-
Posts
121 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by icestud
-
-
Thank you All for your replies
Why not Slide Glide? to heavy?
-
So a follow up question, what spring weight should I start with?
-
Thank you Joe4d
-
I have read 5-6 of the threads here about the SA Prodigy's and the first thing I see is the advice to change out the Factory two piece guide rods, I have not seen a reason. Is it because of the two piece design? Or the extra steps when removing and reassembling? What are the Cons of the factory guide rod?
I recently picked up the 4.25" model and have been doing a lot of reading about what people have done to help with the issues. I have only field striped it and did a thorough cleaning of the mating surfaces of the slide to the frame and reassembled it with some Enos standard viscosity Slide Glide. I hope to hit the range this weekend.
Thanks Matt
-
Thank you for taking the time to post the spring info! Much appreciated!
-
Thanks for the spring info! looks like a great mod.
-
Thanks Bob, yes it is. I take it the 1" pipe fits fairly snug in the square hole?
One more question, what is the system you are using to drop the cases through? ( the Spring case feed tube ) Currently I am using the plastic tube from Dillon, I like the idea I can mount my case feeder off center
-
-
Thanks for the tip on the 9mm major, BC
Itdmstr, that is my plan tonight
Thanks Again
Matt
-
Thank you for all the replies. I will add that after I roll size they are not going all the way in the case gauge, some will stick out maybe 3/16 some as little as 1/16
I'm questioning whether or not the dies were ground correctly
I should add this is a mix of ammo I have shot out of several 9s and range pick up brass
Matt
-
For those of you who Roll Size with a CasePro 100, shouldn't the rolled case fall into a case gauge after rolling?
Thanks Matt
-
Lemi Shine
“Original Removes tough spots and film”
is what’s on my label
-
Have you contacted Rick? AKA Mr Bullet Feeder? he's always been very helpful with quick responces.
-
When you search, use Quotation marks around what you're searching for IE "back up camera" that should get you what you're looking for
-
Here's one
-
Replacements can be found at the Dillon web site
Small Tube Part # 20533
Large Tube Part # 20534
Or try McMaster-Carr
I got a piece of Lucite Plastic Tube from ebay that was 3/4 OD 1/2 ID by 24" long and it works great for 9mm, you will have to cut it down from 24" to fit your setup
Matt
-
Sorry I should have copied your question, you asked “Where can I pick up this Kroil”
-
Not being a smart ass, but try Google
-
Get your self some penetrating oil like Kroil and let it soak in for a few days
-
Casepro 100 with Dillon casefeeder, I roll size all my 9mm brass works Great
-
-
What are the advantages of a stand alone mount? I have mine mounted on my S1050 and have not had any issues with 124 gr X-Tream bullets
-
Do you know why the primers were accumulated in the bottom of the magazine shield? Did I miss what Dillon machine this is?
-
As long as you are ordering from Reloading Innovations may as well add the Spill Stop to help with powder spillage. Check out In-Line Fabrication for the case feed stop.
Prodigy 4.25" Factory two piece Guide Rod
in 1911-style Pistols
Posted
Thank you all for your replies and Thank you dtuns for the Video