with this debate. PCC not being able to do classic uprange starts does not equal "oh shit I guess we have to completely abandon this." El Pres is a good example. PCC cannot do it the way pistol can. Logically, the simple fix is to have PCC have a different start. Pistol can still shoot it the normal way. Shooters are only scored in their own division so arguments about interdivisional fairness or whatever are moot.
Longer distance targets: most of my clubs' bays are not deep enough for this to be an issue. Carbine crowd would be completely ok with hosing stages because it is the same crowd as the pistol crowd. The desire is to shoot PCC in a USPSA match, not change matches.
^^^Nailed it
-
For STI Edge 5"
180gr Black Bullets
4.3gr Titegroup
1.135" COAL
CCI SPP No. 500
mixed range brass
chrono's 169-171PF
I'm sure there is small room for improvement, but it's a trade off vs what is regularly available in my area.
I have no doubts I can shoot tens of thousands of this without worrying that I won't be able to get powder or some other component.
Whatever you do, chrono it in any gun you may shoot, and record ambient conditions. Don't want to assume you're good to go on a 110F day, then chrono a late season match at 40F and not make major.
-
TTI looks good just Dawson looks easier with that slide out deal.
That's actually the reason I went to exclusively TTI. I had a couple Dawson pads where the slider got messed up. One wouldn't close, and the other actually lost the tiny detention mechanism that kept it closed. Used for less than half of a summer. Dawson would sell me replacement parts, either way, that's not durable enough for me.
One of my TTI pads has a barely perceptible dent. But still functions 100%
YMMV
-
Just got my Edge back from GH2 (George Huening), and needless to say, it is AMAZING!!!!!
Had the slide lightened and tri-topped, and a trigger job done while installing an SV trigger system. It breaks just a hair over 2 lbs. Reset? What's that? It's damn near perfection.
-
Mags
back up ear pro
lens wipes
towel
notebook
Slip2k
bushing wrench
allen wrenches
rule book
mag brush
squib road
cleaning kit
spare fiber for replacing on the front site
spare mag springs and recoil springs
timer
-
Guys and gals,
While we are talking about this, what recoil spring/rod are you guys using for the .40 Edge? I have one that I bought earlier this year that I have only put about 50-100 rounds down range with it. I shot Glocks all year shooting Production, but have plans to run it in Limited in 2016 some with the Edge. I will be shooting major with 175 gr hi-tech coated TCBB.
Thanks in advance guys. Have a safe week.
EW
Dawson tool-less, 12lb spring from WIlson (they seem to fit over the guide rod better; make less noise than the Wolff's), and an EGW buffer. I replace buffer whenever it gets chewed up. Replace spring roughly every 3k rounds, or when I remember to do so.
-
I had a trigger job done, added a Dawson ICE magwell, and tool-less guide rod. that's about it.
You shoot a lot of the local Indy-area matches?
That's what I did with my Eagle. I also added a steel mainspring housing and a 12.5lb recoil spring. Very good crisp 2lb trigger. Damn thing isn't even fun shooting at the public range under 25yds. Thing shoots itself.
I forgot about that - recoil spring.
When I got it, I looked at the springs I had, ordered some to fill in the gaps, then went to the range and tested a bunch to see what worked for me, my loads, my grip, etc.
Settled on a regular 12 lb spring.
-
I had a trigger job done, added a Dawson ICE magwell, and tool-less guide rod. that's about it.
You shoot a lot of the local Indy-area matches?
-
FYSA: generally, the reason they won't fit is bc those kydex holsters tension that "click" on the trigger guard. So a holster for a 1911 w a rounded trigger guard won't have the same fit as most 2011's w squared trigger guards. Then you also have to consider long/short dust covers as mentioned previously
-
Dat serial number doe...
-
When do we get pics and reviews?!?!
Uses/how to's for range diary
in Training Techniques
Posted
Consider reflecting on what you were thinking about/focusing on. Especially from the frame of: what you planned to think/focus on, what you actually ended up thinking/focusing on, why the difference, and the 'so what' from that deviation.