-
Posts
7 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by yellow
-
-
Huh??? I have EG grips on both my large frame limited custom and my gold custom eric with henning magwells, and I ordered LARGE frame grips!
You have to get the small frame grips from EG to fit a Tanfo with a magwellDoes the large frame magwell fit with EG's aluminum grips?
I don't think small frame grips will ever fit a large frame pistol!! Aluminum sp01 shadow grips should fit a small frame tanfoglio, but they do NOT fit a large frame tanfoglio at all!
-
To determine the headspace, I just take an empty case, and I make a cut over the complete length of the neck of the case with my dremel.
Then I just push in a bullet a few millimeters, and I insert the case with the bullet in the chamber of my gun. Then I close the bolt of my rifle, so the bullet gets pushed into the case by the lands & grooves. Now just eject the case from your rifle. You should make your rounds a litlle shorter than this one.
-
I had problems with this when I started reloading 223 for my STI AR15.
I installed the dies like dillon explains in the manual, so the die touching the shellplate, and then turn back off a little.
This way my brass fitted the dillon case gauge perfectly, but when I made a few dummies I had a lot of difficulties retracting them back out of the gun! The cases were stuck in the chamber and I had to pull the charging handle with my 2 hands (and someone else holding the gun) to get them back out!
People told me to turn the die 1/6 deeper instead of backing off, and this solved my problem completely.
-
I can run 7-800 9mm cases in mine without any problems. Haven't tried to run more, but I don't think 1000 pcs would be a problem either.
-
just call me; 720 325 7890. I am in/out of the office a lot these days. So catch me ;-)
Can we also get this discount at the distributor in Holland?
-
Who has a 357 sig conversion for his XFive in 40S&W?
Where does your barrel come from? From Sig Sauer? From IGB?
Is ot drop in, or does it require some gunsmithing?
Can you recommend it? Or are there a lot of problems?
Please let me know.
Best regards
STI mags rusting
in Open Pistols
Posted
My gunsmith is building a custom 2011 for me right now. My mags are TiN coated. We'll see how it works out..