[6.5 Creedmoor Dillon Caliber Conversion]

Thanks for the info

[RIP Jim Scoutten]

Rip sir

[My friend "wannabe" AKA Doug Fox]

Wow, he was one of the best!

[Sig 320 ,21 rd magazines]

Thanks Alma, R34per thanks for the thread drift ... it was entertaining

[Sig 320 ,21 rd magazines]

Nice

[Sig 320 ,21 rd magazines]

Yeah I'm going to buy a couple for 3 gun only

[Sig 320 ,21 rd magazines]

http://store.sigsauer.com/catalog/product/view/id/8029/s/p250-p320-full-size-21rd-9mm-magazine-extended/

[Sig 320 ,21 rd magazines]

Has anyone used the stock Sig 320, 21 round magazine. I saw that Taylor freelance and Springer has a aftermarket base pad.The sig seems like a better buy

[Micro MOA 16" barrel, rifle gas?]

Hey guys I'm lucky enough to be sponsored by MicroMoa.com . I did run the fluted 16" barrel with rifle length gas,and Govnah gas block. MicroMoa helped set up the gas for light load , suppressed, and wide open gas. I really enjoyed running the 16". The rifle ran like a top. My setup was a lightweight BCG, JP silent capture spring, Hiperfire trigger,and SJC titan. This rifle was setup for limited, but have since switched to a the 17.3 for tac optics just for a little bit more velocity, also running a CMC trigger. Both rifles shoot ridiculous soft. What's nice about the govnah gas block is you can change to wide open gas on the fly.

I used a Nordic 18" with Seekins gas block before switching to MicroMoa. The last Task Force Dagger match on a long range stage I was using 69 smk's . Well the Nordic went single action . If I had the Govnah gas block. I could adjust the gas on the fly and finish the stage successfully .

If you like options look at the Govnah gas block as well as the MicroMoa barrel- they are very accurate and shoot sub moa with Black Hills 77 gr ammo.

JP

[SLR solo ultralight]

It's awesome, balanced perfectly.

anyone have any experience with the SLR solo ultralight hand guard? Pros? Cons? Seems very light.

[June 21st and 22nd 2014- The Freedom Munitions Memorial Multi Gun Matc]

Contact Charles Sole, his contact info is on the Tarheel website.

[Benelli Recoil Spring Replacement Question?]

Replaced mine a couple of months ago, little heat to break the loctite should do the trick.

[Any one using 1.5-6 MTAC on a .223? looking for holdovers]

Nate I recommend you get a ballistic app, and input your FPS, wind speed, ballistic coefficient , etc. The Strelok app is a great resource for what your looking for . Good luck

[Help Please - M1 Feeding Problem]

I've had this same problem with a M2. How often do you clean the SG? I never used to clean mine. I noticed after decent cleaning and lube. The M2 functioned like a top. Good luck

[3 Gun Nation Regional Series Updates]

Look forward to competing in SE and MW regionals.

[Everglades .223 ver 1 w/H335]

Sir you could pull 2-3 of the .223 ammo that you have . It might help you to get close and work up or down .

[2014 TASK FORCE DAGGER 3 GUN CHAMPIONSHIP - March 28-30, 2014 - Legion]

I didn't get to shoot this last year, but my favorite would have been the one that caused the most pain by the end of the 240 seconds.

That was actually pretty hard to judge. The pain of each stage seemed to erase the memory of the previous one.

Haha so true Dave. If you havent sign up yet , get on it . TFD was one of the best matches of 2013 .

[2014 TASK FORCE DAGGER 3 GUN CHAMPIONSHIP - March 28-30, 2014 - Legion]

The house was my favorite, and 2nd would be the hill.

[New to 3 Gun & AR's - help please!]

I'm no expert, but I would have your buddy help you build an AR. I would contact Jeremy or TK at the Shooters Source , they have great deals on building the perfect 3 gun rifle.

Go with any mil spec upper and lower , Nordic .223 Wylde 18" barrel rifle length or if set on carbine length white oak armory has a nice 16" barrel as well, free float tube , a muzzle brake - miculek, JP, Titan etc, and a drop in trigger - CMC, hiperfire, JP etc, low profile gas block , rifle length buffer and stock to take advantage of the lower recoil. All the companies listed are big supporters of the sport and their products work well. Welcome to 3 gun!

[RCBS Small Base 223 Rem Dies]

I have the same setup you have and it works awesome. I don't particularly care for the dual purpose seat/ roll crimp die. For me if I didn't have the bullet seated completely straight , it would cant and fall inside the case. I switched to a dillon seat and crimp die, and no longer have that issue.

My friend purchased the rcbs AR dies and there really isn't any difference. Hope it helps

[Best kept secret on budget great shotgun.]

Looks like a Nordic components barrel clamp

[3 Gun Nation Regional Series Updates]

If you want to keep your match schedule - you can keep your match schedule ...... Sike!

I'm glad I didn't miss anything by going on that med call at 8:55

[Matchsaverz failure]

Pm sent

[2-Gun: Here to stay or Fad?]

Paul glad you made it to the match, and I think you are going to be hooked after you shoot TFD.

I shot the USCA match . The match was fun , but I didn't care for a couple things in the match. I think it will draw some new shooters into multigun. I will go again next year if it doesn't interfere with any Major 3G event , that I plan on going to.

I thought for the most part they did a good job , but just have some growing pains and need a better way of scoring. I was also bummed they threw out the only long range stage .

[Vortex scope: do you have any new 2014 product insight? Specifically 1]

I called Vortex two weeks ago and asked the same question. They basically said they get that question asked all the time , but didn't have any plans on changing the current model including the weight.