Wrinkles
-
Posts
37 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by Wrinkles
-
-
Who makes 2011 type slides that anyone can buy ?
-
Who makes 2011 type slides that anyone can buy ?
-
Any suggestions for PWS 9 mm PCC trigger ?
-
I have tried 115 Berrys , 124 Berrys , 147 berrys with OAL from 1.10 too 1.160.
It will not feed any hollow points .
-
put in a Hyperfire 3.5 and it seems to be running great. I am having some issues if i load the Glock magazines to 32 rounds , it slams the first 3 rounds into the side by the barrel, after that it runs good , does it with all the 32 round glocks ,but not with the cheap see thru plastic or the 16 round glocks . Ideas ?
-
Need a trigger for a Palmetto PCC what do you recommend .?
-
I have a caspian double stack and want to put on a 6" barrel and comp. Who does that ?
-
It appears to be the original barrel I had it NP-3 as i was going to hunt bears in Alaska , but ended up taking another gun . I have had it for over 30 years .
It shoot very well and is definately a 300 H&H chamber .
-
I have a model 70 Pre 64 winchester made in 1949 . On the barrel it says 300 MAGNUM , but it is not a 300 winchester mag . It is a 300 H&H. Is this possable or did some on change out the barrel ?
-
I have 2 brand new Chip McCormick , 10 rounders , 2 tripp 10 rounds , 2 Wilson 10 rounds . Shot them all yesterday at in IDPA match . With one in the chamber then 10 in the magazine the only ones you didn't have to slam in and I do mean slam in are the tripps.I am shooting them in a Springfield 9 mm . They all work the same after 2 rounds are gone. Have not tried the dawson, but understand tripp makes the tubes for dawson and dawson puts on their base pads, but I have been wrong three times today already. From my limited experience I would use the tripp's.
-
The video was great ,but double alpha said they no longer make them. I have VZ on my list to see on Wednesday. at the shot show.
-
I am going to the shot show next week and will be looking a lot of these people up. I didn't see Perman as one of the exibitors. Then decide what to do. I will try to get a picture .
-
It is my weak hand and if i grip any harder I will bend the frame . HA I have been trying to do 30% with strong hand and 70% with weak hand . I an sure I have lost a lot of strength in my hands as i am old !
I have skate tape on the front and checkering all the way down the mainspring housing . I will try working to strengthening my grip ,as I have lots of time.
I an not familiar with the Perman grip ,but will look into it. I like the idea of bondo also. I have some old plastic grips I will start with . I thank all of you for you information.
-
I have a 1911 9 m m and as i fire i keep having to reposition my left hand ,have tried skate board tape ,then it eats up my hand. Was thinking of a big lump of something to hold the palm in the same place ,the right side is fine.
-
I have the Browning 1911-22 very fun to shoot ,but has a terrible trigger and no adjustable rear sights.
-
The S&W 41 is just to much. How about a Sig. All the ideas were great now I have to make up my mind which one. I have 4 to get.
-
I am getting ready to buy some 22 pistols for my grand children for Christmas.
I want the following 1. will shoot 95% of the time with about any ammo . 2 has a safety. 3. a good trigger ,not something like a Glock. 4. adjustable rear sight . 5. can get extra magazines.
Our club will let youth shoot I D P A matches with a 22. I want to get them starts right.
-
Thank You for your ideas.
-
I just got a new S&W C.O.R.E ,put in an apex trigger , 5" barrel ,9mm have decided to put on a RMR adjustable LED . Not sure which size I want the 6.5 or 3.5. Will shoot it in fun matches ,or maybe
an uspsa match where I don't have to run much.
Any ideas ?
-
According to a article in a Gun magazine the top 5 states for over all laws on CCW, suppressers, full autos , was Arizona 1st, Georgia 2nd, Alaska 3rd, Utah 4th and I have already forgot the 5 one ,but I think it was one of the Dakotas.
for what it is worth on gun friendly places.
-
I called Eagle grips ,but they will not inlay. Thanks
-
I have a nickel 1911 and would like to put ebony grips on it with my initials put in with silver. where can I get some.
-
Put in a 18 lbs in main spring and checked all the reloads and things are running nice again. Thanks for all the information.
-
The pistol is a stock Springfield ,had a 12.5 lbs recoil spring in it changed to a 14 lbs. Cleaned the firing pin tunnel and the whole gun as well. The pencil only went up about 2 feet. Save my Federal primers for my revolvers.
Use Winchester primers 3.7 grs of Alliant E -3 , with a 147 gr. Xtreem bullet. I paid more attention to my reloads and will try it tomorrow.
2011 slides not made by STI that you can buy ?
in Open Pistols
Posted
Thanks for all the help .