crowmag
-
Posts
103 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by crowmag
-
-
I use the same rig for limited and open DAA race master
-
I just ordered a dpp to replace a slide ride
-
40 minutes ago, Steve RA said:
How many Open guns do you see with back up sights ???
0
-
Glass bead blast
-
I use 6061 for prototyping comps they crack get some titanium
-
With a 60 mph wind shooting 124g bullets at major you will have 2 inches of wind drift at 25 yards
-
-
I did some tuning to my 929 trigger today it is 3 pounds 4 oz. to go from 4 pounds I jeweled the rebound slide then polished out some of the jewels with. 10,000 grit wet stone. I also installed a lighter rebound spring. I was hoping the jewels would hold graphite to make a supper slick frame to rebound slide operation.
-
On September 20, 2016 at 3:57 PM, Alaskan454 said:
3.5 is seriously low...what kind of resistance are you getting from the rebound spring itself? Even with fully polished guts I like about 2.75# coming from the rebound spring alone.
To clear up some confusion I was referring to the rebound resistance alone being 1.5 to 2 pounds
-
I am using a double aa
-
Shooting for 1.5 pounds I am at 2 pounds now. I shot a couple hundred tonight with some splits in the .18
-
My 929 is 4 pounds
fed srp with .035 moon clips I machined the firing pin and have been testing them.
i have some springs coming later this week I want to see if I can get it to 3.5 with out light strikes
-
I shot it last weekend open 58 pts 5.42 94.7 for open
-
-
With a 2011 I load Barbie mag rack slide safety remove mag install 30 round mag then holster.
-
+1
I'd rather use my STI Steelmaster in Production since it has a dot .... and a comp .... and a magwell .... and a race holster ... and a mag that holds 30 rds ...I'd rather be able to use race holsters in production like they do in IPSC.
Of course... everybody wants more. More rounds, more holster choices, and on and on...
-
-
I use scotch tape on the left lines of my shooting glasses to blur out the sight on the gun.
-
I would start with 124 gn Bullets, I use autocomp for 9 major
-
I just ordered some to see for myself the cost savings - accuracy debate
-
I use Mbx guts and they work in my Bedell
Open gun
-
I have been happy with the medium AA pack. I carry 2 open guns 400 rounds of 9mm tool kit food and water I shoot 4 or 5 matches a month and take it to the range 2 times a week. It's going on its 2nd year.
-
7 yards 1.64
Draw to first shot .74
I did have 1 close C on the middle target on the second shot.
-
DAA race master works for members
Holster for 6 inch limited gun
in 1911-style Pistols
Posted
I like the DAA holsters for open and limited