[Stock 3 -38 Super- Comp options]

Thanks,

A little more than I wanted to do.

 

Sean

 

[Stock 3 -38 Super- Comp options]

Are there any options on putting a comp or muzzle brake on a Stock 3

 

 

Sean

[Gold Match Extreme 9MM longslide]

Thanks , that's the answer I was looking for . I will wait to see if a 38 Super comes out.

 

[Gold Match Extreme 9MM longslide]

Thinking about this one , but I want a 38 Super or SC.

 What is the thought on rechambering this to 38 Super or 38 SC.

Would the rim of the SC better fit the gun or will work on the extractor be needed no matter what?

 

Thanks 

[tanfolgio limited custom and the extreme]

I bought a 10MM Elite then  bought a 38 Super slide assy from EAA ,  thinking it might need some fitting but the fit was tight but with a little oil and 25 rounds thru the gun, fit was very nice and 100% reliable.

 

Sean

[Which Limited Elite Caliber for is best for...]

I bought the 10MM Elite and a 38 Super upper conversion, no point in any other calibers

Sean

[Open Reflex vs. 10mm]

I put a Burris FFIII on my G40, did NOT old zero . I was continually readjusting the Burris.

Sean

[Educate me about Elite, Match, Pro, Custom models]

I first bought the Tanfo Elite 10MM and a seperate 38 Super upper assy ,trigger is very good and is an accurate pistol.

I then bought a Limited Pro 10MM ,runs good and is accurate. I have since bought a Stock 3- 38 Super and the Elite 10mm upper assy fits perfectly . The Elite is worth the extra money IMO. If I was to sell any of them it would be the Lim Pro.

I have a STI Perfect 10MM and it is worth the money

[What stock slide fits limited elite frame]

The Limited and the S3 are the same 4.75".

The S2 will not work it is 4.5"

Sean

[Limited Pro replacement barrel]

Yes it is ,it seems they only go by barrel length and shape and the Lim Pro is 4.75" and NOT coned.

Sean

[EAA/Tanfoglio Chop Shop - NO SELLING OR TRADING]

Do your other uppers fit your stock 3?

I bought a S3 38 Super off of GB - My upper from my LimPro 10MM does fit the S3 frame. a tiny bit tight but runs very well and is accurate. I also have a Lim Elite 10 MM and a seperate 38 Super Lim upper, have not had time to see if they fit the S3 frame

Sean

[Question about mark underside of slide on 10MM]

I will have to look but I am sure my Lim Elite 10MM and Lim Pro 10MM do not have those marks. I will have to check on the 38 Super upper.

Sean

[Henning shock buff + guide rod]

With the shock buffer installed only , my Lim Elite 10 mm ran perfect , only had time for about 50 rounds.

Sean

[Henning shock buff + guide rod]

I just put 1 (shock buff only)on my Lim Elite 10 and Lim Pro 38 Super but have not shot them . Bow season has started in Texas so I am on stand right now. I hope they run as advertised .

Sean

[Why No Polymer 38 Super?]

I have a Tanfo Lim Pro 38 Super and I would guess that most people endup hot rodding the 38 Super and that will not work well with polymer and the pressures of the 38 Super.

Sean

[New competition for the xtreme!]

I like it. does that make me a bad person??!??? lol

If not bad, at the least not well.

Sean

[Anyone shooting 40 minor with a Stock 2?]

I'm thinking about doing this with a limited pro in .40 minor. The idea being I could use it for USPSA production and IDPA ESP.

Would the mags be interchangeable between the elite limited and the limited pro?

Yes , I have both and they are interchangeable.

Sean

[.40 Cal to 9mm Limited Conversion]

I have a Lim Pro 10MM and Lim Elite 10MM and a 38 Super Conv Upper. The 38 Super Upper fits nicely on both guns ,NO fitting required. The 10MM slides on the other hand will not interchange between guns. So if you buy a 9MM conv upper fitting might be required.

I think you will need to buy the slide and barrel assy. price if you can find 1 - $700

Sean

[22 conversion for the Tang?]

Thnx Atlas

Sean

[22 conversion for the Tang?]

A Limited frame is a 475" bll. , those conversions show a 4.5" bll so they will not work on a Limited frame, is that correct?

Sean

[3 Stock IIIs on Gunbroker]

Will a Limited slide assy fit the Stock III frame, looks like it will ,same 4.75" bll etc...

Sean

[What type of EAA is this?]

EAA should have 10MM slide assy for about $700

Sean

[Limited Pro .40 - load lengths]

I had the exact problem with my Limited 10MM , problem went away after about 500 rounds.

I did not have any problerms with my Lim Pro 10MM or my 38 Super conversion upper.

Sean

[Different trigger needed for Limited Pro 10MM]

I have a Stock SA only trigger if you want one.

Thanks ,

I better wait and see if I like or dislike the stock trigger. I put 50 rounds thru it this weekend and it shot very good.

Sean

[Different trigger needed for Limited Pro 10MM]

yes those triggers are for the SA only guns. if you remove the interuptor your gun will be SA only.

Do you want to keep it DA/SA?

Sorry about the delay, it's turkey season ,no turkey's yet .

Yes I would like to keep it DA/SA.

Sean