[What compares to the Speed Six?]

Something Joe from Mojo Custom Guns put together for me.

[Where to get an action job?]

I really like that hammer. How light is your trigger?

It's a tick under 5 lbs. As smooth as you can imagine. Federal primers are a must. I think the Mojo skeletonized hammer is the key. I don't think there is anyone else do those.

[Where to get an action job?]

I must echo two posts from above. Joe at Mojo Custom Guns (248.867.8685) Is very far priced, his turn around is well within reason and the actions are the best. Here is a photo of just one of the three S&W revolvers he has work over for me. This started out as a 4 inch 64. The other two are 627 and new M66.

[My New BUG-R]

Ty, Wendy and Steve,

You will not be sorry. It has been a complete joy working with Joe at Mojo Custom Guns.

[My New BUG-R]

Thank all for your kind words. It has been a lot of fun putting this all together. From finding the right 64 to start this build with to answering all the questions that Joe had about what would be best for me using this revolver in the BUG-R matches.

Any other questions just let me know.

[My New BUG-R]

MWX40X40 it is 34.5 oz. With some Houge grips that are the same weight as the originals black rubber ones. It is alot of fun to shoot. A steel 8" plate at 30 yards is no issue. Thanks to Joe @ Mojo Custom Guns!

[My New BUG-R]

Thanks Mark,

See you and Kerry on Sunday.

[My New BUG-R]

Jim,

Its not much work! You just get a good revo gunsmith, tell them what you want, then send them your wife's check book..

[My New BUG-R]

Hello everyone,

This has been a project that has finally come together and it all started when IDPA starting the new BUG-R division. This revolver started life as a S&W 64. Custom work, starting with an action job. It has the smoothest trigger pull that anyone could ask for and the barrel was from a model 681, cut down to put it within the new rule book. The front sight machined, fitted and installed. Trigger stop and set screw on the strain screw. Detent balls installed to lockup the crane and second to hold open the cylinder when reloading. The hammer was skeletonized. I hope that I didn't forget anything.

I can't wait for our first local match to try it out.

[Need rec for new IDPA revo]

Does anyone think that the new model S&W 66 has a chance of making it into the new IDPA rule book?

[550b powder metering issue]

Try cleaning the powder funnel. They get shipped with a protective oily coating.

[Your IDPA Wardrobe]

This is my outfit that I like...