newboy
-
Posts
56 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by newboy
-
-
The tool head is always pressed upwards when seating, so I don't see how it could affect your OAL. But if it bothers you, you can shim it one way or the other. I Heli-Coiled the tool head, and replaced the pins with screws which hold the head tight to the top, eliminating the slop.
I think slop or a warped case holder would be more likely.
-
Are you trying to seat and crimp simultaneously?
-
Best carry gun ever made.
-
That's news to me. Every single person I know that's PC pure and ran it at 9 velocities has has nothing but issues. 45 guys I know are doing it all day long with no leading, keyholes, etc.I cast pure lead with about 1% solder, pc, for 9mm, IDPA loads.
Well, it is mostly because they don't know what they are doing. The fit of the bullet to the bore is critical.
-
I cast pure lead with about 1% solder, pc, for 9mm, IDPA loads.
-
If you do find it to be pure lead, the muzzle loading guys will trade you for it.
-
Good find.
Find a scrap yard with an X ray spectroscopy gun. They will tell you the composition.
-
Well my finger was going faster than my brain when I said AP was illegal in rifles, I meant handguns.
But I have no excuse for the Teflon. Thanks for the link.
-
Maybe you are right.
I know AP bullets are not illegal for rifles. But the last time I read the BATF definition of AP pistol bullets they referred to brass, bronze, steel, and Teflon specifically.
Anyone got the specifics?
-
I would caution that adding Teflon to your paint would fall into a definition of illegal "armor piercing" bullets.
-
I would try not to drop it onto a hard surface.
-
You do realize that you just disabled the drop safety, don't you?
-
Absolutely for mixed brass.
-
I have owned both the LNL and the 650. I gave the LNL to a friend, and kept the Dillon.
If you ever look in the IDPA magazine after the finals, they list equipment used. There is a reason these high volume shooters are using Dillon reloader by something like 98 to 2.
-
I am all for it.
-
Bill Jordan
-
There are a LOT more IDPA matches around here than USPSA, so that should tell you something.
-
You need to do some reading. The noise reduction at the frequencies of gunshots is closer to 37.
-
Why do people keep saying the MSA Sordin are low attenuation. They are maybe the best. Do some reading.
-
The problem with the Uplula is, you have to have something like a table to push on.
The HKS lets you load without a table.
-
Make sure you don't have the large flat washer under the shell plate. I put it on top for 9's.
-
ArmorAll is slick, and doesn't have the acetone that your fingernail polish does.
-
I liked it for the couple of months it worked. Then it broke. Didn't buy another.
-
MSA with the gel cups. Sometimes I put plugs underneath.
IDPA, tear down this wall!
in IDPA Shooting
Posted
Then accept the challenge, and quit complaining about the rules.