-
Posts
82 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Metallurgist
-
-
-
FP-10
-
I agree 100%.CKArms all the way. Matt Cheely is the C in CKarms and is a great guy to deal with that does what he promises in a timely manner.
I want to go on record here and now by saying this thread will be locked before the weekend is over. I just have that feeling in my gut.
Is that because of the K in CK? HeHe
-
I completely concur with your description ... I had some rattle in the mag but they functioned wellI ordered 4 of the 140mm 40s&W mags
first time getting them out was last night
-all 4 loaded 21 rounds
-1 had a little rattle, but not salt shaker, quick smack on the base pad it stopped
-pins all pushed out easy
-getting base pad off and the spring out of the way was tricky
-same with lining it back up to get base pad and spring back
-all rounds thumbed out very easy, I have not shot from these
would have liked to have seen the mag bodies polished out like a Brazo's mag, but Brazo's mags are also $20 more each and only 20 rounders reloadable
The base pad and pin set up will be something to see if I like, I have been running Brazo's mags with Dawson base pads for the last several years, so this is a change and we will see how they work out
-
I am not sure either but spoke with a couple of folks at the FL open about it. But let me specify that it is here say
-
Your right, I've already ordered 3 more
-
Got 2 40 cal 140MMS and they fit 21 with a little play
-
I have seen more cracked Caspian slides than STI slides. I like STI slides coz they are harder than Caspian slides. Also, they seat lower into the frame so you get to use #2 to #4 barrel links.
Thank you for that
I have built more than 10 pistols using SVI slides, and so far they haven't cracked. They have very narrow rail widths, about 0.748 in.
The barrel bore is oversize, about 0.705 in. You also have to use their firing pins and firing pin stops. They are slightly different than the standard ones.
-
Thanks as well
-
Thanks for the insightJust curious if there was a reason. I've talked to a handful of smiths and a top level GM who recommended Caspian over STI for slides- none pinpointed a particular reason but it was enough for me. I do have an STI slide on my budget SS rebuild.
My custom was built on a PT frame with a Caspian slide and I fit a Caspian firing pin stop and ejector- that went incredibly well as the parts were clearly spec'ed to fit together. The extractor tunnel was a bit tight.
The STI on the other hand, was a different story. STI slide and two different STI firing pin stops and neither were remotely close to fitting without a lot of filing.
I haven't ever tried to fit SV parts. I know you are sending it to a smith but I liked that all the Caspian parts were so close to start and believe the metal to be of good quality.
-
No reason in particular- I guess I lumped caspian and STI in the same tier but say STIAny reason you are not considering Caspian?
-
Good point Brian
-
I forgot to mention this is for a limited 2011
-
Can yall see any advantage of buying a blank (unmarked-uncut-unfinished) SVI slide over a blank STI slide. It will be sent with a PT stainless frame and grip to a my gunsmith for fitting, slide cuts and Finishing. I have my owns thoughts about it but curious to hear others. Thanks
-
Thanks
-
-
I am not sure if there was already a thread about these magazines, I didn't see one.
Does anyone have and use these mags for and STI grip or PT stainless grip? They are supposed to be tuned and race ready right out of the package....Any pros cons? Thanks
-
Shoot it, plus USA is a great Facility
-
2# on Limited 2011
-
Sorry for the delay, I was out of town. I wanted to take it to a steel match but it was rained out and I then went out of town. I did get extra mags from Sooner state arms as well as an IPSC holster. The mags were about $40 each and the holster was $180. Sooner state said they will be receiving a competition model 2nd quarter of this year with F/O sites and a better trigger. They also mentioned a compact model is in the works
-
Haters gonna hate
-
Damascus Steel is amazing and takes many man hours - It makes for great collector pieces
-
-
I guess another question would be does the SV trigger fit the STI Frame?
Mbx mags with taran springs?
in 1911-style Pistols
Posted
I am interested to here any response in this as well.