-
Posts
13 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by TY47118
-
-
Check out this web site,(www.utahshooters.org) not much going on during the week, and matches are on Saturdays. SLPSA will be having a steel match this coming Sunday at the Lee Kay Center.
-
I had the same problem, needed 3.1 and couldn't get it. I called Dillon and they told me to get the extra small powder bar.
-
MGM sells these, http://www.glocktails.com/
-
Went to the range today to chrono another load, this time my load was, E3 = 2.8, 9mm - 147 Precision Bullets, OAL = 1.105, Federal SP primers, mixed brass out of a CZ SP01. Temp was about 75 degrees. I'll probably will go to 2.7 for a load.
String 1
1. 914
2. 895
3. 895
4. 922
5. 904
6. 890
7. 907
8. 939
9. 904
10. 904
Lo - 890
Hi - 939
Avg - 907
ES - 48.79
SD - 14.52
PF - 133
String 2
1. 876
2. 902
3. 948
4. 893
5. 925
6. 904
7. 908
8. 887
9. 903
10. 918
Lo - 876
Hi - 948
Avg - 906
ES - 72.08
SD - 20.34
PF - 133
I filmed a couple of shots and it appears to be just as smokey as the N320 load I am shooting.
-
I tried E3 for the 9mm, have only tested one load, didn't have time to do more but will this weekend. This is out of a CZ SP01, E3 = 2.3, 147 precision bullet, OAL = 1.105, federal SP primers, and mixed brass. Temp was around 90 degrees... I have been using N320 and thought this shot just as good....
Wow, only 2.3 grains. I was thinking 3.0 to 3.2 at about 1.125" or so. Seems like I would have been on the hot side. Let us know how it goes. I have a pound sitting here waiting for more results!
I'm thinking for a 130 power factor it will end up around 2.7 or 2.8, since the 2.3 was only a power factor of 115... I tried loading longer but this CZ will not run 147's longer than 1.105...
-
I thought it was for data on E3 powder...
-
I tried E3 for the 9mm, have only tested one load, didn't have time to do more but will this weekend. This is out of a CZ SP01, E3 = 2.3, 147 precision bullet, OAL = 1.105, federal SP primers, and mixed brass. Temp was around 90 degrees... I have been using N320 and thought this shot just as good.
First string
1. 783
2. 794
3. 786
4. 817
5. 780
6. 786
7. 788
8. 798
9. 787
10. 772
Lo - 772
Hi - 817
Avg - 789
ES - 44.99
SD - 12.08
Second string
1. 803
2. 781
3. 776
4. 780
5. 783
6. 769
7. 785
8. 793
9. 790
Lo - 769
Hi - 803
Avg - 784
ES - 33.79
SD - 9.94
-
Other places that sell moly bullets are: www.billybullets.com and www.pathfindersports.com. Pathfinder has free shipping on orders over $70.
-
May want to try Bear Creek Bullets, http://www.pathfindersports.com. They seem to be like Precisions. They have free shipping if over $70 and my order took about a week to get to me.
-
Looking at the Blade Tech holster, which one would you get, the belt holster or the dropped and offset holster?
Swapping tumbler safeties with D type safeties
in CZ
Posted
You could do a swap to the CZ 85 Combat safeties,
http://czcustom.com/czsafteyrhssathumbler.aspx
http://czcustom.com/cz75salhhandnormalsafety.aspx