-
Posts
68 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by SAFuchs
-
-
First batch came out really nice!
-
Excellent, Luckily I have a .380!! Thanks steve. I did a search and got some good info.
-
This is Great, Just getting into wet tumbling, have the first batch of .45s ready. Thought i'd do this set de-capped. I've had the Dillion large separator for 25 + years. Will be interesting. What is the recommended water/soap/lemishine mix?
-
I have an original 550 before the "B" designation and the unit fits and works very nicely. Are you talking the return spring under the platform?
-
The GRX is nice but have split two of the carbide versions. I noticed a line in the brass, then inspected the die. found the hairline crack. They replaced it once. Been running 10 mm lubed cases through it.
-
Picked up the same MI handgaurd for my M&P 10, Expertly threaded barrel from our above friend, ready for a little me and vice time to make it all one!
-
Both frames done and picked up. Look nice, not your average "Flat black" more of a greenish on one. Fits to the color I like.
-
Sometimes just verbalizing it helps!
-
I also have an older machine, I've don the upgrades myself, because I could even drilled the lube hole in the upper pin arms. I wish I kept count on the number of rounds I loaded. She is still chugging away. I treat myself with a new add on now and again. The bullet tray and brass hopper I should have had a long time ago! Next is the trimmer....Christmas is coming....
-
First and middle initial last name
-
Have the place in Lowell Doing it T & T, Hard anodizing that is, Will let you know the result.
-
And a host of other places.
-
Brownells I presume
-
There is a place in Braintree and one in Lowell, Web search. I'll see what they say.
-
Thought anodizing would be the best first step, Now to find a place, Dan, do you know of any in the area?
-
Issue: Raw aluminum lower, formally an 80 %er. Which coating would stand up best or does it matter? Thoughts? Concerns? General discussion?
Thanks for your impending wisdom!
-
That's my issue or when there is one I'm not available. I want to shoot in multiple divs. so for me the more the merrier!
-
I can and is if you make it that way. Practice practice practice.
-
M&P 9c, or hk P7M8 or Para P12.
to many choices to little time!
-
As long as you get the bevel in the right place, make sure your finger is not in the TG
-
Might have to sell my Kimber polymer for the G40, that is if I can get one in the great state of MA...
-
Still shoot 10's from my early issue G20, although with the amount of 40's I pick up I may have to get a 40 barrel!
-
Had the nose dive issue with two mags, changed all to wolf's X10%
-
L 439 not the lowest but..
Blue bullets = blue fingers?
in 10mm/40 Caliber
Posted
Gloves are the way to go as long as they fit right.